2015 №04 |
DOI of Issue https://doi.org/10.15407/tpwj2015.06 |
2015 №07 |

CONTENTS
MODERN METHODS OF SURFACING, TECHNOLOGIES OF SURFACING AND THEIR APPLICATION
- Turyk E. and Rybtsev I.A. Experience in application of the European standards for qualification of surfacing procedures ... 5 https://doi.org/10.15407/tpwj2015.06.01
- Pereplyotchikov E.F. Plasma-powder surfacing of nickel and cobalt alloys on copper and its alloys ... 10 https://doi.org/10.15407/tpwj2015.06.02
- Yarovitsyn A.V. Energy approach in analysis of microplasma powder surfacing modes ... 14 https://doi.org/10.15407/tpwj2015.06.03
- Som A.I. Effect of scheme of powder feeding into arc on its losses and efficiency of plasma-powder surfacing process ... 22 https://doi.org/10.15407/tpwj2015.06.04
- Khaskin V.Yu., Shelyagin V.D. and Bernatsky A.V. Modern state and challenges for development of laser and hybrid surfacing technologies (Review) ... 26 https://doi.org/10.15407/tpwj2015.06.05
- Kuskov Yu.M., Gordan G.N., Bogajchuk I.L. and Kajda T.V. Electroslag surfacing using discrete materials of different methods of manufacture ... 30 https://doi.org/10.15407/tpwj2015.06.06
- Kuzmenko O.G. Peculiarities of heating of stamped billets in non-consumable electrode electroslag surfacing ... 34 https://doi.org/10.15407/tpwj2015.06.07
- Majdanchuk T.B., Ilyushenko V.M. and Bondarenko A.N. Improvement of bimetal joint quality in submerged arc surfacing of high-tin bronze on steel ... 37 https://doi.org/10.15407/tpwj2015.06.08
- Lendel I.V., Maksimov S.Yu., Lebedev V.A. and Kozyrko O.A. Effect of pulsed electrode wire feeding on formation and wear resistance of deposited bead and losses of electrode metal in CO2 arc surfacing ... 41 https://doi.org/10.15407/tpwj2015.06.09
- Peremitko V.V. and Nosov D.G. Optimization of modes of submerged arc surfacing over the layer of alloying charge of caterpillar machine running gear parts ... 44 https://doi.org/10.15407/tpwj2015.06.10
- Kuznetsov V.D. and Stepanov D.V. Wear-resistant surfacing with feeding of nanopowders to weld pool ... 47 https://doi.org/10.15407/tpwj2015.06.11
- Bartenev I.A. Peculiarities of fire-cracker plate electrode arc surfacing over alloying charge ... 52 https://doi.org/10.15407/tpwj2015.06.12
- Grigorenko G.M., Adeeva L.I., Tunik A.Yu., Poleshchuk M.A., Zelenin E.V., Zelenin V.I., Nikityuk Yu.N. and Lukash V.A. Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds ... 55 https://doi.org/10.15407/tpwj2015.06.13
- Pulka Ch.V., Shably O.N., Baranovsky V.N., Senchishin V.S. and Gavrilyuk V.Ya. Ways of updating the technology of induction surfacing of thin steel discs ... 59 https://doi.org/10.15407/tpwj2015.06.14
SURFACING MATERIALS, DEPOSITED METAL. COMPOSITION, STRUCTURE, PROPERTIES
- Mazur A.A., Makovetskaya O.K., Pustovojt S.V. and Brovchenko N.S. Flux-cored wires at the world and regional markets of welding consumables (Review) ... 63 https://doi.org/10.15407/tpwj2015.06.15
- Shevchenko S.B., Krivtsun I.V., Golovko L.F., Lutaj A.N. and Slobodyanyuk V.P. Capabilities of laser radiation for improvement of electrode wire quality ... 70 https://doi.org/10.15407/tpwj2015.06.16
- Ryabtsev I.A., Panfilov A.I., Babinets A.A., Ryabtsev I.I., Gordan G.N. and Babijchuk I.L. Structure and abrasive wear resistance of deposited metal hardened with carbides of different types ... 78 https://doi.org/10.15407/tpwj2015.06.17
- Osin V.V. Flux-cored wires providing deposited metal with high resistance to adhesion wear ... 83 https://doi.org/10.15407/tpwj2015.06.18
- Lentyugov I.P. and Ryabtsev I.A. Structure and properties of metal deposited by flux-cored wire with charge of used metal-abrasive wastes ... 87 https://doi.org/10.15407/tpwj2015.06.19
- Yushchenko K.A., Kakhovsky Yu.N., Bulat A.V., Samojlenko V.I. and Kakhovsky N.Yu. New electrodes for repair surfacing of damaged lining of impeller chamber of HES hydropower units ... 90 https://doi.org/10.15407/tpwj2015.06.20
- Zhudra A.P., Voronchuk A.P., Fomakin A.A. and Veliky S.I. Materials and equipment for surfacing of metal hot cutting knives ... 93 https://doi.org/10.15407/tpwj2015.06.21
- Markashova L.I., Poznyakov V.D., Gajvoronsky A.A., Berdnikova E.N. and Alekseenko T.A. Structure and properties of railway wheel surface after restoration surfacing and service loading ... 96 https://doi.org/10.15407/tpwj2015.06.22
- Rosert R. Cobalt-based alloys for surfacing ... 101 https://doi.org/10.15407/tpwj2015.06.23
- Voronchuk A.P., Zhudra A.P., Kochura V.O., Petrov A.V. and Fedosenko V.V. Peculiarities of technology of manufacture and application of flux-cored strips for surfacing ... 107 https://doi.org/10.15407/tpwj2015.06.24
- Bely A.I., Zhudra A.P., Roslyakov A.I., Petrov V.V. and Loboda P.I. Effect of alloying on physicomechanical properties of fused tungsten carbides ... 112 https://doi.org/10.15407/tpwj2015.06.25
- Sukhovaya E.V. Double-layer surfacing compositions based on filling material of Cr—Ti—C alloying system ... 116 https://doi.org/10.15407/tpwj2015.06.26
- Kuskov Yu.M., Gordan G.N., Eremeeva L.T., Bogajchuk I.L. and Kajda T.V. Effect of magnetic-pulsed treatment of filler materials on deposited metal structure ... 121 https://doi.org/10.15407/tpwj2015.06.27
- Markashova L.I., Shelyagin V.D., Kushnaryova O.S. and Bernatsky A.V. Effect of technological parameters of laser and laser-plasma alloying on properties of 38KhN3MFA steel layers ... 124 https://doi.org/10.15407/tpwj2015.06.28
APPLICATION OF MATHEMATICAL METHODS IN INVESTIGATIONS OF SURFACING PROCESSES
- Senchenkov I.K., Ryabtsev I.A. and Turyk E. Structural scheme of procedure for calculation of stress-strain state of parts during surfacing and further service ... 130 https://doi.org/10.15407/tpwj2015.06.29
- Senchenkov I.K., Chervinko O.P. and Ryabtsev I.A. Calculation of fatigue life of cylindrical parts at multilayer surfacing and service cyclic thermomechanical loading ... 134 https://doi.org/10.15407/tpwj2015.06.30
- Gopkalo A.P. and Klipachevsky V.V. Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets ... 140 https://doi.org/10.15407/tpwj2015.06.31
- Kushchy A.M. and Vlasov A.F. Modeling of process of melting of electrodes with exothermal mixture in coating during repair welding and surfacing ... 142 https://doi.org/10.15407/tpwj2015.06.32