lobanov l.m.
Всього статей опубліковано в журналі«The Paton Welding Journal»: 86
- Lobanov L.M., Vasiliev Yu.S., Kuksin A.N. Effect of adhesive interlayer on formation of a contact area in spot welding of low-carbon steels 10 (2000, №03)
- Lobanov L.M., Pivtorak V.A., Kuvshinsky N.G. Diagnostics of structures of metallic, composite materials using holography, electron speckle-interferometry, shearography ... 72 (2000, №09)
- Lobanov L.M., Pivtorak V.A., Savitsky V.V., Olejnik E.M. Automatic computer analysis of holographic interferograms in non-destructive quality control of materials, elements of structures ... 6 (2002, №10)
- Lobanov L.M., Mikhoduj L.I. , Poznyakov V.D., Mikhoduj O.L., Vasiliev V.G., Strizhak P.A. Towards the problem of formation of longitudinal cracks in welded joints of high-strength steels ... 13 (2003, №04)
- Lobanov L.M., Mikhoduj L.I., Poznyakov V.D., Mikhoduj O.L., Kasatkin S.B., Sergienko A.A., Strizhak P.A. Method of evaluation of effect of residual stresses on formation of longitudinal cold cracks in alloy steel welded joints. 6 (2003, №06)
- Paton B.E., Lobanov L.M., Tsybulkin G.A., Makhnenko O.V., Pereverzev Yu.N. Automated thermal straightening of welded thin-sheet structures ... 2 (2003, №07)
- Lobanov L.M., Kyrian V.I., Shumitsky O.I. Fifty years of the E.O. Paton bridge .... 12 (2003, №10)
- Lobanov L.M., Poznyakov V.D., Mikhoduj O.L. Effect of residual stresses on technological strength of welded joints of high-strength steel 14KhGN2MDAFB .... 29 (2004, №08)
- Lobanov L.M., Korotynsky A.E., Yumatova V.I., Skopyuk M.I. Selection of methods for comprehensive assessment of welding equipment quality ... 36 (2004, №09)
- Lobanov L.M., Pivtorak V.A., Savitsky V.V., Tkachuk G.I., Kiyanets I.V. Express control of quality, stressed state of welded structures using methods of electron shearography, speckle-interferometry.... 35 (2005, №08)
- Lobanov L.M., Pashchin N.A., Loginov V.P., Loginova Yu.V. Application of electric pulse treatment of structural elements to extend their service life (Review) 19 (2005, №11)
- L.M. Lobanov, V.A. Pivtorak, V.V. Savitsky, G.I. Tkachuk Procedure for determination of residual stresses in welded joints and structural elements using electron speckle-interferometry (2006, №01)
- L.M. Lobanov, N.A. Pashchin, V.Yu. Skulsky, V.P. Loginov Influence of electrodynamic treatment on the stress-strain state of heat-resistant steels (2006, №05)
- B.E. Paton, L.M. Lobanov, V.N. Samilov, I.S. Pilishenko, O.V. Makhnenko, N.A. Pashchin, V.A. Gorinov, K.V. Shiyan Design and features of fabrication technology of a large-sized transformable shell structure (2006, №07)
- L.M. Lobanov, V.I. Kirian, V.V. Knysh, G.I. Prokopenko Improvement of fatigue resistance of welded joints in metal structures by high-frequency mechanical peening (Review) (2006, №09)
- L.M. Lobanov, N.A. Pashchin, V.P. Loginov, T.G. Taranova, V.A. Kostin, A.A. Chajka Influence of electrodynamic treatment on the features of fracture micromechanism of welded joints on aluminuim alloy AMg6 (2007, №02)
- L.M. Lobanov, N.A. Pashchin, V.P. Loginov, V.N. Smilenko Change of the stress-strain state of welded joints of aluminium alloy AMg6 after electrodynamic treatment (2007, №06)
- L.M. Lobanov, N.A. Pashchin, V.P. Loginov, V.N. Smilenko Effect of electrodynamic treatment on stressed state of welded joints on steel St3 (2007, №07)
- L.M. Lobanov, V.I. Makhnenko, N.A. Pashchin, V.P. Loginov Features of formation of plastic deformations at electrodynamic treatment of welded joints of St3 steel (2007, №10)
