Eng
Ukr
Rus
Print
2018 №04 (05) DOI of Article
10.15407/tdnk2018.04.06
2018 №04 (07)

Technical Diagnostics and Non-Destructive Testing 2018 #04
Technical Diagnostics and Non-Destructive Testing №4, 2018, pp. 45-50
Sensitivity of testing via electromagnetic-acoustic transducers (Overview, p. 1)

Authors:
G. M. Suchkov, S. Yu. Plesnetsov
National Technical University «Kharkiv Polytechnic Institute». 61002, Kharkiv, 2 Kirpichova st. E-mail: hpi.suchkov@gmail.com

Abstract:
The analysis of information sources in the field of sensitivity of ultrasonic non-destructive testing of metal products by instruments and devices with electromagnetic-acoustic transducers was performed. It is established that, in comparison to the traditional contact testing method in its field of application: the testing of metals without special surface preparation, automatic and automated testing with high productivity, EMA testing has significant advantages. In many cases, the sensitivity of flaw detection using EMAT is not inferior to the traditional contact method, and in some cases even exceeds it. 17 Re., 5 Tabl.
Keywords: electromagnetic-acoustic control, metalware, testing sensitivity, detectability of defects, determination of physical-mechanical characteristics of metal products, thickness measurement.

Received: 17.09.2018
Published: 11.12.2018

References
1. Plesnetsov, S.Yu., Suchkov, G.M., Korzh, A.I., Suvorova, M.D. (2018) New theoretical investigations and developments in the field of electromagneto-acoustic transformation (Review). Tekh. Diagnost. i Nerazrush. Kontrol, 2, 24-31 [in Russian]. https://doi.org/10.15407/tdnk2018.02.03
2. Suchkov, G.M., Plesnetsov, S.Yu., Korzh, A.I., Suvorova, M.D., Yudanova, N.N. (2018) New developments of electromagneto-acoustic transducers (Review). Ibid., 3, 27-34 [in Russian]. https://doi.org/10.15407/tdnk2018.03.03
3. Ermolov, I.N., Lange, Yu.V. (2004) Non-destructive testing: Handbook. In: 7 Vol. Ed. by V.V. Klyuev. V. 3: Ultrasonic testing. Moscow, Mashinostroenie [in Russian].
4. Tsapenko, V.K., Kuts, Yu.V. (2010) Fundamentals of non-destructive ultrasonic testing: Handbook. Kyiv: NTUU KPI [in Ukrainian].
5. Aleshin, N.P., Belyy, V.E., Vopilkin, A.Kh. et al. (1989) Methods of acoustic testing of metals. Ed. by Aleshin, N.P. Moscow, Mashinostroenie [in Russian].
6. Kawashima, K., McClung, R. (1976) Electromagnetic ultrasonic transducer for generating and detecting longitudinal waves (with a small amount of radials polarized transverse. Materials Evaluation, 34(4), 81-90.
7. Sychkov, G.M., Petrishchev, O.N., Khomyak, Yu.V. (2015) Theory and practice of electromagneto-acoustic testing. Pt 3: Methods and means of increase of sensitivity by ultrasonic EMA testing. Kharkov, Shchedra Sadyba Plus [in Russian].
8. Budenkov, G.A., Korobejnikova, O.V. (2009) The influence of metal chemical structure and temperature on efficiency of electromagneto-acoustic transformation. Defektoskopiya, 4, 40-49 [in Russian].
9. Astafiev, A.N., Nevolin, O.V., Mamaj, A.M. et al. (2006) Universal add-on for standard ultrasonic defectoscopes and thickness gauges. Ibid., 7, 73-82 [in Russian].
10. Muraviova, O.V., Muraviov, V.V., Strizhak, V.A. et al. (2013) Real sensitivity of input acoustic testing of rod samples in spring production. V Mire Nerazrushayushchego Kontrolya, 1, 62-70 [in Russian].
11. http://www.ultracon-service.com.ua/index.php/ru/flaw-detectors/item/85-ema-ultrazvukovoj-defektoskop-oko-22m-ema [in Russian].
12. http://docplayer.ru/45792425-Vozmozhnosti-i-sposoby-izmereniya-krn-ultrazvukovym-metodom-nerazrushayushchego-kontrolya.html [in Russian].
13. Guo-fu Zhai, Bo Liu, Chao-ran Deng, Yong-qian Li, Lei Kang (2014) An inspection device based on multiple Lamb wave electromagnetic acoustic transducers. In: Proc. of 2014 IEEE Far East Forum on Nondestructive Evaluation/Testing, 14-18. https://doi.org/10.1109/FENDT.2014.6928225
14. Suchkov, G.M., Donchenko, A.V. (2007) Actual EMA-device sensitivity. Defektoskopiya, 6, 43-50 [in Russian].
15. Yakun Wang, Pengzhan Li, Bo Liu, Guofu Zhai (2013) A portable inspection instrument based on electromagnetic acoustic transducers. In: Proc. of 2013 IEEE Far East Forum on Nondestructive Evaluation/Testing: New Technology, 192-196. DOI: 10.1109/FENDT.20.
16. Suchkov, G.M., Petrishchev, O.N., Khashchina, S.V. et al. (2013) The increase in functionality of no-contact defect detection for roll-formed ferromagnetic products. Kontrol. Diagnostika, 4, 31-35 [in Russian].
17. Suchkov, G.M. (2005) Development of theory and practice in electromagnetic-acoustic testing device building for metal product testing. In: Syn. of Thesis for Dr. of Techn. Sci. Degree. Kharkov, NTU KhPI [in Russian].
>