The Paton Welding Journal, 2005, №09

2005 №09 (04)

2005 №09 (06)

---

The Paton Welding Journal, 2005, #9, 23-28 pages

Producing a flame-sprayed coating using hydrogen-oxygen flame

V.N. Korzh, Yu.S. Popil

National Technical University of Ukraine «Kiev Polytechnic Institute», Kiev, Ukraine

Abstract
Influence of the combustible mixture composition and nature of its flow on the energy state of a spraying particle is considered. Conditions are established of producing flame-sprayed coatings of materials with different melting temperatures, using hydrogen-oxygen flame, generated when burning a mixture produced by water-electrolysis generators.
Keywords: hydrogen-oxygen flame, water-electrolysis generator, laminar flow, turbulent flow, particle velocity, adhesion strength, coating porosity

References

1. Antsiferov, V.N., Bobrov, G.B., Druzhinin, L.K. et al. (1987) Powder metallurgy and sprayed coatings. Moscow: Metallurgiya.
2. Kharlamov, Yu.A. (1983) About role of particle velocity and temperature in thermal spraying. Fizika i Khimiya Obrab. Materialov, 3, 12–17.
3. Dorozhkin, N.N., Abramovich, T.M., Sakhnovich, V.T. (1989) Theoretical evaluation of time of powder particle beating in thermal spraying of coatings. Doklady AN BSSR.
4. (1964) Application of acetylene substitute gases in thermal spraying of metals. Ed. by I.A. Antonov. Moscow: Mashinostroenie.
5. Korzh, V.N., Popil, Yu.S. (2004) Influence of hydrocarbon additives on the structure of hydrogen-oxygen flame and temperature distribution along the plume length. The Paton Welding J., 11, 32–36.
6. Kudryavtsev, E.V. (1959) Measurement of temperature of high rate gas flux using the thermocouples. In: Gas dynamics and combustion physics. Moscow: AN SSSR.
7. Abramovich, G.N. (1976) Applied gas dynamics. Moscow: Nauka.
8. Donskoj, A.V., Klubnikin, V.S. (1979) Electric plasma processes and units in machine-building. Leningrad: Mashinostroenie.
9. Krechmar, E. (1966) Spraying of metals, ceramics and plastics. Moscow: Mashinostroenie.
10. Makarevich, S.S., Kozhuro, L.M., Mrochek, Zh.A. et al. (2001) Study of residual stresses in the coating, base and on their interface. In: Theoretical and technological principles of hardening and reconditioning of machine-building products. Minsk: Tekhnoprint.
11. (1996) Thermal coating processes. Wasteurry: Sulzer Metco.
12. Vityaz, P.A., Ivashko, V.S., Manojlo, E.D. et al. (1993) Theory and practice of thermal spraying. Minsk: Navuka i Tekhnika.

---

Suggested Citation

V.N. Korzh, Yu.S. Popil (2005) Producing a flame-sprayed coating using hydrogen-oxygen flame. The Paton Welding J., 09, 23-28.

---