- L.M. Lobanov, A.N. Timoshenko, P.V. Goncharov, V.I. Zajtsev Technology of spot arc welding of three-layer steel panel with cellular filler (2008, №02)
- L.M. Lobanov, V.A. Pivtorak Diagnostics of structures using methods of electron shearography and speckle-interferometry (2008, №11)
- L.M. Lobanov, A.N. Timoshenko, P.V. Goncharov Arc spot welding of overlap joints in vertical position (2009, №01)
- L.M. Lobanov, L.D. Dobrushin, A.G. Bryzgalin, S.Yu. Illarionov, P.S. Shlensky, L.A. Volgin, V.G. Lashkevich, E.V. Grabar Widening of technological capabilities of explosion treatment for reducing residual stresses in welded joints on up to 5000 m3 decomposers (2009, №11)
- L.M. Lobanov, N.A. Pashchin, V.P. Loginov, A.G. Poklyatsky Effect of electric pulse treatment on residual change in shape of thin-sheet welded structures (Review) (2010, №03)
- B.E. Paton, L.M. Lobanov, A.Ya. Nedoseka, A.Yu. Fedchun, A.A. Yolkin, B.M. Obodovsky Reliability of welded structure operation. Assessment, control (2010, №05)
- L.M. Lobanov, N.A. Pashchin, V.P. Loginov, A.G. Poklyatsky, A.I. Babutsky Repair of ship hull structures of aluminium alloy amg6 using electrodynamic treatment (2010, №09)
- L.M. Lobanov, N.A. Pashchin, V.P. Loginov, O.L. Mikhoduj Influence of repeated loading on the efficiency of electrodynamic treatment of aluminium alloy AMg6, its welded joints (2011, №04)
- L.M. Lobanov, V.A. Pivtorak, E.M. Savitskaya, I.V. Kiyanets, V.V. Lysak Nondestructive testing of welded joints in-process quality control of welded panels of alloy vt20 using method of electron shearography (2011, №11)
- B.E. Paton, L.M. Lobanov, V.S. Volkov Transformable structures (Review) (2011, №12)
- L.M. Lobanov, N.A. Pashchin, A.V. Cherkashin, O.L. Mikhoduj, I.P. Kondratenko Efficiency of electrodynamic treatment of aluminium alloy amg6, its welded joints (2012, №01)
- L.M. Lobanov, S.Yu. Illarionov, L.D. Dobrushin, N.A. Pashchin, V.V. Tisenkov, S.V. Bondarev, S.A. Gavrilov, N.A. Sergienko, A.V. Kutishenko Repair explosion cladding of threaded channel of car axles (2012, №02)
- L.M. Lobanov, N.A. Pashchin, O.L. Mikhoduj Efficiency of electrodynamic treatment of welded joints of amg6 alloy of different thickness (2012, №03)
- L.M. Lobanov, V.A. Lebedev, S.Yu. Maksimov, A.N. Timoshenko, P.V. Goncharov, I.V. Lendel, R.I. Klochko New capabilities of mechanized arc spot welding using pulse effects (2012, №05)
- L.M. Lobanov, V.S. Volkov Development of the technology of manufacturing double-wall welded transformable-shell structure (2012, №10)
- L.M. Lobanov, N.A. Pashchin, A.V. Cherkashin, G.I. Tkachuk, V.V. Savitsky, O.L. Mikhoduj, K.V. Shiyan, V.K. Levchuk, V.V. Zhyginas, A.P. Lyashchenko Repair welding of intermediate cases of aircraft engines from high-temperature magnesium alloy ml10 with application of electrodynamic treatment (2012, №11)
- L.M. Lobanov, N.A. Pashchin, O.L. Mikhoduj, A.V. Cherkashin, A.N. Manchenko, I.P. Kondratenko, A.V. Zhiltsov Effectiveness of various variants of electrodynamic treatment of AMg6 ALLOY, ITS WELDED JOINTS (2012, №12)
- L.M. Lobanov, V.D. Poznyakov, O.V. Makhnenko Formation of cold cracks in welded joints from high-strength steels with 350-850 mpa yield strength (2013, №07)
- L.M. Lobanov, N.A. Pashchin, A.N. Timoshenko, O.L. Mikhoduj, P.V. Goncharov Effect of preliminary deforming, electrodynamic treatment on stressed state of circumferential welded joints of AMg6 alloy (2013, №08)
