The Paton Welding Journal, 2000, №05

2000 №05 (06)

2000 №05 (08)

---

The Paton Welding Journal, 2000, #5, 36-44 pages

Peculiarities of friction welding of dissimilar metals and alloys

I.V. Zyakhor

E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Peculiarities of friction welding of different grades of steels, non-ferrous metals and their alloys in dissimilar combinations, as well as metals to some ceramic materials are considered. Factors affecting formation of the joints made by different methods of friction welding, such as conventional, inertia and combined, are analysed on the basis of experimental data. Some techniques which ensure optimization of thermal-deformation conditions of the formation of the joints are described. Peculiarities of producing the joints in hard-to-weld metals and alloys using intermediate layers are studied.
Keywords: friction welding, technology, dissimilar joints, conventional friction welding, inertia friction welding, combined friction welding, heating and forging stages, process parameters, pressure, rotation speed, upsetting, heating time, braking time, equipment, quality of joints

References

1. Vill, V.I. (1970) Friction welding of metals. Leningrad: Mashinostroyeniye.
2. Jessop, T.J., Nicholas, E.D., Disndale, W.O. (1978) Friction welding dissimilar metals. In: Proc, of 4th Int. Conf on Advances in Welding, Harrogate, England, 1978, May 9-11. Harrogate.
3. Lebedev, V.K., Chernenko, LA., Vill, V.I. et al. (1987) Friction welding. Handbook. Leningrad: Mashinostroyeniye.
4. Lebedev, V.K., Mirgorod, Yu.A., Tsurul, LA. (1989) Friction welding of cylindrical billets of different cross sections. Avtomaticheskaya Svarka, 4, 66 - 69.
5. Chernenko, LA., Reshetnyak, A.V., Filatov, V.E. (1989) Properties of friction welded joints in steel billets of different cross sections. Ibid., 7, 68-71.
6. Chernenko, LA., Zyakhor, I.V. (1999) Friction welding of dissimilar metals and alloys. Svarshchik, 1, 10 - 12.
7. Lebedev, V.K., Mirgorod, Yu.A., Gordonnaya, A.A. (1988) Causes of formation of defects of the «bright ring» type in friction welding. Avtomaticheskaya Svarka, 12, 12 - 15.
8. Pilarczik, Ya., Pietras, A. (1998) Mechanism of release and propagation of heat in friction welding of high-speed steels to structural steels. In: Proc, of Int. Conf, on Welding and Related Technologies for the XXI century. Kyiv: PWI.
9. Chernenko, LA., Mirgorod, Yu.A., Ivanov, L.I. (1984) Inertia friction welding of steel R6M5 to steel 45. Avtomaticheskaya Svarka, 6, 53 - 55.
10. Chernenko, LA., Litvin, L.V., Chovnyuk, V.I. (1981) Inertia friction welding of parts of turbo-compressors. Ibid., 9, 51 – 53.
11. Kuchuk-Yatsenko, S.I. (1998) State of the art and prospects of development of friction welding. In: Proc, of Int. Conf, on Welding and Related Technologies for the XXI century. Kyiv: PWI.
12. Lebedev, V.K., Prodan, S.K. (1979) Electromagnetic drive for welding machines. Avtomaticheskaya Svarka, 7, 63 - 66.
13. Domnin, V.D., Gritsenko, L.A., Repin, F.F. (1978) Investigation and development of technology for manufacture of ship engine valves using friction welding. Transact. of the Gorky Institute for Water Transport Engineers, 162, 29 - 33.
14. Litvin, L.V., Chernenko, L.A., Androshchuk, LA. et al. (1989) Inertia friction welding of heat-resistant steel EI69 to steel 40X. Avtomaticheskaya Svarka, 12, 45 - 48.
15. Chernenko, LA., Litvin, L.V. (1989) Inertia friction welding of bimetal valves for car engines. Kyiv: PWI.
16. Chernenko, LA., Forostovets, B.A., Litvin, L.V. (1990) Inertia friction welding and heat treatment of bimetal valves. Avtomaticheskaya Svarka, 3, 53 - 58.
17. Bell, R.A., Lippold, J.C., Adolphson, D.R. (1984) An evaluation of copper-stainless steel inertia friction welds. Welding J., 11, 325 - 332.
18. Kreye, H., Reiners, G. (1986) Metallurgical aspects and application of friction welding. In: Proc, of Int. Conf, of Trends in Welding Research on Advances in Welding Science and Technology, Gatlinburg, USA, 1986, May 18 - 22. Gatlinburg.
19. Ryabov, V.R. (1983) Welding of aluminium and its alloys to other metals. Kyiv: Naukova Dumka.
20. Chernenko, LA., Ryabov, V.R., Reshetnyak, A.V. (1988) Friction welding of aluminium ADI to steel 12Khl8N10T. Avtomaticheskaya Svarka, 5, 60 - 65.
21. Sarginson, N.M. (1979) A review of the development of friction welded anode hangers In: Exploiting Friction Welding in Production. Abington.
22. Sassani, F., Neelam, J.R. (1988) Friction welding of incompatible materials. Welding J., 11, 264 – 270.
23. Chernenko, I.A., Mirgorod, Yu.A., Tsurul, LA. (1990) Friction welding of bronze Br.012 to steel 40X through a copper interlayer. Avtomaticheskaya Svarka, 9, 50 - 52.
24. Lebedev, V.K., Mirgorod, Yu.A., Tsurul, LA. (1993) Peculiarities of friction welding of bronze Br.012 to steel 40X through a copper interlayer. Ibid., 4, 11 - 14.
25. Litvin, L.V., Kharchenko, G.K., Chernenko, LA. et al. (1986) Friction welding of titanium-steel transition pie¬ces using an aluminium interlayer. Ibid., 5, 73 - 74.
26. Kharchenko, G.K., Prodan, S.K. (1983) Inertia friction welding of titanium to steel. Ibid., 4, 70.
27. Lebedev, V.K., Kharchenko, G.K., Gurevich, S.M. et al. (1979) Inertia friction welding of niobium to iron and steel Khl8N9T. Ibid., 6, 35 - 36, 42.
28. Litvin, L.V., Chernenko, LA., Kolosok, N.A. (1990) Friction welding of electrical equipment contacts. Ibid., 8, 71 - 72.
29. Baeslack, W.A., Threadgill, P.L., Nicholas, E.D. et al. (1995) Linear friction welding of Ti-4A1-2Cr-2Nb (at %) titanium aluminide. In: Proc, of Titanium’95 8th Int. Conf, on Science and Technology, Birmingham, 1995, Oct. 22 - 29. Birmingham.
30. Shternin, L.A. (1965) Friction welding of dissimilar metals. Svarochnoye Proizvodstvo, 3, 11 - 13.
31. Elliott, S., Wallach, E.R. (1981) Joining aluminium to steel. Part 2. Friction welding. Metal Construction, 4, 221 - 225.
32. Wadleigh, A. (1991) Joining dissimilar metals. Fabricator, 9, 14 - 16.
33. Zyakhor, I.V., Kuchuk-Yatsenko, S.I. (1997) Friction welding of steel 12Kh18N10T aluminium alloy 1420 transition pieces. In: Proc, of Welding’97 Russian Sci. Tech. Conf, on Advances in Welding Science and Technology, Voronezh, 1997, Sept. 16 - 18. Voronezh.
34. Zyakhor, I.V. (1999) New equipment for friction welding. Svarshchik, 2, 20.

---

Suggested Citation

I.V. Zyakhor (2000) Peculiarities of friction welding of dissimilar metals and alloys. The Paton Welding J., 05, 36-44.

---