The Paton Welding Journal, 2002, №09

2002 №09 (03)

2002 №09 (05)

---

The Paton Welding Journal, 2002, #9, 9-14 pages

Peculiarities of phase formation in pressure welding of dissimilar metals under conditions of high-rate deforming

L.I. Markashova, V.V. Arsenyuk, G.M. Grigorenko, E.N. Berdnikova

E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Results of investigations into peculiarities of the processes of mass transfer and phase formation in joints of dissimilar metals characterized by a limited mutual solubility (Cu + Al, Ti + stainless steel, St.3 + Al, etc.) are given. The joints were made by pressure welding using high-rate methods of deforming
Keywords: pressure welding, explosion welding, dissimilar joints, rate of deforming, dislocations, segregation, phase formations, stoichiometric composition, structural parameters, yield strength, hardening, mechanical properties

References

1. Einbinder, S.B., Glude, R.K., Loginova, A.Ya. et al. (1964) Principles of theory of pressure welding. Avtomatich. Svarka, 5, 21-27.
2. Gelman, A.S. (1970) Principles of pressure welding. Moscow: Mashinostroenie.
3. Kochergin, A.K., Shestakov, A.I. (1968) Some peculiarities of welded joint formation and calculation of pressure welding parameters. In: Welding, Issue 2.
4. Shron, R.Z., Zelezin, V.N. (1978) Heat treatment and properties of welded joints. Leningrad: Mashinostroenie.
5. Bakshi, O.A. (1977) Theory and practice of welding manufacturing. Sverdlovsk.
6. Hokamoto, K., Izuma, T., Andoh, T. et al. (1993) Parameters of explosion welding and strength of joint in cladding stainless steel with different aluminium alloys using an intermediate stainless steel plate. J. JWS, 1, 16-21.
7. Ito, Y., Shindo, T., Saito, M. et al. (1998) Characteristics of behaviour of diffusion in the transition zone of a copperaluminium joint during friction welding. Transact, of Jap. Soc. Meeh. Eng. A, 618, 494-499.
8. Abe, A. (1997) Numerical study of the mechanism of wary interface generation in explosive welding. JSME Int. J. B, 3, 395-401.
9. Trykov, Yu.P., Arisova, V.N., Volobuev, S.A. et al. (1997) Structure and properties of titanium-steel composite made by explosion welding. Svarochn. Proizvodstvo, 8, 8-11.
10. Markashova, L.I., Sabokar, V.K., Zamkov, V.N. et al. (1995) Structure-phase transformations in contact zone during pressure welding of titanium with copper. Avtomatich. Svarka, 12, 8-13.
11. Darovsky, Yu.F., Markashova, L.I., Abramov, N.P. et al. (1985) Method of preparation for electron microscopic examinations. Ibid., 12, 60.
12. Panin, V.E., Likhachev, V.A., Grinyaev, Yu.V. (1985) Structural levels of deformation of solids. Novosibirsk: Nauka.
13. Suzuki, H. (1967) About yield strength of polycristalline metals and alloys. In: Structure and mechanical properties of metals. Moscow: Metallurgiya.
14. Ashby, M.F. (1972) On Orowan stress. In: Physics of strength and plasticity. Moscow: Metallurgiya.
15. Goldshtejn, M.I., Litvinov, V.S., Bronfin, B.M. (1986) Physics of metals of high-strength alloys. Moscow: Metallurgiya.
16. Konrad, G. (1973) Strain hardening model used to describe the influence of grain size on metal flow stress. In: Superfine grains in metals. Moscow: Metallurgiya.
17. Armstrong. R.V. (1973) Strength properties of superfine grain metals. Ibid.
18. Petch, N.J. (1953) The cleavage strength of polycristalline. Iron and Steel Inst., 1, 25-28.
19. Orowan, E. (1954) Dislocation in metals. New York: AIME.
20. Ashby, M.F. (1983) Mechanisms of deformation and fracture. Adv. Appl. Meeh., 23, 118-177.
21. Kelly, A., Nicholson, R. (1966) Dispersion hardening. Moscow: Metallurgiya.
22. Ebelling, R., Ashby, M.F. (1966) Yielding and flow of two phase copper alloys. Phil. Mag., 7, 805-809.
23. Markashova, L.I., Grigorenko, G.M., Arsenyuk, V.V. et al. (1998) On interaction between structure and properties of steel-aluminium joints made by friction welding. Avtomatich. Svarka, 8, 7-14

---

Suggested Citation

L.I. Markashova, V.V. Arsenyuk, G.M. Grigorenko, E.N. Berdnikova (2002) Peculiarities of phase formation in pressure welding of dissimilar metals under conditions of high-rate deforming. The Paton Welding J., 09, 9-14.

---