The Paton Welding Journal, 2023, №02



2023 №02 (03)

DOI of Article 10.37434/tpwj2023.02.04

2023 №02 (05)

---

The Paton Welding Journal, 2023, #2, 22-33 pages

Detonation coatings based on TiAl intermetallics with additions of non-metallic refractory compounds

A.L. Borysova, A.I. Kildii, T.V. Tsymbalista, M.A. Vasylkivska

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: tstania@ukr.net

Abstract
The results of producing and examination of structure and phase composition of detonation coatings from composite powders (CP) based on TiAl intermetallics and non-metallic refractory compounds (B4C, BN, SiC, Si3N4) are presented. Detonation spraying with CP was carried out using the automatic detonation complex “Perun-S”. As working gases, the mixture “propane- butane-oxygen” and as diluent and transporting gas air were used. CP for detonation spraying was produced by the method of mechanochemical synthesis (MChS) with a subsequent conglomeration. The size of CP particles was 40…80 μm. It was revealed that the main changes in the phase composition of detonation coatings as compared to the original CP consist in the appearance of a large number of oxide phases; in the composition TiAl–B4C – TiO2, Ti3O5; TiAl–BN – Ti3O5, TiO, TiO2; TiAl– SiC–TiO2, Ti3O5, SiO2; TiAl–Si3N4–TiO2, TiO, SiO2. The most dense and homogeneous structure was obtained in the coatings with CP TiAl–SiC і TiAl–Si3N4. 17 Ref., 2 Tabl., 16 Fig.
Keywords: Ti-Al intermetallics, non-metallic refractory compounds, detonation coatings

Received: 09.01.2023
Accepted: 30.03.2023

References

1. Gotman I., Koczak, M.J. (1994) Fabrication of A1 matrix in situ composites via self-propagating synthesis. Materials and science and engineering, 187, 189-199. https://doi.org/10.1016/0921-5093(94)90347-6
2. Han, Ch., Babicheva, R., Chu, J. et al. (2020) Microstructure and mechanical properties of (TiB+TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101466
3. Pfeiler, M., Zechner, J., Penoy, M. et al. (2009) Improved oxidation resistance of TiAlN coatings by doping with Si or B. Surface and Coatings Technology, 203, 3104-3110. https://doi.org/10.1016/j.surfcoat.2009.03.036
4. Wu, H., Cui, X.P., Geng. L. et al. (2013) Fabrication and characterization of in-situ TiAl matrix composite with controlled microlaminated architecture based on SiC/Al and Ti system. Intermetallics, 43, 8-15. https://doi.org/10.1016/j.intermet.2013.07.004
5. Gan, J.A., Berndt, Ch.C. (2015) Thermal spray forming of titanium and its alloys. Titanium Powder Metallurgy, 425-446. https://doi.org/10.1016/B978-0-12-800054-0.00023-X
6. Cinca, N., Guilemany, J.M. (2012) Thermal spraying of transition metal aluminides: An overview. Intermetallics, 24, 60-72. https://doi.org/10.1016/j.intermet.2012.01.020
7. Goral, M., Swadzba, L., Moskal G. et al. (2011) Diffusion aluminide coatings for TiAl intermetallic turbine blades. Intermetallics, 19, 744-747. https://doi.org/10.1016/j.intermet.2010.12.015
8. Venkataraman, R., Ravikumar. B., Krishnamurthy. R., Das, D.K. (2006) A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates. Surface and Coatings Technology, 201, 3087-3095. https://doi.org/10.1016/j.surfcoat.2006.06.037
9. Semenov, S., Cetegen, B. (2002) Experiments and modeling of the deposition of nanosttructured alumina-titania coatings by detonation waves, Materials Science And Engineering A, 335(1-2), 67-81. https://doi.org/10.1016/S0921-5093(01)01948-7
10. Cetegen, B., Semenov, S., Goberman, D. (2003) Deposition of multi-layered alumina-titania coatings by detonation waves. Scripta Materialia, 48, 1483-1488. https://doi.org/10.1016/S1359-6462(03)00076-9
11. Oliker, V.E., Syrovatka, V.L., Timofeeva, I.I. et al. (2005) Influence of properties of titanium aluminide powders and conditions of detonation spraying on phase- and structure formation of coatings. Poroshk. Metallurgiya, 9-10, 74-84 [in Russian]. https://doi.org/10.1007/s11106-006-0012-2
12. Oliker,V., Sirovatka. V., Timofeeva I. et al. (2006) Formation of detonation coatings based on titanium aluminide alloys and aluminium titanate ceramic sprayed from mechanically alloyed powders TiAl. Surface and Coatings Technology, 200, 3573-3581 https://doi.org/10.1016/j.surfcoat.2005.02.139
13. Ti-Al-B. Порошковая металлургия, 11-12, 12-20. Oliker,V., Sirovatka. V., Gridasova, T.Ya. et al. (2009) Influence of gas environment on evolution of structure and phase composition during spraying process of detonation coatings of mechanochemically synthesized Ti-Al-B powders. Poroshk. Metallurgiya, 11-12, 12-20 [in Russian].
14. Dudina, D., Korchagin, M., Zlobin S. et al. (2012) Compositional variations in the coatings formed by detonation spraying of Ti3Al at different O2/C2H2 ratios. Intermetallics, 140-146. https://doi.org/10.1016/j.intermet.2012.05.010
15. Oliker, V., Kresanov, V. (2000) Structure and properties of detonation coatings based on γ-TiAl. Powder Metallurgy and Metal Ceramics, 39, 590-593. https://doi.org/10.1023/A:1011380231244
16. Bratanich, T.I., Skorokhod, V.V., Kopylova, L.I. et al. (2010) Destructive hydrogenation and recombination of α2-Ti3Al alloy as a way to produce solid nanocomposites and coatings with improved properties. Pt. 2. Recombination of Ti3Al and producing of detonation coatings. Poroshk. Metallurgiya, 9-10, 132-141 [in Ukrainian]. https://doi.org/10.1007/s11106-010-9263-z
17. Borysov, Yu.S., Borysova, A.L., Burlachenko, O.M. et al. (2021) Composite powders based on FeMoNiCrB amorphizing alloy with additives of refractory compounds for thermal spraying of coatings. The Paton Welding J., 11, 44-52. https://doi.org/10.37434/tpwj2021.11.07

---

Suggested Citation

A.L. Borysova, A.I. Kildii, T.V. Tsymbalista, M.A. Vasylkivska (2023) Detonation coatings based on TiAl intermetallics with additions of non-metallic refractory compounds. The Paton Welding J., 02, 22-33.

---