Automatic Welding, 2023, №08



2023 №08 (05)

DOI of Article 10.37434/as2023.08.06

2023 №08 (07)

---

Avtomaticheskaya Svarka (Automatic Welding), #8, 2023, pp. 40-46

Manufacturing honeycomb panels on the base of high-entropy CoCrFeNiSi0.2 alloy foil produced by EB-PVD method

A.I. Ustinov, Iu.V. Falchenko, S.O. Demchenkov, L.V. Petrushynets

E.O. Paton Electric Welding Institute of the NAS of Ukraine. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

The possibility of manufacturing thin foils of high-entropy alloys (HEA) of Co‒Cr‒Fe‒Ni‒Si system by the method of highspeed (up to 10 μm/min) electron beam physical-vapour deposition (EB-PVD) is shown in the work. It was established that silicon content in the alloy composition of approximately 5 wt.% improves the values of high-temperature resistance of basic CoCrFeNi HEA. It is shown that at soaking in air for 28 h at the temperature of 1000 °C the specific change in the weight of CoCrFeNiSi0.2 sample is not more than 0.9 mg/cm2. A technological scheme was proposed of manufacturing by welding threelayer thermal protection honeycomb panels with a low specific weight based on thin foils of high-entropy CoCrFeNiSi0.2 alloy. It was found that the produced by the proposed scheme three-layer thermal protection panels can stand multiple thermal cycling from 25 to 1000 °C in air without the structure failure. The derived results can be the base for development of the technology of manufacturing lightweight honeycomb structures, capable of ensuring thermal protection of aerospace equipment elements at their interaction with the atmosphere. 14 Ref., 2 Tabl., 9 Fig.
Keywords: high-temperature resistance; high-entropy alloys; thin foils; electron beam deposition; three-layer honeycomb panels; thermal protection


Received: 22.06.2023

References

1. Takayuki, К., Hideyuki, Т., Syunsuke, І. et. al. (2011) Conceptual Study on Heat Resistant and Cooling System of Hypersonic Airplanes. 17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, San Francisco, CA, USA, April 11-14, 2011, 1-12. https://doi.org/10.2514/6.2011-2378
2. Rakesh, K.K., Hazem, E.S., Summit, V. et al. (2008) Static Analysis of Sandwich Panels with Square Honeycomb Core. AIAA J., 46, 627-634. https://doi.org/10.2514/1.28121
3. Boudjemai, A., Amri, R., Mankour, A. et. al. (2012) Modal Analysis and Testing of Hexagonal Honeycomb Plates Used for Satellite Structural Design. Materials and Design, 35, 266-275. https://doi.org/10.1016/j.matdes.2011.09.012
4. Semiatin, S.L., Gross, M.E., Matson, D.W. et. al. (2012) Microstructure Evolution and Composition Control During the Processing of Thin-Gage Metallic Foi. Metallurgical and Materials Transactions A, 43, 4819-4834. https://doi.org/10.1007/s11661-012-1255-9
5. Murty, B.S., Yeh, J.W., Ranganathan, S. (2014) Chapter 2 - High-Entropy Alloys: Basic Concepts, in Murty B.S., Yeh J.W., Ranganathan S. (ed.) High Entropy Alloys, Butterworth-Heinemann, Oxford, UK, 13-35 https://doi.org/10.1016/B978-0-12-800251-3.00002-X
6. Ustinov, A.I., Polishchuk. S.S., Demchenkov, S.A. et. al. (2020) Skorodzievskii, Formation of thin foils of highentropy CrFeCoNiCu alloys by EB-PVD process. Surface and Coatings Technology, 403, 126440. https://doi.org/10.1016/j.surfcoat.2020.126440
7. Ustinov, A.I., Skorodzievskii, V.S., Demchenkov, S.O. et al. (2020) Effect of the structure of vacuum condensates of high entropy alloys of Cr-Fe-Co-Ni-Cu system on their mechanical properties. Suchasna Elektrometal., 4, 16-22. https://doi.org/10.37434/sem2020.04.03
8. Ustinov, A.I., Demchenkov, S.A., Melnychenko, T.V. et. al. (2021) Effect of structure of high entropy CrFeCoNiCu alloys produced by EB PVD on their strength and dissipative properties. J. of Alloys and Compounds, 887, 161408. https://doi.org/10.1016/j.jallcom.2021.161408
9. Ustinov, A.I., Demchenkov. S.O., Melnichenko, T.V. et. al. (2022) The influence of copper on the heat resistance of thin foils of high-entropy alloys of the Cr-Fe-Co-Ni-Cu system obtained by the electron beam deposition method. The Paton Welding J., 11, 39-44. https://doi.org/10.37434/tpwj2022.11.07
10. Gusarova, I.A., Parko, M., Potapov, A.M. et al. (2016) Evaluation of high-temperature resistance of three-layer honeycomb panel produced from YuIPM-1200 alloy by vacuum diffusion welding. The Paton Welding J., 12, 29-33. https://doi.org/10.15407/tpwj2016.12.05
11. Kai, W., Cheng. F.P., Liao, C.Y. et. al. (2018) The oxidation behavior of the quinary FeCoNiCrSix high-entropy alloys. Materials Chemistry and Physics, 210, 362-369. https://doi.org/10.1016/j.matchemphys.2017.06.017
12. Li, Y., Zhang, P., Zhang, J. et. al. (2021) Oxidation behavior of AlCoCrFeNiSix high-entropy alloys at 1100 ºС. Corrosion Science, 190, 109633. https://doi.org/10.1016/j.corsci.2021.109633
13. Kobelev, V.N., Kovarsky, L.M., Timofeev, S.I. (1984) Calculation of three-layer structures. Moscow, Mashinostroenie [in Russian].
14. Bitzer, T.N. (1997) Honeycomb Technology. Materials, Design, Manufacturing, Applications And Testing. New York, Chapman & Hall.

---

Advertising in this issue:

---