Print

2022 №03 (04) DOI of Article
10.37434/tpwj2022.03.05
2022 №03 (06)

The Paton Welding Journal 2022 #03
п»їThe Paton Welding Journal, 2022, #3, 41-44 pages

Experimental studies of bifilar electroslag welding with an equalizing wire

Yu.M. Lankin, O.P. Bondarenko, V.G. Tyukalov, V.G. Soloviov, I.Yu. Romanova


E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: lankin.y.n@gmail.com

Abstract
At bifilar electroslag welding, compared to the traditional two-electrode circuit, the path of current flowing in the slag pool is significantly different, and, consequently, the position of heat evolution zones and electromechanical forces acting on the molten slag and metal, changes drastically. Experiments showed that at bifilar electroslag welding penetration of the edges of welded item metal is considerably smaller, and reduction of the welding gap becomes possible that allows raising the welding speed at the same power, and power factor cos φ increases essentially from 0.67 to 0.9. Connection of equalizing wire between the midpoint of output winding of power transformer and the item being welded ensures stability of the electroslag welding process by the bifilar circuit of power source connection.
Keywords: electroslag welding, bifilar power circuit, edge penetration, process stability, power factor

Received: 10.12.2021
Accepted: 16.05.2022

References

1. Medovar, B.I., Stupak, L.M., Bojko, G.A., (1976) Electroslag furnaces. Ed. by b.E. paton. Kyiv, naukova Dumka [in Russian].
2. Jing, Xie (2008) Structure advantage of a 5-t double pole series circuit electroslag furnace. Heavy Casting and Forging, 5(3), 43–45 [in Chinese].
3. Xi-min, Zang, tian-yu, Qiu, Xin, Deng et al. (2015) industrial test of a 6-m long bearing steel ingot by electroslag remelting with drawing process. China Foundry, 12(3), 202–207.
4. Tezuka, M., Yamamoto, S., Takahashi, F. et al. (2014) Internal quality of 2150 mm-diameter ingot manufactured using new 150-ton ESR furnace. in: Proc. of the 19th Int. Forgemasters Meeting – IFM (Tokyo, Japan, 29.09–03.10), 90–94.
5. Son, I., Lee, W., Sim, Kw. et al. (2014) installation of 150-ton new ESR facility and production of 120-ton ESR ingot for 12Cr Hip rotor forgings. in: Proc. of the 19th Int. Forgemasters Meeting — IFM (Tokyo, Japan, 29.09–03.10), 333–337.
6. Lankin, Yu.M., Soloviov, V.G., Tyukalov, V.G., Romanova I.Yu. (2021) Comparison of the processes of electroslag welding at power connection by mono- and bifilar circuits. The Paton Welding J., 11, 22-28. https://doi.org/10.37434/tpwj2021.11.04
7. Solovyov, V.G., Lankin, Yu.M., Tyukalov, V.G., et al. (2022) Prediction of weld parameters in ESW with a bifilar circuit of power source connection. Avtomatich. Svarka, 1, 49-53 [in Ukrainian]. https://doi.org/10.37434/as2022.01.08

Suggested Citation

Yu.M. Lankin, O.P. Bondarenko, V.G. Tyukalov, V.G. Soloviov, I.Yu. Romanova (2022) Experimental studies of bifilar electroslag welding with an equalizing wire. The Paton Welding J., 03, 41-44.