Print

2016 №11 (05) DOI of Article
10.15407/tpwj2016.11.06
2016 №11 (07)

The Paton Welding Journal 2016 #11
The Paton Welding Journal, 2016, #11, 36-42 pages
 

Information-measuring system for arc welding and surfacing

Yu.N. Lankin and V.G. Soloviov


E.O. Paton Electric Welding Institute, NASU 11 Kazimir Malevich Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
Abstract
Information-measuring system for arc welding and surfacing was developed. The system allows automatic determination of process state zones, i.e. zone of arc striking, arc running, short-circuiting, open-circuit and arc extinction, thus eliminating any subjectivity in zone identification; and provides an extended set of calculated statistical parameters for each of the states. For this purpose, digitizing of welding current and voltage signals, computer processing by algorithms of automatic recognition and clustering of periodic status zones, using empirical rules, analysis of histograms of distribution of current and voltage signals separately, as well as of histograms of their joint distribution, are used. Built information-measuring system for arc welding and surfacing based on ADC E14-440 and notebook allows calculation of 29 statistical parameters, characterizing the process. Information-measuring system performs automatic identification of the state of welding/surfacing process, thus eliminating the human factor influence on the derived estimates of statistical parameters of the process. 11 Ref., 4 Tables, 8 Figures.
 
Keywords: information-measuring system, welding process, welding, surfacing, clustering, welding process state, arc short-circuiting, arc extinction
 
 
Received:                31.03.16
Published:               14.12.16
 
 
References
  1. Blakeley, P.J. (1992) Developments in monitoring systems for resistance and arc welding. In: of Int. Conf. on Automated Welding Systems in Manufacturing (Gateshead, England, November 1992). Woodhead Publishing, Ltd., 1992, 40.
  2. Wu, C.S., Polte, T., Rehffeldt, D. (2001) A fuzzy logic system for process monitoring and quality evaluation in GMAW. Welding J., 2, 33–38.
  3. ELMA-Technik. Daten-Registrier-Anlage fuer die Schweisstechnik (DAREG): Firmenschrift ELMA-Technik GmbH & Co-KG, Aachen.
  4. ARCDATA LQ-5N System. Geraete zur Ueberwachung, Dokumentation und Regelung der Schweissdaten beim Lichtbogenschweissen: Messer Griesheim Firmenschift 30.0102 d/e.
  5. ARCDATA LQ-2 System. Schweissdaten-Ueberwachungsgeraete zur Qualitaetskontrolle beim Lichtbogenschweissen: Messer Griesheim Firmenschift 30.0104 d/e.
  6. Ogunbiyi, B., Norrish, J. (1996) GMAW metal transfer and arc stability assessment using monitoring indices. In: of 6th Int. Conf. on Computer Technology in Welding (Lanaken, Belgium, 9–12 June 1996).
  7. Pokhodnya, I.K., Gorpenyuk, V.N., Milichenko, S.S. et al. (1990) Metallurgy of arc welding: Processes in arc and melting of electrodes. Ed. by I.K. Pokhodnya. Kiev: PWI.
  8. Beketov, V.G., (2006) Information-measuring system for certification of arc welding power sources (in machine-building): Syn. of Thesis for Cand. of Techn. Sci. Degree. Volgodonsk.
  9. Ulyanova, O.V. (2006) Information-measuring system for certification of arc welding power sources (in machine-building) based on parameters of Markovian model of melting process: Syn. of Thesis for Cand. of Techn. Sci. Degree. Volgodonsk.
  10. Lankin, Yu.N. (2011) Indicators of stability of the GMAW process. The Paton Welding J., 1, 6–13.
  11. Soloviov, V.G., Kapelisty, A.I., Fedas, V.N., Udovenko, T.N. Non-linear filter. Author’s cert. 1190361. Publ. 30.05.1984.
 
 

Suggested Citation

Yu.N. Lankin and V.G. Soloviov (2016) Information-measuring system for arc welding and surfacing. The Paton Welding J., 11, 36-42.