The Paton Welding Journal, 2022, №03



2022 №03 (06)

DOI of Article 10.37434/tpwj2022.03.07

2022 №03 (08)

---

п»їThe Paton Welding Journal, 2022, #3, 49-53 pages

Investigations of the quality of wrought semi-finished products from VT9 titanium alloy produced by electron beam melting

S.V. Akhonin¹, A.Yu. Severin¹, V.O. Berezos¹, O.M. Pikulin¹, V.A. Kryzhanovskyi², O.G. Yerokhin³

¹E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: akhonin.sv@gmail.com
²?NVO Khvylia? Company. 44/1 Naberezhnaja Peremohi, 49094, Dnipro, Ukraine. E-mail: npovolna@ukr.net
³SC ?SPC ?Titan? of the E.O. Paton Electric Welding Institute of the NASU.?. 26, Raketna Str., 03028, Kyiv, Ukraine. ?-mail: titan.paton@gmail.com

Abstract
Complex works were performed to study the quality of wrought semi-finished products, manufactured from an ingot of VT9 titanium alloy. electron beam remelting technology was used to produce ingots of 600 mm diameter and 1.5 m length, from which semi-finished products were manufactured in the form of hot-pressed rods of 315 mm diameter. Results of investigations of structural and mechanical properties of semi-finished products in the form of hot-pressed rods are given. It is shown that the metal of the produced ingots and wrought semi-finished products after the respective heat treatment meets the requirements of the standards.
Keywords: electron beam melting; high-strength titanium alloy; ingot; chemical composition; structure; deformation; mechanical properties

Received: 06.10.2021
Accepted: 16.05.2022

References

1. Pavlova, T.V., Kashapov, O.S., Nochovnaya, N.A. (2012) Titanium Alloys For Gas Turbine Engines. All Materials. Encyclopedic Reference Book. Moscow, Mgty Im. N.E. Bauman [In Russian].
2. Khoreev, A.I., Khoreev, M.A. (2005) Titanium Alloys, Their Application And Prospects Of Development. Materialovedenie, 7, 25-34 [In Russian].
3. Aleksandrov, V.K., Anoshkin, N.F., Bochvar, G.A. Et Al. (1979) Semiproducts From Titanium Alloys. Moscow, Metallurgiya [In Russian].
4. Antonyuk, S.L., Molyar, A.G., Kalinyuk, A.N., Zamkov, V.N. (2003) Titanium Alloys For Aircraft Industry Of Ukraine. Advances In Electrometallurgy, 1, 9-12.
5. Babenko, E.P., Dolzhenkova, E.V. (2014) Examination Of Destruction Causes Of Large-Sized Product From Vt23 Alloy. Metallurgicheskaya I Gornorudnaya Promyshlennost, 3, 82-85 [In Russian].
6. Paton, B.E., Trigub, N.P., Akhonin, S.V., Zhuk G.V. (2006) Electron Beam Melting Of Titanium. Kiev, Naukova Dumka [In Russian].
7. Akhonin, S.V., Severin, A.Yu., Berezos, V.A. et al. (2016) Peculiarities of melting of titanium alloy VT19 ingots in electron beam cold hearth installation. Sovrem. Elektrometall., 2, 23-27 [in Russian]. https://doi.org/10.15407/sem2016.02.03
8. Iliin, A.A., Kolachev, B.A., Polkin, I.S. (2009) Titanium Alloys. Composition, Structure, Properties: Refer. Book. Moscow, Vils-Mati [In Russian].
9. Elagina, L.A., Gordienko, A.I., Ivashko, V.V. Et Al. (1978) Influence Of Structure On Mechanical Properties Of Vt9 And Vt18 Alloys. Tekhnologiya Lyogkikh Splavov, 13, 33-38 [In Russian].
10. (1974) Instruction No. 1054?76: Metallographic Analysis Of Titanium Alloys. Moscow, Viam [In Russian].

---

Suggested Citation

S.V. Akhonin, A.Yu. Severin, V.O. Berezos, O.M. Pikulin, V.A. Kryzhanovskyi, O.G. Yerokhin (2022) Investigations of the quality of wrought semi-finished products from VT9 titanium alloy produced by electron beam melting. The Paton Welding J., 03, 49-53.

---