The Paton Welding Journal, 2010, №10



2010 №10 (04)

2010 №10 (06)

---

TPWJ, 2010, #10, 17-21 pages
 
MECHANICAL PROPERTIES OF BRAZED JOINTS ON DISPERSION-STRENGTHENED COPPER ALLOY


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 10, 2010 (October)
Pages                      17-21
 
 
Authors
S.V. MAKSYMOVA, V.F. KHORUNOV and V.A. SHONIN
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
The paper gives results of investigations of a set of properties of the brazed joints on a copper alloy strengthened by dispersed particles of Al₂O₃, produced by vacuum brazing using adhesion-active brazing filler metals. It is shown that application of heat treatment of the base metal in combination with filler metal of the Cu-Ti system ensures tensile strength of the brazed joints at a level of 81 % of that of the as-received base metal, and 92 % of that after preliminary heat treatment.
 
 
Keywords: vacuum brazing, dispersion-strengthened copper alloy, butt brazed joint, adhesion-active brazing filler metals, tensile mechanical properties
 
 
Received:                ??.??.??
Published:               28.10.10
 
 
References
1. Kuznetsov, O.A., Pogalov, A.I. (1987) Strength of brazed joints. Moscow: Mashinostroenie.
2. (2003) Reference book on brazing. Ed. by I.E. Petrunin. Moscow: Mashinostroenie.
3. Maksymova, S.V., Khorunov, V.F. (2009) Structural peculiarities of brazed joints on dispersion-strengthened copper. Zbirka Nauk. Prats NUK, 428(6), 90-99.
4. Maksymova, S.V., Khorunov, V.F., Shonin, V.A. et al. (2002) Vacuum brazing of dispersion-strengthened copper alloy Glidcop Al-25. The Paton Welding J., 10, 13-17.

---