The Paton Welding Journal, 2011, №09



2011 №09 (01)

2011 №09 (03)

---

The Paton Welding Journal, 2011, #9, 10-15 pages  

DEVELOPMENT OF THE TECHNOLOGY AND EQUIPMENT FOR LASER AND LASER-ARC WELDING OF ALUMINIUM ALLOYS

G.A. TURICHIN, I.A. TSYBULSKY, E.V. ZEMLYAKOV, E.A. VALDAJTSEVA and M.V. KUZNETSOV

St.-Petersburg State Polytechnic University, St.-Petersburg, Russian Federation
 
 
Abstract
Results of computer modelling of the process of hybrid welding of Al-Mg system aluminium alloys up to 10 mm thick by using a dynamic model are considered. Examples of computation of the welding process parameters and their experimental validation are given. The developed technological laser-arc system for implementation of the hybrid welding process is described.
 
 
Keywords: laser and laser-arc welding, aluminium-magnesium alloys, process modelling, computations, geometric characteristics of the weld, thermal cycles, distribution of alloying elements, package of equipment, monitoring of the welding process
 
 
Received:                ??.??.??
Published:               28.09.11
 
 
References
1. Turichin, G. (1997) Model of laser welding for technology application. In: Proc. of the Academy of Sci., Physics Series, 61(8), 1613-1618.
2. Matsunawa, A., Mizutani, M., Katayama, S. et al. (2003) Porosity formation mechanism and its prevention in laser welding. Welding Int., 17(6), 431-437.
3. Lopota, V., Turichin, G., Tzibulsky, I. et al. (1999) Theoretical description of the dynamic phenomena in laser welding with deep penetration. In: Proc. of SPIE, Series 3688, 98-107.
4. Forsman, T., Powell, J., Magnusson, C. (2001) Process instability in laser welding of aluminium alloys at the boundary of complete penetration. J. Laser Appl., 13(10), 193-198.
5. Bashenko, V.V., Mitkevich, E.A., Lopota, V.A. (1983) Peculiarities of heat and mass transfer in welding using high energy density power sources. In: Proc. of 3rd Int. Coll. on EBW (Lion, 1983), 61-70.
6. Lopota, V.A., Smirnov, V.S. (1989) Structure of material and its parameters in beam-affected zone in laser welding with deep penetration. Fizika i Khimiya Obrab. Materialov, 2, 104-115.
7. Matsunawa, A., Kim, J.-D., Seto, N. et al. (1998) Dynamics of the keyhole and molten pool in laser welding. J. Laser Appl., 10(12), 247-254.

---

Suggested Citation

G.A. TURICHIN, I.A. TSYBULSKY, E.V. ZEMLYAKOV, E.A. VALDAJTSEVA and M.V. KUZNETSOV (2011) DEVELOPMENT OF THE TECHNOLOGY AND EQUIPMENT FOR LASER AND LASER-ARC WELDING OF ALUMINIUM ALLOYS. The Paton Welding J., 09, 10-15.

---