- L.M. Lobanov, N.A. Pashchin, O.L. Mikhoduj Electrodynamic straightening of elements of sheet welded structures (2013, №09)
- L.M. Lobanov, V.I. Kyrian The E.O. Paton all-welded bridge is sixty years old (2013, №12)
- L.M. Lobanov, E.F. Garf, L.N. Kopylov, A.G. Sineok Welded structure of Kiev TV-tower is 40 years old (2014, №01)
- B.E. Paton, L.M. Lobanov, V.V. Lysak, V.V. Knysh, V.I. Pavlovsky, V.P. Prilutsky, A.N. Timoshenko, P.V. Goncharov, Guan Qiao Deformation-free welding of stringer panels of titanium alloy VT20 (2014, №09)
- L.M. Lobanov, O.V. Makhnenko, G.Yu. Saprykina, A.D. Pustovoj Fatigue calculation for welded joints of bearing elements of freight car bogie (2014, №10)
- L.M. Lobanov, N.A. Pashchin, O.L. Mikhoduj, T.G. Solomijchuk Limination of local deformations of buckling type by means of electrodynamic treatment (2014, №11)
- L.M. Lobanov, V.S. Volkov Peculiarities in manufacture of thin-walled welded transformable-volume structures for space application (2015, №01)
- L.M. Lobanov, N.M. Makhlin, V.K. Smolyakov, V.E. Vodolazsky, V.E. Popov, A.A. Sviridenko Equipment for preparation of pipe ends to welding of position butt joints of pipeline (2015, №09)
- L.M. Lobanov, N.A. Pashchin, O.L. Mikhoduj, A.V. Cherkashin, A.V. Zarutsky, I.P. Kondratenko Application of electrodynamic treatment with amplitude-frequency control of current pulses for life extension of aircraft structures of light alloys (2016, №07)
- L.M. Lobanov, I.P. Kondratenko, N.A. Pashchin, O.L. Mikhoduj, A.V. Cherkashin Comparison of influence of pulsed effects of magnetic, electric fields on stressed state of welded joints of aluminium alloy AMG6 (2016, №10)
- L.M. Lobanov, E.V. Shapovalov, P.V. Goncharov, V.V. Dolinenko, A.N. Timoshenko, T.G. Skuba Technology of robotic TIG welding of structure elements of stainless steels (2017, №06)
- L.M. Lobanov, N.A. Pashchin Development of technology, equipment for reduction of residual stresses, straightening in welded structures applying electrodynamic treatment (2017, №08)
- L.M. Lobanov, N.M. Makhlin, A.E. Korotynsky, V.Yu. Buryak, A.G. Siparenko Resistometric method of welding speed measurement for simulating welding systems (2018, №01)
- L.M. Lobanov, N.M. Makhlin, A.E. Korotynsky, V.E. Vodolazsky, V.Yu. Buryak Modern hardware-software complexes for training of welders (2018, №05)
- L.M. Lobanov, V.S. Volkov Thin-walled welded transformable-volume structures of space purpose (2018, №12)
- L.M. Lobanov, N.M. Makhlin, V.E. Vodolazsky, V.E. Popov, L.P. Mutsenko New equipment for preparation of position butts of NPP pipelines for welding (2019, №03)
- L.M. Lobanov, N.A. Pashchin, A.N. Timoshenko, O.L. Mikhoduj, P.V. Goncharov, A.V. Cherkashin Influence of parameters of electrodynamic treatment on residual stresses of welded joints of alloy AMg6 (2019, №04)
- L.M. Lobanov, M.O. Pashchin, O.V. Cherkashyn, O.L. Mikhodui, I.P. Kondratenko, O.M. Sizonenko Prospects for application of electromagnetic fields in welding, related processes (2019, №08)
- L.M. Lobanov, E.A. Asnis, N.V. Piskun, E.L. Vrzhizhevsky, A.S. Milenin, E.A. Velikoivanenko Investigation of stress-strain state of welded joints of the system TiAl intermetallics (2019, №11)
- L.M. Lobanov, N.M. Makhlin, V.E. VOdolazsky, V.E. Popov, D.S. Oliyanenko Modernization of heads of automatic welding machines for orbital tig-welding of pipelines of NPP power units (2019, №12)
