The Paton Welding Journal, 2012, №01



2012 №01 (11)

2012 №01 (01)

---

The Paton Welding Journal, 2012, #1, 48-50 pages  

INFLUENCE OF SURFACTANTS ON PHASE FORMATION DURING PRODUCTION OF Al-Cu-Fe SYSTEM POWDERS FOR THERMAL COATINGS BY THE METHOD OF MECHANOCHEMICAL SYNTHESIS

A.N. BURLACHENKO and Yu.S. BORISOV

E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Influence of the quantity and methods of adding surfactants on phase formation during mechanochemical synthesis of composite powder of Al70Cu20Fe10 system was studied. It is established that surfactant application allows avoiding sticking of charge compounds to the drum wall and intensifies the process of new phase formation.
 
 
Keywords: thermal coatings, powders, mechanochemical synthesis, surfactants, sticking, phase composition, quasicrystalline phase
 
 
Received:                15.07.11
Published:               28.01.12
 
 
References
1. Tjong, S.C., Chen, H. (2004) Nanocrystalline materials and coatings. Materials Sci. and Eng., 1/2, 1-88.
2. Ragulya, A.V., Skorokhod, V.V. (2007) Consolidated nanostructured materials. Kiev: Naukova Dumka.
3. Moya, J.S., Lopez-Esteban, S., Pecharroman, C. (2007) The challenge of ceramic-metal microcomposites and nanocomposites. Progress in Material Sci., 52, 1017-1090.
4. (2005) Thermal spray coatings having quasi-crystalline phase, properties and applications (Review). Fizyka i Khimiya Tv. Tila, 6(1), 124-136.
5. Borisov, Yu.S., Borisova, A.L., Adeeva, L.I. et al. (2010) Producing of powders for thermally sprayed coatings by methods of mechanical alloying and nanomechanical synthesis. Svarochn. Proizvodstvo, 12, 18-22.
6. Borisova, A.L., Borisov, Yu.S., Adeeva, L.I. et al. (2008) Effect of parameters of mechanochemical synthesis on structure, phase composition and properties of thermal spraying of Al-Cu-Fe system powders containing quasicrystalline phase. The Paton Welding J., 9, 14-21.
7. Borisova, A.L., Adeeva, L.I., Tunik, A.Yu. et al. (2009) Investigation of thermal spraying of Al-Cu-Fe-Ti-Cr-Si system powders produced by mechanochemical synthesis with subsequent annealing. Poroshk. Metallurgiya, 9/10, 31-40.

---

Suggested Citation

A.N. BURLACHENKO and Yu.S. BORISOV (2012) INFLUENCE OF SURFACTANTS ON PHASE FORMATION DURING PRODUCTION OF Al-Cu-Fe SYSTEM POWDERS FOR THERMAL COATINGS BY THE METHOD OF MECHANOCHEMICAL SYNTHESIS. The Paton Welding J., 01, 48-50.

---