Print

2009 №03 (08) 2009 №03 (01)

The Paton Welding Journal 2009 #03
TPWJ, 2009, #3, 32-33 pages

ELECTROHYDRAULIC-PULSED TREATMENT FOR STRENGTHENING THE SURFACES OF 110G13MLS STEEL FROGS

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 3, 2009 (March)
Pages                      32-33
 
 
Authors
N.A. ONATSKAYA and L.Yu. DEMIDENKO

Institute of Pulse Processes and Technologies, NASU, Nikolaev, Ukraine
 
 
Abstract
The case of samples of point frogs from austenitic steel 110G13MLS was used to demonstrate the possibility of strengthening the surfaces of wear-resistant steels by jet electrohydraulic-pulsed treatment. It is determined that 1.4 times increase of hardness of the surface of a steel sample is caused by microplastic deformation of the sliding and twinning type developing in it. This results in increase of wear-resistance of the steel surface layer.
 
 
Keywords: electrohydraulic-pulsed treatment, austenitic high-manganese steel, wear resistance, surface strengthening, generator of high-velocity jets, microplastic deformation, hardness
 
 
Received:                08.09.08
Published:               28.03.09
 
 
References
1. Pronikov, A.S. (1978) Reliability of machines. Moscow: Mashinostroenie.
2. Merin, B.V. (1985) Electrohydraulic treatment of machinebuilding parts. Leningrad: Mashinostroenie.
3. Kudinov, V.M., Petushkov, V.G., Yurchenko, E.S. et al. (1987) Jet electrohydraulic-pulsed treatment of welded joints. Avtomatich. Svarka, 8, 73-74.
4. Davydov, N.G. (1979) High-manganese steel. Moscow: Metallurgiya.

Suggested Citation

N.A. ONATSKAYA and L.Yu. DEMIDENKO (2009) ELECTROHYDRAULIC-PULSED TREATMENT FOR STRENGTHENING THE SURFACES OF 110G13MLS STEEL FROGS. The Paton Welding J., 03, 32-33.