The Paton Welding Journal, 2004, №04

2004 №04 (01)

2004 №04 (03)

---

The Paton Welding Journal, 2004, #4, 8-11 pages

Distribution of temperature in HAZ in explosion welding of dissimilar metals

A.P. Peev, S.V. Kuzmin, V.I. Lysak

Volgograd State Technical University, Volgograd, Russia

Abstract
Design-experimental procedure of evaluation of thermal situation in HAZ of explosion-welded dissimilar metals, differing greatly in their physical-chemical properties, are presented. It is shown that the occurrence of molten metal regions at the interface of composite layers is due to the heat generated as a result of a plastic deformation in the stronger metal
Keywords: explosion welding, similar and dissimilar me¬tals, heat-affected zone, shear, plastic deformation, distribution of temperature

References

1. Sedykh, V.S., Sonnov, A.P. (1970) Calculation of energy balance of explosion welding process. Fizika i Khimiya Obrab. Materialov, 2, 6-13.
2. Lysak, V.I., Sedykh, V.S. (1986) Influence of explosion welding parameters on kind of energy distribution in collision plates. In: Transact, on Explosion Welding and Properties of Welded Joints. Volgograd: VPI.
3. Kobelev, A.G., Lysak, V.I., Chernyshov, V.N. et al. (2002) Manufacturing of laminated composite materials. Minsk: Intermet Engineering.
4. Zakharenko, I.D. (1990) Explosion welding of metals. Minsk: Navuka i Tekhnika.
5. Kudinov, V.M., Koroteev, M.Ya. (1978) Explosion welding in metallurgy. Ed. by E.S. Karakozov. Moscow: Metallurgiya.
6. Khripunov, V.M., Pokataev, E.P. (2000) Calculation of thermal processes in explosion welding of dissimilar metals. In: Transact, on Explosion Welding and Properties of Welded Joints. Volgograd: VPI.
7. Berdychenko, A.A. (2000) On temperature distribution in near-weld zone during explosion welding. Ibid.
8. Pokataev, E.P., Khripunov, V.M., Pokataeva, V.M. (1998) Analytical investigation of thermal processes in explosion welded flat elements. Ibid.
9. Smelyansky, V.Ya., Ryskulov, M.T., Kozhevnikov, V.E. (1986) About problem of calculation of explosion welding conditions of dissimilar materials. Ibid.
10. Peev, A.P., Kuzmin, S.V., Lysak, V.I. et al. (2003) Features of plastic deformation of near-weld zone metal in ex¬plosion welding of copper with aluminium. Fizika i Khimiya Obrab. Materialov, 3, 71-76.
11. Kuzmin, S.V., Lysak, V.I., Chugunov, E.A. et al. (2000) Welded joint formation in explosion welding of metals. The Paton Welding J., 11, 26-30.
12. Kuzmin, S.V., Lysak, V.I., Chugunov, E.A. et al. (2000) New procedure of investigation of near-weld zone metal produced by explosion welding. Fizika i Khimiya Obrab. Materialov, 2, 54-60.

---

Suggested Citation

A.P. Peev, S.V. Kuzmin, V.I. Lysak (2004) Distribution of temperature in HAZ in explosion welding of dissimilar metals. The Paton Welding J., 04, 8-11.

---