The Paton Welding Journal, 2017, №07



2017 №07 (09)

DOI of Article 10.15407/tpwj2017.07.01

2017 №07 (02)

---

The Paton Welding Journal, 2017, #7, 2-5 pages
 

Synthesis of structure of system for self-regulation of electrode melting rate

G.A. Tsybulkin

E.O. Paton Electric Welding Institute, NASU 11 Kazimir Malevich Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
Abstract
In automation of consumable electrode arc welding it is necessary to have a clear knowledge about the structure of system for a self-regulation of the electrode melting rate. In the given work a general structure of this system is constructed on the basis of analytical description of dynamic processes, proceeding in the welding circuit. A simple structure analysis allows easy obtaining the necessary characteristics of the self-regulation system, including accuracy in a steady mode and time of optimizing the effect of disturbances. Criteria are suggested, that allow selecting those parameters of welding processes from the admissible values, which provide the desirable quick-response of the self-regulation system. Results of comparison of quick-response estimates, obtained by using these criteria, with results of computer modeling, are given. 21 Ref., 5 Figures.
 
Keywords: robotic arc welding, consumable electrode, structure of self-regulation system, evaluation of accuracy and quick-response of system
 
 
Received:                11.05.17
Published:               01.09.17
 
 
References

1. Tsybulkin, V.N. (1978) Theory of control and biosystems. Analysis of conservation properties. Moscow: Nauka.
2. Albegov, E.V., Butenko, D.V., Butenko, L.N. (2014) Homeostatics: concept modeling of structured stable systems: Monography. Moscow: Natural Sci. Acad.
3. Paton, B.E. (1952) Self-regulation in consumable electrode welding. Svarka, 1, 38–45.
4. Lenivkin, V.A., Dyurgerov, N.G., Sagirov, Kh.N. (1989) Technological properties of welding arc in shielded gases. Moscow: Mashinostroenie.
5. Leskov, G.I. (1970) Electric welding arc. Moscow: Mashinostroenie.
6. Tsybulkin, G.A. (2014) Adaptive control in arc welding: Monography. Kiev: Stal.
7. Lebedev, A.V. (1978) Influence of heat evolution in electrode stickout on process of self-regulation. Svarka, 7, 10–15.
8. (1986) Automation of welding processes. Ed. by V.K. Lebedev. Kiev: Vyshcha Shkola.
9. Paton, B.E., Lebedev, V.K. (1966) Electric equipment for arc and slag welding. Moscow: Mashinostroenie.
10. Sudnik, V.A., Erofeev, V.A., Logvinov, R.V. (1999) Examination of stability of the consumable electrode shielded-gas arc welding. In: Computer technologies in joining of materials: Transact. Tula: TSU, 110–120.
11. Pan, J. (2003) Arc welding control. Wood head Publish. LTD and CRC LLC.
12. Makarov, I.M., Mensky, B.M. (1977) Linear automatic systems ( elements of theory, methods of calculation and reference document): Manual for inst. of higher education. Moscow: Mashinostroenie.
13. Dorf, R., Bishop, R. (2002) Modern control systems. Moscow: Laboratory of basic knowledges.
14. (1988) Theory of control. Terminology, Issue 107. Moscow: Nauka.
15. Tsybulkin, G.A. (2005) Influence of frequency properties of the welding circuit on current parameters in pulsed-arc welding processes. The Paton Welding J., 10, 9–13.
16. Voropaj, N.M., Ilyushenko, V.M., Lankin, Yu.N. (1999) Peculiarities of pulsed-arc welding with synergic control of mode parameters (Review). Svarka, 6, 26–32.
17. Paton, B.E., Shejko, P.P., Zhernosekov, A.M. et al. (2003) Stabilization of the process of consumable electrode pulse-arc welding. The Paton Welding J., 8, 2–5.
18. Saraev, Yu.N. (2002) Adaptive pulsed-arc methods of mechanized welding in construction of main pipelines. Proizvodstvo, 1, 4–11.
19. Tsybulkin, G.A. (2016) Effect of parameters of welding circuit on formation of welding current pulses. The Paton Welding J., 9, 14–17. https://doi.org/10.15407/tpwj2016.09.03
20. Lebedev, V.K., Uzilevsky, Yu.A., Savich, I.M. et al. (1980) Analysis of possibility of adjustment by self-regulation system of typical disturbances on arc length in mechanized underwater welding: Underwater welding and cutting. by A.E. Asnis. Kiev: PWI, 10–23.
21. Korinets, I.F. (1995) Mathematical model of electrode wire melting in arc welding. Svarka, 10, 39–43.

---

Suggested Citation

G.A. Tsybulkin (2017) Synthesis of structure of system for self-regulation of electrode melting rate. The Paton Welding J., 07, 2-5.

---