The Paton Welding Journal, 2020, #12, 27-33 pages
Development of remotely-controlled equipment and technology for laser welding repair and restoration of performance of NPP steam generators
V.D. Shelyagin, A.V. Bernadskyi, O.V. Siora, V.A. Kurylo and O.M. Suchek
E.O. Paton Electric Welding Institute of the NAS of Ukraine
11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
Abstract
Control straight butt joints of 10Kh18N10T and 10Kh17N13M3T steel blanks were welded in the vertical position
with incomplete penetration by the thickness. Visual and radiographic examination, and metallographic investigations
were performed, and welded joint microhardness was determined. Parameters of technological welding modes of the
studied circumferential welded joints were established. Conditions of compliance with quality category «high B» of
DSTU EN ISO 13919–1:2015 standard were the criterion for selection of appropriate parameters of the modes of laser
welding of circumferential butt joints. As a result of work performance, it is shown that the point of welding start
influences the dimensions of the weld section, in which the welding process is stabilized, and specified penetration
depth is achieved. The techniques developed by the authors were verified on simulator-samples during pilot testing of
the model of remotely-controlled equipment developed for repair and restoration of performance of PGV-1000М type
steam generators. 18 Ref., 2 Tables, 9 Figures.
Keywords: repair of NPP steam generator, heat-exchanger tubes, laser welding, technology, equipment
Received 11.11.2020
References
1. Kvasnytskyi, V.V., Kvasnytskyi, V.F., Hexing, C. et al. (2018). Diffusion welding and brazing of dissimilar materials with controlled stress-strain state. The Paton Welding J., 12, 70-76.
https://doi.org/10.15407/tpwj2018.12.072. Wu, Q., Xu, Q., Jiang, Y., Gong, J. (2020). Effect of carbon migration on mechanical properties of dissimilar weld joint. Engineering Failure Analysis, 117, 104935.
https://doi.org/10.1016/j.engfailanal.2020.1049353. Kvasnitsky, V.V., Kvasnitsky, V.F., Markashova, L.I., Matvienko, M.V. (2014) Effect of stress-strain state on structure and properties of joints in diffusion welding of dissimilar metals. The Paton Welding J., 8, 8-14.
https://doi.org/10.15407/tpwj2014.08.014. (2018) State Enterprise «National Nuclear Energy Generating Company «Energoatom». Strategic plan of development of State Enterprise «National Nuclear Energy Generating Company «Energoatom» for 2018-2022 [in Ukrainian]. http://www.energoatom.com.ua/files/file/strateg_chniy_plan_2018_2022_04042018.pdf
5. Steam generator PGV-1000M. Description and main characteristics. http://desnogorskspektr.ru/aes/teoriya-aes/parogenerator-pgv-1000m.-opisanie-i-osnovnye-harakteristiki.html [in Russian].
6. Shugailo, O.P. (2019) Stress-strain state steam generator tubular elements in emergencies. In: Syn. of Thesis for Cand. of Tekhn. Sci. Degree. Kyiv, IM [in Ukrainian].
7. Margulova, T.Kh. (1984) Nuclear power stations. Moscow, Vysshaya Shkola [in Russian].
8. Zarazovsky, M.N., Borodij, M.V., Kozlov, V.Ya. (2016) Risk-oriented approach to prediction of integrity and optimization of control of heat-exchange equipment with large defect statistics. Yaderna ta Radiatsiina Bezpeka, 4, 32-38 [in Russian].
https://doi.org/10.32918/nrs.2016.4(72).059. IAEA-TECDOC-1577. (2007). Strategy for assessment of WWER steam generator tube integrity. Vienna, IAEA.
10. Xiang, J., Chen, F.F., Park, H. et al. (2020). Numerical study of the metal vapour transport in tungsten inert-gas welding in argon for stainless steel. Applied Mathematical Modelling, 79, 713-728.
https://doi.org/10.1016/j.apm.2019.11.00111. Kumar, S.R., Ravishankar, B., Vijay, M. (2020). Prediction and analysis of magnetically impelled arc butt welded dissimilar metal. Materials Today: Proceedings, 27, 2037- 2041.
https://doi.org/10.1016/j.matpr.2019.09.05412. Selvan, C.P.T., Dinaharan, I., Palanivel, R., Kalaiselvan, K. (2020). Predicting the tensile strength and deducing the role of processing conditions of hot wire gas tungsten arc welded pure nickel tubes using an empirical relationship. Int. J. Pressure Vessels and Piping, 188, 104220.
https://doi.org/10.1016/j.ijpvp.2020.10422013. Sahul, M., Tomčíková, E., Sahul, M. et al. (2020). Effect of disk laser beam offset on the microstructure and mechanical properties of copper - AISI 304 stainless steel dissimilar metals joints. Metals, 10, 10, 1294.4
https://doi.org/10.3390/met1010129414. Ramakrishna R., V.S.M., Amrutha, P.H.S.L.R., Rahman Rashid, R.A., Palanisamy, S. (2020). Narrow gap laser welding (NGLW) of structural steels - a technological review and future research recommendations. Int. J. Adv. Manuf. Technol. 111, 2277-2300.
https://doi.org/10.1007/s00170-020-06230-915. Shelyagin, V.D., Bernatskyi, A.V., Berdnikova, O.M. et al. Effect of Technological Features of Laser Welding of TitaniumAluminium Structures on the Microstructure Formation of Welded Joints. Metallofiz. Noveishie Tekhnol, 42, 363- 379.
https://doi.org/10.15407/mfint.42.03.036316. Li, L., Mi, G., Zhang, X. et al. (2019). The influence of induction pre-heating on microstructure and mechanical properties of S690QL steel joints by laser welding. Optics & Laser Technology, 119, 105606.
https://doi.org/10.1016/j.optlastec.2019.10560617. Soltani, H.M., Tayebi, M. (2018). Comparative study of AISI 304L to AISI 316L stainless steels joints by TIG and Nd: YAG laser welding. J. of Alloys and Compounds, 767, 112-121.
https://doi.org/10.1016/j.jallcom.2018.06.30218. Technologies for non-destructive testing and repair of NPP components. NUSIM 2008 VUJE. https://inis.iaea.org/collection/NCLCollectionStore/_Public/43/124/43124116.pdf.
Suggested Citation
V.D. Shelyagin, A.V. Bernadskyi, O.V. Siora, V.A. Kurylo and O.M. Suchek (2020) Development of remotely-controlled equipment and technology for laser welding repair and restoration of performance of NPP steam generators.
The Paton Welding J., 12, 27-33.