The Paton Welding Journal, 2009, №11



2009 №11 (16)

2009 №11 (01)

---

TPWJ, 2009, #11, 71-76 pages  
INTEGRATED TECHNOLOGIES OF PRODUCING MULTIPURPOSE LAYERED COMPOSITE MATERIALS


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 11, 2009 (November)
Pages                      71-76
 
 
Authors
Yu.P. TRYKOV, L.M. GUREVICH and V.G. SHMORGUN
Volgograd State Technical University, Volgograd, RF
 
 
Abstract
The paper describes the experience of many years of development of integrated technologies of manufacturing a new class of structural materials (layered composites) with a unique combination of high-temperature and thermophysical properties, including explosion welding to produce bimetal and multilayer materials in combination with allied technologies (different types of heat treatment and plastic working).
 
 
Keywords: integrated technologies, explosion welding, hot initial rolling, heat treatment, layered composites
 
 
Received:                ??
Published:               28.11.09
 
 
References
1.             Trykov, Yu.P., Shmorgun, V.G. (1999) Properties and serviceability of layered composites. Volgograd: VolgGTU.
2.             Trykov, Yu.P., Shmorgun, V.G., Gurevich, L.M. (2001) Deformation of layered composites. Volgograd: VolgGTU.
3.             Trykov, Yu.P., Gurevich, L.M., Shmorgun, V.G. (2004) Layered composites on the base of aluminium and its alloys. Moscow: Metallurgizdat.
4.             Trykov, Yu.P., Gurevich, L.M., Arisova, V.N. (2006) Diffusion processes in layered composites. Volgograd: VolgGTU.
5.             Shmorgun, V.G. (2001) Evaluation of energy consumption for plastic deformation in wave generation zone during explosion welding. Svarochn. Proizvodstvo, 3, 25-27.
6.             Trykov, Yu.P., Gurevich, L.M., Gurulev, D.N. (1999) In fluence of rolling at elevated temperatures on properties of titanium-aluminium composite made by explosion welding. Ibid., 6, 6-10.
7.             Trykov, Yu.P., Shmorgun, V.G., Epishin, E.Yu. (2002) Study of the influence of hot and cold rolling on structure and properties of near-weld contact zone of titanium-steel bi metal made by explosion welding. Proizvodstvo Prokata, 8, 35-39.
8.             Trykov, Yu.P., Shmorgun, V.G., Slautin, O.V. (2003) Study of the influence of cold rolling on structure and properties of near-weld contact zone of copper-aluminium bimetal made by explosion welding. Ibid., 11, 23-27.
9.             Trykov, Yu.P., Gurevich, L.M., Gurulev, D.N. (2000) Diffusion processes in heating of titanium-aluminium composite produced by explosion welding. Svarochn. Proizvodstvo, 12, 19-21.
10.           Trykov, Yu.P., Shmorgun, V.G., Epishin, E.Yu. (2004) Diffusion processes in titanium-steel bimetal. Fizika i Khimiya Obrab. Materialov, 4, 85-89.
11.           Trykov, Yu.P., Shmorgun, V.G., Slautin, O.V. (2003) Kinetics of growth of diffusion interlayers in copper-aluminium bimetal produced by an integrated technology. Perspekt. Materialy, 3, 83-88.
12.           Trykov, Yu.P., Shmorgun, V.G., Rogozin, V.D. et al. (2003) Technology of explosion welding of magnesium-aluminium composite joints. Svarochn. Proizvodstvo, 3, 38-41.
13.           Gurevich, L.M., Trykov, Yu.P., Zhorov, A.N. et al. (2008) Structure formation in titanium-aluminium composites in presence of liquid phase. Zhurnal Funktsion. Materialov, 2(4), 153-157.
14.           Shmorgun, V.G., Trykov, Yu.P., Abramenko, S.A. et al. (2005) Mechanical properties of layered intermetallic composites of Al-Cu system at elevated temperatures. In: Izvestiya VolgGTU. Series Materials science and strength of structure elements, 12(3), 12-16.
15.           Shmorgun, V.G., Trykov, Yu.P., Slautin, O.V. et al. (2005) Layered intermetallic composites of Ti-Fe system with improved heat-resistance properties. Ibid., 16-21.
16.           Trykov, Yu.P., Shmorgun, V.G., Pronichev, D.V. (2000) Complex technologies for manufacturing composite heat-protection elements. Svarochn. Proizvodstvo, 6, 40-43.

---

Suggested Citation

Yu.P. TRYKOV, L.M. GUREVICH and V.G. SHMORGUN (2009) INTEGRATED TECHNOLOGIES OF PRODUCING MULTIPURPOSE LAYERED COMPOSITE MATERIALS. The Paton Welding J., 11, 71-76.

---