Eng
Ukr
Rus
Print
2015 №07 (07) DOI of Article
10.15407/tpwj2015.07.08
2015 №07 (09)

The Paton Welding Journal 2015 #07
TPWJ, 2015, #7, 47-50 pages
 
Evaluation of strength of joints produced using welding with concurrent brazing
 
Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 7, 2015 (July)
Pages                      47-50
 
 
Authors
V.I. Savulyak, S.A. Zabolotny And D.V. Bakalets
Vinnytsa National Technical University. 95 Khmelnitskoe Shosse, 231021, Vinnytsa, Ukraine. E-mail: vsavulyak@mail.ru
 
Abstract
Grounded was the rationality and the technology of producing permanent joints by combining the processes of welding and brazing using heat generated in the process of arc burning was described. The aim of the work is to establish the influence of formed brazed component on strength of the joint and structure as a whole. Developed were the methods for manufacture of pilot specimens, allowing establishing the necessary dependencies of strength of joints on type of braze material and its quantity. Namely the strength tests and processing of experimental data were performed in accordance with recommendations of GOST 28830-90. The use of programs of finite element analysis allowed determining the optimal welding conditions with concurrent brazing and the amount of braze material that can be melted. This technology can be used for repair of frames of transport machinery, damaged by cracking, by welding-on of strengthening cover plates. Also, it is rational to use the developed technology in production of frame structures. It was proved that the use of technology for producing permanent joints by combining the processes of welding and brazing using braze alloys based on copper can increase the strength of joint by one third as compared to conventional joint. 12 Ref., 3 Tables, 4 Figures.
 
Keywords: rame structure, transport, crack, technology, repair, strengthening, welding, brazing, strength
 
Received:                03.03.15
Published:               13.10.15
 
 
References
  1. Savulyak, V.I., Zabolotny, S.A., Bakalets, D.V. (2014) Combination of joining and brazing for repair of frames of transport facilities. Problemy Trybologii, 73(3), 17-21.
  2. Savulyak, V.I., Zabolotniy, S.A., Bakalets, D.V. (2013) Improvement of strengthening and repair of frame structures welding methods. J. New Technol. and Products in Machine Manufact. Technologies, 20, 189-192.
  3. Khorunov, V.F., (2008) Principles of brazing of thin structures from high-strength steels. Kiev: Naukova Dumka.
  4. Marynenko, S.Yu., Kramar, G.M. (2014) Specifics of brazing of low-tungsten hard alloys. Progres. Tekhnologii i Systemy Mashynobud., 47(1), 196-200.
  5. Bakalets, D.V., Savulyak, V.I. (2012) Increase in reliability and repair of metal structures of transport and agricultural machines. In: Transact. of VNAU. Series Tekhnichni Nauky, Issue 11(66), Vol. 2, 302-306.
  6. Petrunin, I.E., Lotsmanov, S.N., Nikolaev, G.A. (1973) Brazing of metals. Moscow: Metallurgiya.
  7. Lyapina, O.V. (2006) Physico-chemical processes on surface of copper alloy films: Syn. of Thesis for Cand. of Techn. Sci. Degree. Ivano-Frankivsk: V.Stefanyk PkNU.
  8. Kortes, A.P. (2007) Welding, cutting, brazing of metals. Moscow: Adelant.
  9. (1976) Technology of welding, brazing and inspection of cutter billets: Recommend of VNII. Ed. by K.P. Imshennik. Moscow: NIIMashprom.
  10. Ekatova, A.S. (1975) Fluxes and gas atmospheres: Refer. Book. Moscow: Mashinostroenie.
  11. (1989) Manual for design of steel structures to SNIP P-23-81 «Steel structures» of Kucherenko TsNIISK Gosstroya USSR. Moscow: TsITP Gosstroya SSSR.
  12. (1990) Strength of welded joints under alternating loads. Ed. by V.I. Trufyakov. Kiev: Naukova Dumka.

>