| 2020 №11 (05) |
DOI of Article 10.37434/as2020.11.06 |
2020 №11 (07) |
"Avtomatychne Zvaryuvannya" (Automatic Welding), #11, 2020, pp. 32-35
Automatic arc surfacing of working paths of lift gates of Kaniv navigation lock
V.I. Galinich, V.M. Taganovskiy, G.V. Kuzmenko
E.O. Paton Electric Welding Institute of the NAS of Ukraine. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
The paper gives the results of development and introduction of the technology of automatic arc surfacing of vertical embedded parts of navigation locks without dismantling them in the case of repair of rails of working paths of lift gates in the Kaniv navigation lock. 2 Ref., 8 Fig.
Keywords: navigation lock, lift gates, guide path rails, automatic arc surfacing
Received: 13.10.2020
References
1. Burmaka, I.O. (2014) Organization aspects of regulating navigation in internal waterways of Ukraine. Mytna Sprava, 1, 87– 93 [in Ukrainian]. http://nbuv.gov.ua/UJRN/Ms_2014_1_15.2. http://ukrvodshliah.org.ua/index.php/kanivskyj-shluz/
This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Suggested Citation
V.I. Galinich, V.M. Taganovskiy, G.V. Kuzmenko (2020) Automatic arc surfacing of working paths of lift gates of Kaniv navigation lock. Automatic Welding, 11, 32-35. https://doi.org/10.37434/as2020.11.06Advertising in this issue:
