The Paton Welding Journal, 2009, №06

2009 №06 (08)

2009 №06 (01)

---

The Paton Welding Journal, 2009, #6, 44-46 pages

Equipment and consumables for hard-facing of lining plate elements

A.P. Zhudra¹, A.P. Voronchuk¹, S.I. Veliky²

¹E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.
²Experimental Design Bureau of the E.O.Paton Electric Welding Institute, NASU, Kiev, Ukraine

Abstract
The data are presented on the developed, manufactured and applied machine AD 380.03M, which is intended for hard-facing of low-carbon steel plates with thickness of 5 to 30 mm and dimensions of 1500 x 3000 mm. Thickness of the deposited layer can be varied from 3 to 17 mm. Characteristics of the machine, main point of the process, hard-facing consumables, and fields of applications of hardened plates are described.
Keywords: plate, machine, control system, hard-facing, flux-cored strip, technology, application

References

1. Danilchenko B.V., Shimanovsky V.P., Voronchuk A.P. et al. (1989) Hard-facing of rapidly wearing parts by self-shielding flux-cored strips. Avtomaticli. Svarka, 5, 38-41.
2. Terpilo, V.N Shimanovsky, V.P. (1988) Technology of hard-facing of thin sheets by flux-cored strips. In: Proc. of Conf. of Junior Scientists and Specialists (Kiev, 1988).

---

Suggested Citation

A.P. Zhudra, A.P. Voronchuk, S.I. Veliky (2009) Equipment and consumables for hard-facing of lining plate elements. The Paton Welding J., 06, 44-46.

---