The Paton Welding Journal, 2009, №11



2009 №11 (15)

2009 №11 (17)

---

TPWJ, 2009, #11, 68-70 pages  
POSSIBILITY OF PRESERVATION OF SHAPE AND SIZE OF CYLINDRICAL TUBULAR BILLETS OF MOULDS IN EXPLOSION CLADDING


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 11, 2009 (November)
Pages                      68-70
 
 
Authors
Yu.P. MESHCHERYAKOV, V.M. OGOLIKHIN and I.V. YAKOVLEV
Engineering and Design Branch of the M.A. Lavrentiev Institute of Hydrodynamics, RAS SD, Novosibirsk, RF
 
 
Abstract
The paper deals with the possibility of preservation of specified shape and size of tubular billets of moulds in explosion cladding of pipes with mounting of fillers inside the latter, namely shot, shot with water, gun grease and saltpeter melts. It is shown that utilization of metal shot as a filler is promising for preservation of shape and dimensions without large additional costs.
 
 
Keywords: mould, cylindrical tubular billets, cladding of tubular billets, explosion welding, internal cavity, filler material, metal shot, mounting and removal of filler, pulse, stress, shape and size of billets
 
 
Received:                ??
Published:               28.11.09
 
 
References
l.              (1980) Electrothermal equipment: Refer. Book. Ed. by A.P. Altgauzen. Moscow: Energiya.
2.             Medovar, B.I. (1976) Electroslag furnaces. Kiev: Naukova Dumka.
3.             (1985) Development and application of new technological explosion welding processes of dissimilar metals in manufacturing of electrothermal equipment: Report of researches 02850058758. Novosibirsk: SO AN SSSR.
4.             Gokhshtejn, B.E., Sedykh V.S. (1965) Explosion welding of cylindrical joints and adapting pipes from dissimilar metals. In: High-efficiency methods of welding in chemical and oil machine-building. Issue 3. Explosion welding. Moscow: TsINTIKhlMNEFTEM ASh.
5.             Gaek, Yu.V., Melikhov, V.P. (1977) Focusing of cumulative jets in explosion welding of rotation bodies. In: Application of explosion energy in welding technique. Kiev: PWI.
6.             Ogolikhin, V.M., Yakovlev, I.V. (2009) Explosion welding in electrometallurgy. Novosibirsk: SO RAN.
7.             Meshcheryakov, Yu.P. (2008) Numerical investigation of damping properties of rod structures in pulse loading. Izvestiya VolgGTU, 41(3), Issue 3, 101-104.

---

Suggested Citation

Yu.P. MESHCHERYAKOV, V.M. OGOLIKHIN and I.V. YAKOVLEV (2009) POSSIBILITY OF PRESERVATION OF SHAPE AND SIZE OF CYLINDRICAL TUBULAR BILLETS OF MOULDS IN EXPLOSION CLADDING. The Paton Welding J., 11, 68-70.

---