The Paton Welding Journal, 2012, №01



2012 №01 (05)

2012 №01 (07)

---

The Paton Welding Journal, 2012, #1, 23-25 pages  

INFLUENCE OF VIBRATION OF PARTS ON STRUCTURE AND PROPERTIES OF METAL IN SURFACING

Ch.V. PULKA¹, O.N. SHABLY¹, V.S. SENCHISHIN¹, M.V. SHARYK¹ and G.N. GORDAN²

¹Ternopol Ivan Pulyuj National Technical University, Ternopol, Ukraine
²E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Presented are the investigation results of structure and properties of metal deposited by induction method with superposition of vibrations in a period of melting of a surfacing consumable. It is shown that the superposition of vibrations leads to improvement of wear resistance of the deposited metal due to refinement of its structure.
 
 
Keywords: induction surfacing, inductor, specific power, vertical and horizontal vibrations, deposited metal, structure, wear resistance
 
 
Received:                03.10.11
Published:               28.01.12
 
 
References
1. Tkachev, V.N., Fishtejn, B.M., Kazintsev, N.V. et al. (1970) Induction surfacing of hard alloys. Moscow: Mashinostroenie.
2. Pulka, Ch.V. (2003) Hardfacing the working components of tillage and harvesting agricultural machinery (Review). The Paton Welding J., 8, 35-40.
3. Shably, O.M., Pulka, Ch.V., Senchishin, V.S. et al. Method for surfacing of thin plane steel parts. Pat. on useful model 54204 UA. Int. Cl. B23K 13/00. Publ. 25.10.2010.
4. Pulka, Ch.V., Senchishin, V.S. Device for surfacing of thin shaped disks. Pat. on useful model 59994 UA. Int. Cl. B23K 13/00. Publ. 10.06.2011.
5. Pulka, Ch.V., Senchishin, V.S. Method of surfacing of parts. Pat. on useful model 64371 UA. Int. Cl. B23K 13/00. Publ. 10.11.2011.
6. Shably, O.M., Pulka, Ch.V., Senchishin, V.S. (2011) Vibroinduction surfacing of thin plane parts. In: Abstr. of 10^th Int. Symp. of Ukr. Mechanical Engineers (Lviv, 25-27 May, 2011), 289-290.
7. Yuzvenko, Yu.A., Gavrish, V.A., Marienko, V.A. (1979) Laboratory machines for assessment of wear resistance of deposited metal. In: Theoretical and technological principles of surfacing. Properties and tests of deposited metal. Kiev: PWI.

---

Suggested Citation

Ch.V. PULKA¹, O.N. SHABLY¹, V.S. SENCHISHIN¹, M.V. SHARYK¹ and G.N. GORDAN² (2012) INFLUENCE OF VIBRATION OF PARTS ON STRUCTURE AND PROPERTIES OF METAL IN SURFACING. The Paton Welding J., 01, 23-25.

---