Eng
Ukr
Rus
Print
2016 №03 (07) DOI of Article
10.15407/as2016.03.08
2016 №03 (01)

Automatic Welding 2016 #03
Avtomaticheskaya Svarka (Automatic Welding), #3, 2016, pp. 57-61
 
Development of adhesion and adhesion-welding technology for repair of bearing seats for extension of service life of casing parts of power equipment

 
 
Authors
Yu.S. Vasilev, N.I. Olejnik And L.S. Parshutina
E.O. Paton Electric Welding Institute, NASU. 11 Kazimir Malevich Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
Abstract
The analysis of physical and mechanical factors determining the service life of bearing units was carried out. The adhesion and adhesion-welding technologies for restoration of bearing seats in the supports of heavily loaded gears were developed. The compositions of repair composite material based on adhesive «Koutex» and the optimal modes of stage-by-stage deposition of coupling, filling and finishing coating layers were selected. The limit values of rheological characteristics of the adhesive compositions for formation of adhesion-welding repair joint were established. 4 Ref., 7 Figures.
 
Keywords: repair technology, bearing unit, adhesion-welding technology, repair adhesive compositions, reducer
 
Received:                22.12.15
Published:               28.04.16
 
 
References
 
  1. Gryaznov, B.A., Bukhtiyarov, V.K., Kakuevitsky, V.A. et al. (2013) Application and strength of polymer materials in manufacturing and repair of machines and equipment. Kiev: IPЗ.
  2. Perel, L.Ya. (1983) Rolling bearings: Calculation, design and maintenance of supports: Refer. book. Moscow: Mashinost
  3. Goncharov, A.B., Tulinov, A.B., Odintsov, L.G. Method of diameter size reconstruction of drying cylinder of papermaking equipment. Pat. 2364487 UA. Publ. 20.08.2009.
  4. Tulinov, A.B., Goncharov, A.B. (2003) New composite materials in repair production. Vosstanovlenie. Moderniz., 11, 46–49.

>