| 2017 №08 |
DOI of Issue https://doi.org/10.15407/as2017.09 |
2017 №10 |
CONTENTS
SCIENTIFIC AND TECHNICAL
- Degtyarev V. A. Influence of the ratio of dynamic and static stresses on brittle fracture resistance of low-alloyed steel welded joints ... 3 https://doi.org/10.15407/as2017.09.01
- Shelyagin V. D., Bernatskii A. V., Khaskin V. Yu., Shuba I. V., Siora A. V. Investigation of physical features and technological capabilities of continuous optical discharge ... 10 https://doi.org/10.15407/as2017.09.02
- Efremenko B. V., Belik A. G., Cheilyakh Ya. A., M. Bakh-rami Alamdarlo. Investigation of formation of structure of wear-resistant alloy in surfacing using powder strip PL-AN-111 ... 17 https://doi.org/10.15407/as2017.09.03
- Grigorenko G. M., Adeeva L. I., Tunik A. Yu., Korzhik V. I., Kapitanchuk L. M. Features of the structure of plasma-arc coatings produced at application of fluxcored wires with a steel sheath and filler from B4C and ZrO2 nanopowder ... 23 https://doi.org/10.15407/as2017.09.04
- Markashova L. I., Tyurin Yu. N., Kolisnichenko O. V., Berdnikova E. N., Kushnareva O. S., Polovetskii E. V., Titkov E. P. Effect of structure on properties of Al2O3 and Al (or Ti) mechanical mixture coatings produced by multichamber detonation spraying method ... 33 https://doi.org/10.15407/as2017.09.05
- Borisov Yu. S., Borisova A. L., Burlachenko A. N., Tsymbalistaya T. V., Senderowski C. Structure and properties of alloyed powders based on Fe3Al intermetallic for thermal spraying produced using mechanochemical synthesis method ... 40 https://doi.org/10.15407/as2017.09.06
INDUSTRIAL
- Zhemanyuk P. D., Petrik I. A., Chigileychik S. L. Results of implementation of orbital welding in manufacture and repair of thin-wall pipelines ...48 https://doi.org/10.15407/as2017.09.07
- Ryabtsev I. A., Rozert R., Turyk E., Riabtsev I. I. Classification and characteristic of defects of deposited layers according to the international standard ISO 6520-1:2007 ... 52 https://doi.org/10.15407/as2017.09.08
- Moltasov A. V. Approximate calculation of radius of weld transition to the base metal of weld ed joint according to the standardized parameters ... 59 https://doi.org/10.15407/as2017.09.09
- Kyrychok V. V., Torop V. M. Engineering approach to determination of stress intensity factor and parameters of growth of axial crack in circumferential weld of pipeline ... 63 https://doi.org/10.15407/as2017.09.10
Information
- World-level high-tech technologies from RFA Robotics ... 67 Company Fronius at the largest International Fair on
- Welding and Cutting «Schweissen & Schneiden 2017» — welding in the digital world ... 70