The Paton Welding Journal, 2007, №05

2007 №05 (05)

2007 №05 (07)

---

The Paton Welding Journal, 2007, #5, 25-29 pages

New electron beam equipment and technologies of producing advanced materials and coatings

N.I. Grechanyuk, P.P. Kucherenko, I.N. Grechanyuk

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
The paper describes the current achievements of SPC «Gekont» in the field of practical application of the technologies of vacuum melting and evaporation of materials for deposition of thermal barrier coatings of MeCrAlY and other systems on gas turbine blades, producing condensed composite materials for diverse electric contacts, remelting the wastes of metals and alloys to produce sound ingots. Information on development and application of specialized equipment is given.
Keywords: electron beam technologies, melting and evaporation in vacuum, deposition of thermal barrier coatings, condensing composite materials, remelting of metals and alloys, gas turbine blades, electric contacts, specialized equipment

References

1. Movchan, B.A., Malashenko, I.S. (1983) Vacuum-deposited heat-resistant coatings. Kiev: Naukova Dumka.
2. Zuev, I.V. (1998) Treatment of materials by concentrated energy flows. Moscow: MEI.
3. Grechanyuk, M., Kucherenko, P. Installation for electronray coatication of coatings. Pat. US 6,923,868 BZ. Publ. 02.08.2005.
4. Grechanyuk, N.I., Kucherenko, P.P. Installation for electron beam deposition of coatings. Pat. 2265078 RF. Publ. 12.27.2005.
5. Novikov, A.A. (2003) Gas-discharge gun and method of its control. Pat. 60377 Ukraine. Publ. 2003.
6. Zolkin, A.S. (1992) Sources of metal vapors for research and technologies. Novosibirsk: ITF.
7. Grechanyuk, N.I., Kucherenko, P.P., Osokin, V.A. et al. (2000) State-of-the-art and prospects of development of thremal barrier coatings (TBC) for gas turbine blade units and equipment for their deposition. Novyny Energetyky, 9, 32–37.
8. Grechanyuk, N.I., Dyatlova, E.K., Kucherenko, P.P. et al. (2001) Electron gun with linear thermocathode for electron beam heating. Pat. 40664 Ukraine. Publ. 2001.
9. Grechanyuk, N.I., Kucherenko, P.P., Osokin, V.A. et al. (2001) Protective coating for gas turbine blades. Pat. 42052 Ukraine. Publ. 2001.
10. Grechanyuk, N.I., Osokin, V.A., Shpak, P.A. et al. (2005) Influence of technological parameters on structure of external ceramic layer in two-layer metal-ceramic coatings produced by electron beam deposition in one technological cycle. Poroshk. Metallurgiya, 3/4, 41–48.
11. Grechanyuk, N.I. Method of production of microlayer thermostable materials. Pat. 2271404 RF. Publ. 03.10.2006.
12. Iliinsky, A.I. (1986) Structure and strength of lamellar and dispersion-strengthened films. Moscow: Metallurgiya.
13. Grechanyuk, N.I., Osokin, V.A., Afanasiev, I.B. et al. Composite material for electric contacts. Pat. 34875 Ukraine. Publ. 2001.
14. Borisenko, V.A., Bukhanovsky, V.V., Grechanyuk, N.I. et al. (2005) Temperature dependences of statistical mechanical properties of microlayer composite material MDK-3. Problemy Prochnosti, 4, 113–120.
15. TU U 20113410.001-98: Dispersion-strengthened materials for electric contacts.
16. TU U 31.2-20113410-003-2002: Electric contacts on the base of dispersion-strengthened materials.
17. Shpak, P.A., Grechanyuk, V.G., Osokin, V.A. (2002) Effect of electron beam remelting on structure and properties of high-speed steel R6M5. Advances in Electrometallurgy, 3, 12–14.
18. Grechanyuk, N.I., Afanasiev, I.Yu., Shpak, P.A. et al. Method of production of blanks for tools from high-speed steel. Pat. 37658 Ukraine. Publ. 2003.
19. Melnik, V.I., Melnik, I.V., Tugay, B.A. et al. (2006) Technological equipment for electron beam refusing on the base of glow discharge electron guns. Elektrotekhnika and Elektronika, 5/6, 119–121

---

Suggested Citation

N.I. Grechanyuk, P.P. Kucherenko, I.N. Grechanyuk (2007) New electron beam equipment and technologies of producing advanced materials and coatings. The Paton Welding J., 05, 25-29.

---