The Paton Welding Journal, 2020, №03



2020 №03 (02)

DOI of Article 10.37434/tpwj2020.03.03

2020 №03 (04)

---

The Paton Welding Journal, 2020, #3, 19-24 pages
 

Welding in power engineering industry of Ukraine

A.K. Tsaryuk¹, E.V. Levchenko², M.M. Grishin², A.V. Vavilov², A.G. Kantor³ and A.I. Bivalkevich³

¹E.O. Paton Electric Welding institute of the Nas of Ukraine 11 Kazymyr Malevych str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
²Jsc «Turboatom» 199 Moscowskyi Prosp., 611037, Kharkiv, Ukraine. E-mail: office@turboatom.com.ua
³sE «atomremontservis» 7 Entuziastiv Prosp., 07100, Slavutych, Ukraine. E-mail: kanc@arc.atom.gov.ua

Abstract
review of some PWi works on creation of advanced technologies of welding the equipment for enterprises of power engineering sector of Ukraine is presented. approaches to producing welded rotor structures, and combined joints of high-temperature components of equipment of thermal power plants are described. information on improvement of the technology of welding thick-walled pipe elements from 10gN2MFa steel for NPPs is generalized. The gained experience forms the basis for solving new problems in the power engineering sector of the country. 12 ref., 3 Tables, 9 Figures.
Keywords: welding rotors, automatic submerged-arc welding, narrow gap, combined joints, manual arc welding, connection of steam generator with the main circulation pipeline, automatic argon-arc welding

Received 06.02.2020

References

1. Zemzin, v.N., Frenkel, L.D. (1962) Welded structures of steam and gas turbines. Moscow, Leningrad, Mashgiz [in russian].
2. Morachkovskyi, O.K., Dmitrik, v.v., Usatyi, O.P. et al. (2018) Development of rotors of high power turbines. Kharkiv, FOP Panov a.M. [in Ukrainian].
3. German, S.I., Tsaryuk, A.K., Dneprovsky, G.V. et al. (1980) Automatic narrow-gap submerged-arc welding of alloyed steels. st.-Petersburg, Energomashinostroenie [in russian].
4. Tsaryuk, A.K., Kasatkin, B.S., Ivanenko, V.D. et al. (1980) Mechanized narrow-gap submerged-arc welding of thick metal. Avtomatich. Svarka, 10, 47−51 [in russian].
5. Tsaryuk, A.K., Skulsky, V.Yu., Moravetsky, S.I. (2016) Mechanized narrow-gap submerged-arc welding of thickwalled cylindrical products. in: Proc. of Medovar Memorial Symposium (7−10 June 2016, Kyiv, Ukraine). Kyiv, Elmet-roll, 82−90.
6. Subotin, V.G., Levchenko, E.V., Shvetsov, V.L. et al. (2009) Development of new generation steam turbines of 325 MW power. Kharkiv, Folio [in Ukrainian].
7. Tsaryuk, A.K., Moravetsky, S.I., Skulsky, V.Yu. et al. (2012) Development of forge-welded combined medium-pressure rotor for 325 MW steam turbine. The Paton Welding J., 8, 36−41.
8. Skulsky, V.Yu., Nimko, M.A., Tsaryuk, A.K. et al. (2018) Welding and heat treatment of joints of steels 15Kh1M1F + 15Kh12vNMF. in: Coll. of Poster Papers of Int. Cont. on Welding and Related Technologies — Present and Future (5−6 December 2018, Kyiv, Ukraine). Kyiv, PWi, 50−51.
9. Karp, I.M., Smikhula, A.V. (2016) The draft concept on modernization of thermal energy of Ukraine. in: Proc. of 12th Int. Sci. Conf. on Coal Power System: Ways for Reconstruction and Development (21−24 September 2016, Kyiv, NANU), 3−7.
10. Volchyn, I.A., Dunaevska, N.I., Gaponych, L.S. (2013) Prospects of implementation of clean coal technologies in power engineering of Ukraine. Kyiv, gNOZis [in Ukrainian].
11. Skulsky, V.Yu., Nimko, M.A., Tsaryuk, A.K. et al. Welding of combined joints of chromium steel Kh10crMovNb91 with low-alloy steel 15Kh2M2FBs. Ibid., 51.
12. Tsaryuk, A.K., Skulsky, V.Yu., Kasperovich, I.L. et al. (2006) Development and certification of automatic narrow-gap argon-arc welding technology of McP Dn850 elements at NPP. The Paton Welding J., 5, 19−25.

---

Suggested Citation

A.K. Tsaryuk, E.V. Levchenko, M.M. Grishin, A.V. Vavilov, A.G. Kantor and A.I. Bivalkevich (2020) Welding in power engineering industry of Ukraine. The Paton Welding J., 03, 19-24.

---