Automatic Welding, 2022, №04



2022 №04 (04)

DOI of Article 10.37434/as2022.04.05

2022 №04 (06)

---

Avtomaticheskaya Svarka (Automatic Welding), #4, 2022, pp. 34-40

Programming electron beam scan pattern for welding with heat treatment

V.G. Soloviov, Yu.M. Lankin, I.Yu. Romanova

E.O. Paton Electric Welding Institute of the NAS of Ukraine. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

Electron beam scan pattern for electron beam welding and heat treatment should ensure the temperature-time parameters of structural-phase transformations in the metal processing zone: degree of heating, nature of heat distribution, cooling and heating rate. Thermal cycles can be regulated by controlling the thermal power of the electron beam, its focusing and space-time position. A multi-purpose computer program was developed for scan pattern design, which allows realization of the scan pattern with an arbitrary (set by the technologist) resulting distribution of electron beam power density by the points of its dwelling in the zone of impact on the metal for welding and heat treatment of the product. As a result, variations of currents of the defl ecting coils and focal lens synchronized with the scan pattern, are calculated. 10 Ref., 8 Fig.
Keywords: electron beam technologies, beam power density, electron beam scan pattern, heat treatment, graphic computer design of the scan.


Received: 31.03.2022

References

1. Nazarenko, O.K., Kajdalov, A.A., Kovbasenko, S.N. et al. (1987) Electron beam welding. Ed. by B.E. Paton. Kyiv, Naukova Dumka [in Russian].
2. Lankin, Yu.N., Bajshtruk, E.N. (1988) Generators of electron beam scanning for welding and heat treatment. In: Automatic control of processes of welding and coating deposition. Kyiv, PWI, 106-110 [in Russian].
3. Zenker, R. (2002) Electron beam surface treatment and multipool welding – state of the art. In: Proc. of Int. Conf. on High-Power Electron Beam Technology - EBEAM 2002 (27- 29.10.2002, Hilton Head Island), 12-1–12-5.
4. Lankin, Yu.N., Mishchenko, V.P. (1977) Arbitrary-shape voltage generator for electron beam scanning. Information letter No. 15. Kyiv, PWI [in Russian].
5. Olshanskaya, T.V., Salomatova, E.S. (2016) Review of modern methods of beam control in electron beam welding. Vestnik PNIPU, Mashinostroenie, Materialovedenie, 18(4), 169–187 [in Russian].
6. Lankin, Yu.N., Bondarev, A.A., Dovgodko, E.I., Dyachenko, V.A. (2009) Control system for beam scanning in electron beam welding. The Paton Welding J., 9, 13-16.
7. Lankin, Yu.N., Soloviov, V.G., Semikin, V.F. et al. (2017) Computer system of graphic design of scannings and modeling of resultant distribution of electron beam current density. In: Proc. of 8th Int. Conf. on Beam Welding Technologies and Processing of Materials (Odessa, Ukraine, 11-15 September 2017).
8. Skryabinskyi, V.V., Nesterenkov, V.M., Rusynyk, M.O. (2020) Electron beam welding with programming of beam power density distribution. The Paton Welding J., 1, 49-53. https://doi.org/10.37434/tpwj2020.01.07
9. Rykalin, N.N. (1951) Calculations of thermal processes in welding. Moscow, Mashgiz [in Russian].
10. Lankin, Yu.N. (1999) Calculation of electron beam heat source for welding with heat treatment.

---

Advertising in this issue:

---