The Paton Welding Journal, 2010, №04



2010 №04 (05)

2010 №04 (07)

---

TPWJ, 2010, #4, 25-29 pages
 
PLASMA ZrO₂ COATINGS WITH METALLIC BOND COAT OF ALLOY AlCuFe


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 4, 2010 (April)
Pages                      25-29
 
 
Authors
A.L. BORISOVA, L.I. ADEEVA, A.Yu. TUNIK, T.V. TSYMBALISTAYA and A.P. GRISHCHENKO
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
The article present results of investigations of structure, phase composition and microhardness of thermal barrier plasma coatings produced by using quasi-crystalline alloy AlCuFe with a different content of the ψ-phase as a bond coat material instead of traditional alloy MeCrAlY (Me-Ni, Co, Fe). Formation of phases in the ceramic ZrO₂ layer was studied depending upon the ψ-phase content in the bond coat of a thermal barrier plasma coating.
 
 
Keywords: thermal barrier plasma coatings, powders, zirconia, alloy AlCuFe, quasi-crystalline phase, structure, coating properties
 
 
Received:                ??.??.??
Published:               28.04.10
 
 
References
1. Ivashko, V.S., Iliyushchenko, A.F., Okovity, V.A. (1989) Technological possibilities of plasma spraying of thermal barrier coatings. In: Transact. on Thermal and Vacuum Coatings in Power and Engine Engineering. Kiev: PWI.
2. Iliyushchenko, A.F., Okovity, V.A., Kundas, S.P. et al. (2002) Formation of thermal coatings: theory and practice. Minsk: Besprint.
3. Iliyushchenko, A.F., Ivashko, V.S., Okovity, V.A. et al. (1998) Thermal barrier coatings on the base of ZrO₂. Minsk: NII PM s OP.
4. Rutman, D.S., Toropov, Yu.S., Pliner, S.Yu. et al. (1985) High refractory materials of zirconium dioxide. Moscow: Metallurgiya.
5. Kanygina, O.N., Pak, K.M. (1996) Effect of yttrium, calcium and aluminium oxides on structure and properties of zirconium ceramics. Vesti KGNU. Nat.-Techn. Sciences Series, Issue 1, 53-56.
6. Noskova, N.I., Ponomaryova, V.G., Yartsev, S.V. et al. (1995) Quasicrystalline phases in Al-Mn and Al-Cu-Fe alloys. Fizika Metallov i Metallovedenie, 79(2), 80-86.
7. Noskova, N.I., Yartsev, S.V. (1994) Quasicrystalline phases. Ibid., 78(6), 34-38.
8. Prevarsky, A.P. (1971) Investigation of Fe-Cu-Al system. Izvestiya AN SSSR. Metally, 4, 220-222.
9. Borisov, Yu.S., Borisova, A.L., Adeeva, L.I. et al. (2003) Thermal coatings with quasicrystalline phase, properties and applications (Review). Fizika i Khimiya Tv. Tila, 3, 456-465.
10. Pliner, S.Yu., Dabizha, A.A. (1987) Strengthening of ceramics from zirconium dioxide at the expense of tetragonalmonoclinic transformations. Ogneupory, 3, 58-62.
11. Borisov, Yu.S., Panko, M.T., Adeeva, L.I. et al. (2001) Technologies for production and properties of powders of the Al-Cu-Fe system for thermal spraying of coatings with quasicrystalline structure. The Paton Welding J., 1, 45-50.
12. Borisova, A.L., Tunik, A.Yu., Adeeva, L.I. (2006) Structure and properties of powders of Al-Cu-Fe system alloy for thermal spraying of quasi-crystalline coatings. Ibid., 12, 19-26.
13. Sordelet, D.J., Besser, M.F., Anderson, I.E. (1996) Particle size effects on chemistry and structure of Al-Cu-Fe quasicrystalline coatings. J. Thermal Spray Techn., 5(2), 161-174.

---