- L.M. Lobanov, O.V. Makhnenko, V.V. Knysh, S.A. Solovej, V.I. Pavlovskyi Development of welded structure of side frame of freight car bogie of increased reliability (2020, №03)
- L.M. Lobanov, M.O. Pashchyn, O.M. Tymoshenko, P.V. Goncharov, O.L. Mikhodui, K.V. Shiyan Increase in the life of welded joints of AMg6 aluminum alloy (2020, №04)
- L.M. Lobanov, N.M. Makhlin, V.Ye. Popov, D.S. Oliyanenko, O.V. Kovalyuk Automatic arc welding in manufacture and renovation repair of pipe elements of spirals of high-pressure heaters of NPP power units (2020, №05)
- L.M. Lobanov, E.A. Asnis, N.V. Piskun, E.L. Vrzhyzhevskyi, L.M. Radchenko Effect of local heat treatment on mechanical properties of welded joints of intermetallic of tial system produced by electron beam welding (2020, №09)
- L.M. Lobanov, M.O. Pashchin, O.L. Mikhodui, O.V. Cherkashin, O.M. Timoshenko, I.P. Kondratenko, T.G. Solomiichuk Influence of pulsed electromagnetic field treatment on stress-strain state of circumferential welded joints of aluminium АМg6 alloy (2020, №10)
- L.M. Lobanov, O.M. Syzonenko, V.V. Holovko, P. Tashev, Ye.V. Lypian, M.S. Prystash, A.S. Torpakov, M.O. Pashchin, O.L. Mikhodui, V.O. Shcheretskyi Pulsed-disharge treatment of the Al–Ti–C system modifier (2021, №05)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mikhodui, P.V. Goncharov, Yu.M. Sydorenko, P.R. Ustymenko Modeling of stress-strain states of AMg6 alloy due to impact action of electrode-indenter in electrodynamic treatment (2021, №06)
- L.M. Lobanov, V.V. Savytskyi, I.V. Kyianets, O.P. Shutkevich, K.V. Shyian Non-destructive testing of elements of titanium honeycomb panels by shearography method using vacuum load (2021, №12)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mikhodui, P.V. Goncharov, A.V. Zavdoveev, P.R. Ustymenko Electrodynamic treatment of welded joints of aluminium AMg6 alloy in the process of heating the weld metal (2022, №04)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mikhodui, A.A. Hryniuk, E.V. Illyashenko, P.V. Goncharov, V.V. Savytskyi, Yu.M. Sydorenko, P.R. Ustymenko Calculated evaluation of stress-strain states of welded joints of aluminium AMg61 alloy under the action of electrodynamic treatment of weld metal in the process of fusion welding (2022, №07)
- L.M. Lobanov, V.M. Korzhik, M.O. Pashchin, O.L. Mikhodui, A.A. Grynyuk, E.V. Illyashenko, P.V. Goncharov, P.R. Ustymenko Deformation-free TIG welding of AMg6 alloy with application of electrodynamic treatment of weld metal (2022, №08)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mykhoduj, A.A. Hryniuk, P.V. Honcharov, A.O. Alyoshyn, T.G. Solomiychuk, Yu.M. Sydorenko, P.R. Ustymenko, Yuhui Yao Influence of electrode shape on stressed-strained state of AMg6 alloy during its electrodynamic treatment (2022, №09)
- L.M. Lobanov, O.M. Berdnikova, M.O. Pashchyn, O.L. Mykhoduj, O.S. Kushnaryova, T.G. Solomiychuk, V.I. Kryvyi Strengthening of welded structures of 25KHGNMT steel by pulsed barrier discharge treatment (2022, №12)
- L.M. Lobanov, O.M. Syzonenko, I.O. Ryabtsev, M.O. Pashchyn, A.A. Babinets, I.P. Lentyugov, A.S. Torpakov, O.L. Mikhoduj, T.G. Solomiichuk Improvement of technology of producing Ti-TiC modifiers and studying their impact on the structure of deposited metal of type 25Kh5FMS (2023, №02)
- L.M. Lobanov, V.M. Korzhyk, M.O. Pashchyn, O.L. Mikhoduj, P.R. Ustymenko, Zhang Yupeng, A.O. Alyoshin, O.M. Voitenko Mathematical modeling of the impact of electrodynamic treatment in the process of additive surfacing on the stress-strained state of volumetric products from aluminium-magnesium alloy (2023, №07)
