The Paton Welding Journal, 2009, №03



2009 №03 (02)

2009 №03 (04)

---

TPWJ, 2009, #3, 11-14 pages

FEATURES OF RESISTANCE WELDING OF TITANIUM ALUMINIDES USING NANOLAYERED ALUMINIUM-TITANIUM FOILS

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 3, 2009 (March)
Pages                      11-14
 
 
Authors
V.S. KUCHUK-YATSENKO, V.I. SHVETS, A.G. SAKHATSKY and A.A. NAKONECHNY
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Peculiarities and prospects of application of resistance welding of titanium aluminides are considered. It is shown that nanolayer foils of the Ti-Al system used as inserts provide uniform heating of the workpiece and improve formation and properties of the joints.
 
 
Keywords: resistance welding, titanium aluminide, nanostructured foil, microstructure, highly concentrated heating, heat-affected zone, near-weld zone
 
 
Received:                03.10.08
Published:               28.03.09
 
 
References
1. Povarova, K.B., Bannykh, O.A. (2001) Structure and properties of alloys on the base of titanium aluminides. In: Metals science and technology of light alloys. Moscow: VILS.
2. Gam, G., Bohm, K.N., Kocak, M. (1999) Diffusionsschweissen fein gegossener Titanaluminide. Schweissen und Schneiden, 8, 470-475.
3. Patterson, R.A., Martin, P.L., Damkroger, B.K. et al. (1990) Titanium aluminide: electron beam weldability. Weld. Res. Supplement, 1, 39-44.
4. Yushtin, A.N., Zamkov, V.N., Sabokar, V.K. et al. (2001) Pressure welding of g-TiAl intermetallic alloy. The Paton Welding J., 1, 33-37.
5. Kuchuk-Yatsenko, S.I. (1992) Flash-butt welding. Kiev: Naukova Dumka.
6. Kuchuk-Yatsenko, V.S., Shvets, V.I., Sakhatsky, A.G. et al. (2007) Specifics of resistance welding of aluminium alloys using nanostructured aluminium-nickel and aluminium-copper foils. Svarochn. Proizvodstvo, 9, 12-14.
7. Ustinov, A.I., Olikhovskaya, L.A., Melnichenko, T.V. et al. (2008) Solid-phase reactions in heating of multilayer Al/Ti foils produced by electron beam deposition method. Advances in Electrometallurgy, 2, 19-26.

---

Suggested Citation

V.S. KUCHUK-YATSENKO, V.I. SHVETS, A.G. SAKHATSKY and A.A. NAKONECHNY (2009) FEATURES OF RESISTANCE WELDING OF TITANIUM ALUMINIDES USING NANOLAYERED ALUMINIUM-TITANIUM FOILS. The Paton Welding J., 03, 11-14.

---