The Paton Welding Journal, 2010, №04



2010 №04 (04)

2010 №04 (06)

---

TPWJ, 2010, #4, 22-24 pages
 
PROPERTIES OF TUNGSTEN CARBIDE POWDERS PRODUCED BY DIFFERENT TECHNOLOGIES


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 4, 2010 (April)
Pages                      22-24
 
 
Authors
V.I. DZYKOVICH, A.P. ZHUDRA and A.I. BELY
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Investigation results are presented on properties of powders containing particles of tungsten carbides WC-W₂C and produced by different technologies. Physical characteristics of the above particles were evaluated. Chemical and X-ray analysis of the investigated powders were carried out.
 
 
Keywords: hard-facing powders, tungsten carbides, technologies for production of powders, spherical tungsten carbide, properties of tungsten carbides, wear-resistant composite coatings
 
 
Received:                ??.??.??
Published:               28.04.10
 
 
References
1. Meerson, G.A., Zelikman, A.N. (1973) Metallurgy of rare metals. Moscow: Metallurgiya.
2. WOKA carbide materials for wear protective. Welding and PTA applications: Bull.
3. Gladky, P.V., Pereplyotchikov, E.F., Ryabtsev, I.A. (2007) Plasma surfacing. Kiev: Ekotekhnologiya.
4. Dignard, N.M., Boulos, M.I. (1997) Ceramic and metallic powder spheroidization using induction plasma technology. Plasma Technology Research Center (CRTP). In: Proc. of United Thermal Spray Conf. (15-19 Sept., 1997, Indianopolis, USA).
5. Bourdin, E., Fauchais, P., Boulos, M.I. (1983) Induction plasma technology. Int. J. Heat and Mass Transfer, 26(4), 567-582.
6. Pawlovski, L. (1995) The science and engineering of thermal spray coatings. Chichester: John Wiley & Sons.
7. Muns, R. (1995) Particulate systems. Montreal: McGill University.
8. Bely, A.I., Danilchenko, B.V., Goncharenko, V.S. et al. Unit for centrifugal spraying of refractory metal rods. USSR author's cert. 1381840. Publ. 02.02.1987.
9. Yushchenko, K.A., Zhudra, O.P., Bily, O.I. et al. Method for producing of granulated refractory materials. Pat. 20516A Ukraine. Publ. 15.07.97.
10. Samsonov, G.V., Vitryanyuk, V.N., Chaplygin, F.I. (1974) Tungsten carbides. Kiev: Naukova Dumka.
11. Dzykovich, V.I. (2009) Effect of the centrifugal thermal spraying processes on properties of spherical carbide particles. The Paton Welding J., 4, 43-45.

---