- L.M. Lobanov, V.V. Knysh, M.O. Pashchin, V.G. Kot, O.L. Mikhodui, Ye.D. Pekar, Luyi Huang, A.O. Alyoshyn Nondestructive evaluation of residual stresses in welded joints on the base of a combination of ultrasonic testing and speckle-interferometry (2023, №07)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mikhodui Modern technologies of electrophysical treatment for regulation of stress-strain states of elements of welded structures (2023, №08)
- L.M. Lobanov, D.I. Stelmakh, V.V. Savitsky, V.P. Diadin, O.P. Shutkevych, A.G. Kozachek Remote assessment of damages of the Kyiv TV tower based on the use of aerial photography and the method of photogrammetry (2023, №08)
- L.M. Lobanov, V.V. Savitsky, O.P. Shutkevych, K.V. Shyan, I.V. Kyanets Nondestructive method of residual stress determination in welded joints based on application of high-density current pulses and speckle-interferometry (2024, №01)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mikhoduj, N.L. Todorovych, Yu.M. Sydorenko, P.R. Ustymenko Computational evaluation of the influence of the thickness of welded joints of AMg6 alloy on their stress-strain state after electrodynamic treatment in the process of welding (2024, №04)
- L.M. Lobanov, O.P. Shutkevych, I.V. Kyyanets, I.L. Shkurat, K.V. Shyyan, V.V. Savitsky Detection of internal ultra-small defects in aluminium welded joints by the shearography method (2025, №02)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mikhodui, A.N. Timoshenko, K.V. Shyian, O.M. Karlov, I.P. Kondratenko, R.S. Kryshchuk, V.V. Chopyk Magnetic pulse treatment of welded joints in fusion welding (2025, №04)
- L.M. Lobanov, I.L. Shkurat, D.I. Stelmakh, O.P. Shutkevych, V.V. Savitsky Enhancing large-scale structure diagnostics through uav-based data and neural network analysis (2025, №07)
- L.M. Lobanov, M.O. Pashchyn, O.L. Mikhodui, O.M. Tymoshenko Electrodynamic treatment for the control of residual stresses in welded joints made of light, heat-resistant alloys and austenitic steel (2025, №08)
- L.M. Lobanov, O.V. Makhnenko, O.S. Milenin, O.A. Velykoivanenko, G.P. Rozynka, N.R. Basystuk, G.Yu. Saprykina Computer software for modeling a circumferential welded joint (2025, №08)
- L.M. Lobanov, L.I. Nyrkova, M.O. Pashchyn, O.L. Mikhodui, O.M. Tymoshenko, N.L. Todorovych, O.M. Syzonenko, I.P. Kondratenko, V.V. Chopyk, O.M. Karlov Research into technological processes of treatment of metals, alloys and welded joints using electromagnetic field (Review) (2025, №11)
- L.M. Lobanov, V.V. Lysak, O.L. Mikhodui, O.M. Timoshenko, M.O. Pashchyn, I.P. Kondratenko, V.V. Chopyk, O.M. Karlov Residual welding stresses in the AMg6 alloy after electrodynamic treatment under conditions of preliminary elastic tension (2026, №03)
- L.M. Lobanov, O.V. Makhnenko, O.S. Milenin, O.A. Velykoivanenko, G.P. Rozynka, N.R. Basystyuk, G.Yu. Saprykina Computer program for modelling stress-strain state of a circumferential welded joint (2026, №04)
Науково-практичні семінари:
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)
2026.03.05
НОВІ КНИГИ
2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України
2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2026 рік.
2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)
2026.03.05
НОВІ КНИГИ
2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України
2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2026 рік.
2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”