The Paton Welding Journal, 2004, №06

2004 №06 (11)

2004 №06 (13)

---

The Paton Welding Journal, 2004, #6, 51-52 pages

Evaluation of steepness of the arc static characteristic by the results of indirect measurements

G.A. Tsybulkin

E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
A method is suggested for assessment of steepness of the static characteristic of an electric arc in consumable electrode welding, which is based on using the results of indirect measurements of some parameters in the welding circuit
Keywords: arc welding, consumable electrode, static characteristic of the arc, stability

References

1. Tsybulkin, G.A. (2002) To the question of GMAW stability. The Paton Welding J., 5, 14-16.
2. Tsybulkin, G.A. (1998) On compensation of the influence of welding parameter instability on evaluation of electrode deviation from the joint line of welded parts. Avtomatich. Svarka, 4, 50-52.
3. Paton, B.E. (1952) Self-regulation of the arc in consumable electrode welding Ibid., 1 38-45.
4. Tsybulkin, G.A. (2003) On the influence of the speed of variation of electrode extension and arc length on arc sensor signal. The Paton Welding J., 6, 21-24.
5. Lenivkin, V.A., Dyurgerov, N.G., Sagirov, Kh.N. (1989) Technological properties of the welding arc in shielding gases. Moscow: Mashinostroenie.
6. Kanningham, V. (1962) Introduction into the theory of non-linear systems. Moscow-Leningrad: Gosenergoizdat.

---

Suggested Citation

G.A. Tsybulkin (2004) Evaluation of steepness of the arc static characteristic by the results of indirect measurements. The Paton Welding J., 06, 51-52.

---