The Paton Welding Journal, 2023, №09



2023 №09 (07)

DOI of Article 10.37434/tpwj2023.09.08

2023 №09 (01)

---

The Paton Welding Journal, 2023, #9, 47-52 pages

Properties of coatings, deposited by multichamber detonation device and their application

O.V. Kolisnichenko, Yu.M. Tyurin

E.O. Paton Electric Welding Institute of the NASU.. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: okolis@i.ua

Abstract
Coatings from WC–Co–Cr AMPERIT®554.074 powder were deposited using a multichamber detonation device. Investigations of coating microstructure and phase composition were conducted, using scanning electron microscopy and X-ray structural analysis. Dense coatings form at spraying by this method which consist of inclusions of tungsten carbide phases, uniformly distributed in Co–Cr matrix. Coating porosity is equal to ~0.2 %, microhardness is – 10.4 ± 1.2 GPa. Experience of application of multichamber detonation device for deposition of wear-resistant coatings from WC–Co–Cr powder is shown, both at the stage of part reconditioning and at design of components of various mechanisms. 12 Ref., 2 Tabl., 9 Fig.
Keywords: thermal spraying, detonation device, hard alloy, coating, microstructure, wear, porosity, hardness, industrial application

Received: 18.07.2023
Accepted: 09.10.2023

References

1. Ang, A.S.M., Howse, H., Wade, S.A. et. al. (2016) Development of processing windows for HVOF carbide-based coatings. J. of Thermal Spray Technology, 25, 28-35. https://doi.org/10.1007/s11666-015-0318-z
2. Berger, L.M. (2015) Application of hardmetals as thermal spray coatings. Int. J. of Refractory Metals and Hard Materials, 49, 350-364. https://doi.org/10.1016/j.ijrmhm.2014.09.029
3. Sun, B., Fukanuma, H., Ohno, N. (2013) Investigation and Characterization of HVAF WC-Co-Cr Coatings and Comparison to Galvanic Hard Chrome Coatings. Proceedings of the Int. Thermal Spray Conference 2013, May 13-15, 2013, Busan, Republic of Korea, 389-394.
4. Borisov, Yu.S., Astakhov, E.A., Murashov, A.P. et al. (2015) Investigation of structure and properties of thermal coatings of WC-Co-Cr system produced by high-velocity methods of spraying. The Paton Welding J., 10, 25-28 https://doi.org/10.15407/tpwj2015.10.04
5. Singh, L., Chawla, V., Grewal, J.S. (2012) A review on detonation gun sprayed coatings. J. of Minerals and Materials Characterization and Engineering, 11(03), 243. https://doi.org/10.4236/jmmce.2012.113019
6. Picas, J.A., Punset, M., Baile, M.T. et. al. (2009) Properties of WC-Co-Cr Based Coatings Deposited by Different HVOF Thermal Spray Processes. Plasma Processes and Polymers, 6, 948-953. https://doi.org/10.1002/ppap.200932402
7. Torkashvand, K., Gupta, M., Björklund, S. et. al. (2021) Influence of nozzle configuration and particle size on characteristics and sliding wear behavior of HVAF-sprayed WC-Co-Cr coatings. Surface and Coatings Technology, 423, 127585. https://doi.org/10.1016/j.surfcoat.2021.127585
8. Granata, M., Gautier di Confiengo, G., Bellucci, F. (2022) High-Pressure Cold Spray Coatings for Aircraft Brakes Application. Metals, 12(10), 1558. https://doi.org/10.3390/met12101558
9. Bamola, R., Ewell, T., Robinson, P. et. al. (2016) Coatings Deposited Using a Valve-Less Detonation System. Proceedings of the Int. Thermal Spray Conference 2016, May 10- 12, 2016, Shanghai, P.R. China, 127-131. DOI: https://doi. org/10.31399/asm.cp.itsc2016p0127
10. Tyurin, Yu.M., Kolisnichenko, O.V. (2008) Method of detonation spraying of coatings and device for its realization. Pat. 8383, Ukraine.
11. Kolisnichenko, O.V., Tyurin, Yu.N., Tovbin, R. (2017) Efficiency of process of coating spraying using multichamber detonation unit. The Paton Welding J., 10, 18-23. https://doi.org/10.15407/as2017.10.03
12. Garfias Bulnes, A., Albaladejo Fuentes, V., Garcia Cano, I. et. al. (2020) Understanding the influence of high velocity thermal spray techniques on the properties of different antiwear WC-based coatings. Coatings, 10 (12), 1157. https://doi.org/10.3390/coatings10121157

---

Suggested Citation

O.V. Kolisnichenko, Yu.M. Tyurin (2023) Properties of coatings, deposited by multichamber detonation device and their application. The Paton Welding J., 09, 47-52.

---