The Paton Welding Journal, 2012, №09



2012 №09 (06)

2012 №09 (08)

---

The Paton Welding Journal, 2012, #9, 43-49 pages  

TRANSISTOR POWER SOURCES FOR ELECTRIC ARC WELDING (Review)

V.S. Senchishin and Ch.V. Pulka

Ternopol I. Puluj National Technical University, Ternopol, Ukraine
 
 
Abstract
It is shown that application of induction surfacing is the most promising for flat parts of agricultural machinery with wall (BM) thickness of 2.0-6.0 mm and deposited metal (DM) thickness of 0.8-2.0 mm. In this case, minimum mixing of BM and DM, minimum equipment cost, possibility of mechanization and automation are provided.
 
 
Keywords: surfacing processes, electric contact strengthening, agricultural machinery tools, thin parts, induction surfacing, automation
 
 
Received:                01.06.12
Published:               28.09.12
 
 
References
 
1. Tkachev, V.N. (1971) Wear and increase in service life of agricultural machine parts. Moscow: Mashinostroenie.
2. Bol, A.A., Leskov, S.P. (1985) Induction surfacing of parts in agricultural machine-building. In: Surfacing. Experience and efficiency of application. Kiev: PWI.
3. Vishnevsky, A.A., Kostylev, Yu.A., Ostrov, D.D. (1978) Technology of fabrication of built-up disc cutters. In: Surfacing of parts of metallurgical and mining equipment: Coll. Moscow: NIIInformtyazhmash.
4. Pulka, Ch.V. (2003) Hardfacing the working components of tillage and harvesting agricultural machinery (Review). The Paton Welding J., 8, 35-40.
5. Rabinovich, A.Sh. (1962) Self-sharpening plough shares and other tiller tool parts of machines. Moscow: GOSNITI.
6. Nikolaenko, M.R., Rymorov, E.V. (1976) New technological processes of arc and contact surfacing of rapidly wearing parts of building and road machines. Moscow: TsNIITEstrojmash.
7. Gladky, P.V., Pereplyotchikov, E.F., Ryabtsev, I.A. (2007) Plasma surfacing. Kiev: Ekotekhnologiya.
8. Bouaifi, B., Gebert, A., Heinze, H. (1993) Plasmapulverauftragschweissung zum Veschleissschutz abrasiv beanspruchter Bauteile mit Kantenbelastung. Schweissen und Schneiden, 9, 506-509.
9. Denisenko, M.I., Vojtyuk, V.D. (2011) Increase in service reliability of tools of tillage machines. Pt1 Nauk. Visnyk Nats. Univ. Bioresursiv. Series Technique and power engineering of agricultural sector, Issue 166, 274-284.
10. Kobets, A.S., Pugach, A.M. (2010) Methods and processes of increase in wear resistance of tools of cultivators. Visnyk Dnipropetr. DAU, 1, 61-63.
11. Kuznetsov, Yu.A., Goncharenko, V.V. (2007) Repair and strengthening of plough shares with cermet plates. Vestnik Ros. GAZU, 2, 122-123.
12. Turkin, V.P., Putilin, V.G., Nikolaenko, M.P. et al. (1978) Electric contact surfacing of disk cutters. Avtomatich. Svarka, 2, 74-76.
13. Volkov, D.A. (2012) Improvement of technology of sparcelly-alloyed surfacing of wear-resistant alloy using flux-cored wire: Syn. of Thesis for Cand. of Techn. Sci. Degree. Kramatorsk.
14. Mamuliya, G.E., Murov, G.F., Tyuleneev, V.P. et al. (1984) Contact cladding of tillage machine tools. Svarochn. Proizvodstvo, 2, 37-39.
15. Gelman, A.S., Tsemakhovich, B.D., Chudpovsky, A.D. et al. (1978) Explosion cladding of steel. Moscow: Mashinostroenie.
16. Ryabtsev, I.A. (1981) Bimetallic rolled metal with clad layer of granular powder PG-S1. In: Abstr. of 3rd Republ. Sci.-Techn. Conf. on Current Methods of Surfacing and Consumables (Kharkov, 1981), 9-10.
17. Kalner, V.D., Goryushina, M.N., Sichuzhnikova, A.A. (1984) Processes of interaction in interface of bimetallic billets produced by method of nonsintered powder rolling. Metallovedenie i Termich. Obrab. Metallov, 3, 28-29.
18. Fedorov, B.N., Osadchy, V.A., Tits, M.Yu. et al. (1975) Prospects of application of compact materials in bimetallic parts of agricultural machine tools. Traktory i Selkhozmashiny, 9, 39-41.
19. Ryabtsev, I.A. (2004) Surfacing of machine and mechanism parts. Kiev: Ekotekhnologiya.
20. Pereplyotchikov, E.F., Ryabtsev, I.A., Gordan, G.M. (2003) High-vanadium alloys for plasma-powder cladding of tools. The Paton Welding J., 3, 14-17.
21. Pereplyotchikov, E.F. (2005) Plasma cladding. Remont, Vosstanovlenie, Modernizatsiya, 12, 35-40.
22. Denisenko, M., Opalchuk, A. (2011) Wear and increase in service life of agricultural machine tools. Pt2. Visnyk Ternopil. NTU, 2, 201-210.
