Print

2012 №01 (05) 2012 №01 (07)

The Paton Welding Journal 2012 #01
The Paton Welding Journal, 2012, #1, 23-25 pages  

INFLUENCE OF VIBRATION OF PARTS ON STRUCTURE AND PROPERTIES OF METAL IN SURFACING

Ch.V. PULKA1, O.N. SHABLY1, V.S. SENCHISHIN1, M.V. SHARYK1 and G.N. GORDAN2


1Ternopol Ivan Pulyuj National Technical University, Ternopol, Ukraine
2E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Presented are the investigation results of structure and properties of metal deposited by induction method with superposition of vibrations in a period of melting of a surfacing consumable. It is shown that the superposition of vibrations leads to improvement of wear resistance of the deposited metal due to refinement of its structure.
 
 
Keywords: induction surfacing, inductor, specific power, vertical and horizontal vibrations, deposited metal, structure, wear resistance
 
 
Received:                03.10.11
Published:               28.01.12
 
 
References
1. Tkachev, V.N., Fishtejn, B.M., Kazintsev, N.V. et al. (1970) Induction surfacing of hard alloys. Moscow: Mashinostroenie.
2. Pulka, Ch.V. (2003) Hardfacing the working components of tillage and harvesting agricultural machinery (Review). The Paton Welding J., 8, 35-40.
3. Shably, O.M., Pulka, Ch.V., Senchishin, V.S. et al. Method for surfacing of thin plane steel parts. Pat. on useful model 54204 UA. Int. Cl. B23K 13/00. Publ. 25.10.2010.
4. Pulka, Ch.V., Senchishin, V.S. Device for surfacing of thin shaped disks. Pat. on useful model 59994 UA. Int. Cl. B23K 13/00. Publ. 10.06.2011.
5. Pulka, Ch.V., Senchishin, V.S. Method of surfacing of parts. Pat. on useful model 64371 UA. Int. Cl. B23K 13/00. Publ. 10.11.2011.
6. Shably, O.M., Pulka, Ch.V., Senchishin, V.S. (2011) Vibroinduction surfacing of thin plane parts. In: Abstr. of 10th Int. Symp. of Ukr. Mechanical Engineers (Lviv, 25-27 May, 2011), 289-290.
7. Yuzvenko, Yu.A., Gavrish, V.A., Marienko, V.A. (1979) Laboratory machines for assessment of wear resistance of deposited metal. In: Theoretical and technological principles of surfacing. Properties and tests of deposited metal. Kiev: PWI.

Suggested Citation

Ch.V. PULKA1, O.N. SHABLY1, V.S. SENCHISHIN1, M.V. SHARYK1 and G.N. GORDAN2 (2012) INFLUENCE OF VIBRATION OF PARTS ON STRUCTURE AND PROPERTIES OF METAL IN SURFACING. The Paton Welding J., 01, 23-25.