The Paton Welding Journal, 2002, №02

2002 №02 (08)

2002 №02 (10)

---

The Paton Welding Journal, 2002, #2, 44-48 pages

Deposition of oxide coatings on surfaces of products of aluminium-based alloys

Yu.N. Tyurin¹, M.L. Zhadkevich¹, S.I. Golovenko¹, N.M. Chigrinova²

¹E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.
²NIIPM with PP, Minsk, Belarus

Abstract
The theory of conductivity of the electrolyte in a microdischarge process of oxidising of the working surfaces of products from the aluminium-based alloys is considered. Technology and technological fixture for the formation of a porous oxide coating on the surface of piston combustion chamber and a compact coating of up to 150 mm thickness and hardness up to 8 GPa on the inner surface of the cylinder are developed. The technology makes it possible to form the composite coatings with introducing dispersed ceramic particles. The offered technological fixture provides the coating formation on the working surfaces of the products manufactured from the metals used for valves.
Keywords: microarc oxidising, oxide coatings, aluminium-based alloys, technology, equipment

References

1. Chernenko, V.I., Snezhko, L.A., Papanova, 1.1. (1991) Producing coatings by anode-spark electrolysis. Leningrad: Khimiya.
2. Chernenko, V.I., Snezhko, L.A., Papanova, 1.1, et al. (1995) Theory and technology of anode processes at high stresses. Kyiv: Naukova Dumka.
3. Gordienko, P.S. (1996) Formation of coatings on anode-polarized electrodes in aqueous electrolytes at arcing and disruption potentials. Vladivostok: Dalnauka.
4. Atroshchenko, E.S., Kazantsev, LA., Rozen, A.E. (1996) Technology of producing coatings by microarc oxidising. Nov. Promyshl. Tekhnologii, 1, 28-33.
5. Markov, G.A., Slonova, A.I., Terleeva, O.P. (1997) Chemical composition, structure and morphology of microplasma coatings. Zashchita Metallov, 3, 289-294.
6. Timoshenko, A.V., Magurova, Yu.V., Artyomova, S.Yu. (1996) Influence of additives to electrolyte for oxidising of complex compounds on process of deposition of microplasma coatings and their properties. Fizika i Khimiya Obrab. Ma- terialov, 2, 57-64.
7. Gorchakov, A.I., Karpoukhov, A.N., Oshepkov, D.A. (1997) Development of power electric circuit for microarc oxidising unit. In: Problems of modern materials and technologies. Perm.
8. Atroshchenko, E.S., Kazantsev, I.A., Rozen, A.E. et al. (1996) Applications of coatings produced by microarc oxidising. Fizika i Khimiya Obrab. Materialov, 3, 8-11.
9. Korkosh, S.V. (1998) Experience of microarc oxidising of products from titanium and aluminium alloys. Voprosy Ma- terialoved., 1, 40-42.
10. Yerokhin, A.L., Nie, X., Leyland, A. et al. (1999) Plasma electrolysis for surface engineering. Surface and Coating Technology, 122, 73-93.
11. Ostroumov, G.A. (1979) Interaction between electric and hydrodynamic fields. Moscow: Nauka.
12. Plank, M. (1980) Uber die Erzeugung von Elektrzitat und Warme in Elektrolyten. Ann. Phys. Chem., 39, 161-186.
13. Raizer, Yu.P. (1987) Physics of gas discharge. Moscow: Nauka.

---

Suggested Citation

Yu.N. Tyurin, M.L. Zhadkevich, S.I. Golovenko, N.M. Chigrinova (2002) Deposition of oxide coatings on surfaces of products of aluminium-based alloys. The Paton Welding J., 02, 44-48.

---