23. Kobets, A.S., Kobets, O.M., Pugach, A.M. (2011) Field investigations of wear of hoes with local strengthening. Visnyk Khark. NTU im. P.Vasylenka. Series Mechanization of agricultural production, 107, 208-213.
24. Mikhalchenkov, A.M., Tyureva, A.A., Mikhalchenkova, M.A. (2007) Increase in wear resistance of plough shares by deposition of strengthening beads in zone of maximum wear. Remont, Vosstanovlenie, Modernizatsiya, 9, 17-19.
25. Vasilenko, M.O. (2008) Prospects of local strengthening application in manufacturing and repair of tools. Tekhnika APK, 1, 29-31.
26. Kirgizov, V.E., Shishkin, G.M., Baldanov, K.P. et al. (2010) Increase in service life of plough shares in repair by carbon electrode surfacing. Vestnik IrGSKhA, Issue 38, 65-70.
27. Goncharenko, V.V., Ferbyakov, A.V., Kuznetsov, Yu.A. et al. (2006) Repair and strengthening of share cutting edge by brazing of cermet plates. Mekhanizatsiya i Elektrifikatsiya Selsk. Khoz., 11, 21-22.
28. Fominsky, L.P., Levchuk, M.V., Bajsman, A.F. et al. (1987) Surfacing of agricultural machine tools using electron accelerator. Svarochn. Proizvodstvo, 11, 4-6.
29. Ivashko, V.S., Yaroshevich, V.K., Luzan, P.G. et al. (2006) Strengthening of rapidly-wearing parts of tillage machines. Mizhvidom. Nauk.-Tekhn. Zbirnyk Kirovograd. NTU. Series Design, manufacturing and service of agricultural machines, Issue 39.
30. Kovalenko, V.S., Merkulov, G.V., Strizhak, A.I. (1981) Laser beam strengthening of parts. Kiev: Tekhnika.
31. Solovykh, E.K., Aulin, V.V., Bobrytsky, V.M. (2005) Analysis of wear pattern of tillage part edges and increase in their resource using laser technologies. Design, manufacturing and service of agricultural machines, Issue 35, 153-159.
32. Pulka, Ch.V. (2006) Technological and power efficiency of induction melting of thin steel discs: Syn. of Thesis for Dr. of Techn. Sci. Degree. Kiev.
33. Shably, O.M., Pulka, Ch.V., Korol, O.I. (2008) Main directions in induction surfacing of agricultural machine tools. Visnyk Ternopil DTU, 13(4), 100-109.
34. Shably, O.M., Pulka, Ch.V., Senchishin, V.S. et al. (2011) Development of energy-saving heating system for induction surfacing of agricultural machine parts. Ibid., 4, 107-120.
35. Bilovod, O.I., Dudnikov, A.A. (2007) To problem of wear resistance of tools of beet harvesters. Visnyk Khark. DTU im. P. Vasylenka. Series Mechanization of agriculture, Issue 59 (1), 288-293.
36. Dudnikov, I.A., Kivshik, A.P., Dudnikov, A.A. (2009) To problem of influence of vibration treatment on material deformation of treated parts: Transact. Issue 39, 167-169.
37. Dudnik, V.V. (2011) Evaluation of structure of strengthened layer of pough edge. Vostochno-Evrop. Zhurnal Pered. Tekhnology, 4/7, 4-6.
38. Dudnikov, A.A., Gorbenko, O.V., Bilovod, O.I. (2006) Strengthening treatment with vibrating deformation. In: Transact. of Lugansk NAU, 68/91, 86-88.
39. Babichev, A.P., Babichev, I.A. (2008) Principles of vibration technology. Rostov-na-Donu.
40. Sutyrin, G.V. (1975) Study of mechanism of low-frequency vibration impact on weld pool crystallization. Avtomatich. Svarka, 5, 7-10.
41. Khafizova, O.F., Bolobov, V.I., Fajrushin, A.M. et al. (2011) To influence of vibration treatment on mechanical properties of dissimilar welded joints. Neftegazovoe Delo, 1; http://www.ogbus.ru/ authors/Khafizova/Khafizova_1pdf/
42. Salmin, A.N., Fajrushin, A.M., Ibragimov, I.G. (2010) Study of influence of vibratons during welding on operational strength and mechanical properties of 11Kh11N2V2MF steel welded joints. Ibid.; http: //www.ogbus.ru/authors/Salmin/Salmin_1.pdf
43. Pulka, Ch.V., Shably, O.N., Senchishin, V.S. et al. (2012) Influence of vibration of parts on structure and properties of metal in surfacing. The Paton Welding J., 1, 23-25.
44. Pulka, Ch.V., Senchishin, V.S. Device for surfacing of thin shaped discs. Pat. 59994 UA. Int. Cl. V23K 13/00. Fil. 05.11.2010. Publ. 10.06.2011.
45. Pulka, Ch.V., Senchishin, V.S. Method of surfacing of steel parts. Pat. 64371 UA. Int. Cl. V23K 13/00. Fil. 18.03.2011. Publ. 10.11.2011.
46. Shably, O.N., Pulka, Ch.V., Senchishin, V.S. et al. Method of surfacing of flat steel parts. Pat. 54204 UA. Int. Cl. V23K 13/00. Fil. 28.05.2010. Publ. 25.10.2010.

---

Suggested Citation

V.S. Senchishin and Ch.V. Pulka (2012) TRANSISTOR POWER SOURCES FOR ELECTRIC ARC WELDING (Review). The Paton Welding J., 09, 43-49.

---