1. Видавничий дім

Видавничий дім "Патон", №Golovko

golovko v.v.

Всього статей опубліковано в журналі«The Paton Welding Journal»: 45

  1. Golovko V.V. Modelling of composition of non-metallic inclusions in weld metal of high-strength low-alloyed steels (2001, №05)
  2. Grigorenko G.M., Grabin V.F., Golovko V.V., Kostin V.A., Alekseenko I.I., Kapitanchuk L.M. Procedure of determination of sizes of ultradispersed non-metallic inclusions in metal of low-alloy steel welds (2003, №04)
  3. Golovko V.V. Application of agglomerated fluxes for welding of low-alloy steels (Review) (2003, №06)
  4. Grabin V.F., Golovko V.V., Solomijchuk T.G., Goncharenko E.I., Kostin V.A. Analysis of structural state of weld metal produced by using welding wires of the ferritic-pearlitic grade (2003, №08)
  5. Grigorenko G.M., Golovko V.V., Grabin V.F., Kostin V.A. Effect of metallurgical characteristics of flux on structure, phase composition of high-strength weld metal (2004, №03)
  6. Grigorenko G.M., Kostin V.A., Golovko V.V., Grabin V.F. Effect of chemical inhomogeneity on the formation of acicular ferrite in high-strength weld metal (2004, №04)
  7. Grabin V.F., Golovko V.V., Kostin V.A., Alekseenko I.I. Morphological peculiarities of microstructure of weld metal from low-alloy steels with ultralow content of carbon (2004, №07)
  8. G.M. Grigorenko, V.V. Golovko, V.A. Kostin, V.F. Grabin Effect of microstructural factors on sensitivity of welds with ultra-low carbon content to brittle fracture (2005, №02)
  9. V.V. Golovko Methods to lower the hydrogen content in metal of welded joints of low-alloyed steels in submerged-arc welding (2006, №02)
  10. V.V. Golovko Influence of oxygen potential of welding fluxes on solid solution alloying in weld metal (2006, №10)
  11. V.F. Grabin, V.V. Golovko Effect of distribution of manganese in structural components on properties of low-alloy weld metal (2007, №12)
  12. V.V. Golovko, V.F. Grabin Effect of alloying of high-strength weld metal with titanium on its structure and properties (2008, №01)
  13. V.V. Golovko, V.L. Galinich, I.A. Goncharov, N.Ya. Osipov, V.L. Netyaga, N.N. Olejnik Agglomerated fluxes — new products of OJSC «Zaporozhstekloflyus» (2008, №10)
  14. V.V. Golovko, I.A. Goncharov Method for evaluation of fracture resistance of welding flux granules (2009, №07)
  15. V.V. Golovko, V.A. Kostin, G.M. Grigorenko Peculiarities of the influence of complex alloying on structure formation, mechanical properties of welds on low-alloyed high-strength steels (2011, №07)
  16. V.A. Kostin, V.V. Golovko, G.M. Grigorenko methods for assessment of strengthening of HSLA steel weld metal (2011, №10)
  17. V.V. Golovko Agglomerated fluxes in local welding production (Review) (2012, №02)
  18. V.V. Golovko, I.K. Pokhodnya Effect of non-metallic inclusions on formation of structure of the weld metal in high-strength low-alloy steels (2013, №06)
  19. D.Yu. Ermolenko, V.V. Golovko Numerical modeling, prediction of weld microstructure in high-strength steel welding (Review) (2014, №03)
  20. V.V. Golovko, S.N. Stepanyuk, D.Yu. Ermolenko Role of welding flux in formation of weld metal during arc welding of high-strength low-alloy steels (2014, №06)
  21. V.V. Golovko, S.N. Stepanyuk, D.Yu. Ermolenko Effect of titanium-containing inoculants on structure, properties of weld metal of high-strength low-alloy steels (2015, №02)
  22. V.V. Golovko, L.A. Taraborkin Modelling of chemical composition of weld pool metal in arc methods of welding (2016, №01)
  23. V.V. Golovko, L.I. Markashova, O.S. Kushnaryova, V.V. Zhukov Strengthening phases, structure, properties of low-alloy steel modified welds (2016, №07)
  24. D.Yu. Ermolenko, A.V. Ignatenko, V.V. Golovko Direct numerical Modelling of formation of weld metal dendrite structure with disperse refractory inoculants (2016, №12)
  25. D.Yu. Ermolenko, V.V. Golovko Computation, experimental evaluation of formation of primary structure in weld metal with refractory inoculants (2017, №01)
  26. L.A. Taraborkin, V.V. Golovko Calculation model of formation of nonmetallic inclusions of multilayer morphology in weld metal (2018, №02)
  27. V.V. Golovko Possibilities of nanomodification of dendrite structure of weld metal (2018, №08)
  28. V.V. Golovko, S.N. Stepanyuk, D.Yu. Ermolenko Dispersion modification of dendrite structure of weld metal (2019, №06)
  29. V.V. Holovko, D.Yu. Yermolenko, S.M. Stepanyuk The influence of introducing refractory compounds into the weld pool on the weld metal dendritic structure (2020, №06)
  30. V.V. Holovko, D.Yu. Yermolenko, S.M. Stepanyuk, V.V. Zhukov, V.A. Kostin Influence of introduction of refractory particles into welding pool on structure and properties of weld metal (2020, №08)
  31. V.V. Holovko The nature of nonmetallic inclusion distribution in the weld metal structural components at arc welding methods (2020, №11)
  32. L.M. Lobanov, O.M. Syzonenko, V.V. Holovko, P. Tashev, Ye.V. Lypian, M.S. Prystash, A.S. Torpakov, M.O. Pashchin, O.L. Mikhodui, V.O. Shcheretskyi Pulsed-disharge treatment of the Al–Ti–C system modifier (2021, №05)
  33. V.A. Kostin, V.V. Zhukov, O.M. Berdnikova, V.V. Holovko, O.S. Kushnaryova Effect of modification of weld metal of high-strength low-alloy steels on their structure and properties (2021, №05)
  34. O.O. Shtofel, V.V. Holovko, T.G. Chyzhska Application of fractal and metallographic analyses for evaluation of quality of weld metal (2021, №05)
  35. O.M. Korduban, V.V. Trachevskyi, T.V. Kryshchuk, I.R. Yavdoshchyn, V.V. Holovko Investigation of the presence of Mn4+ in welding aerosols using rfs method (2021, №06)
  36. L.A. Taraborkin, V.V. Holovko Calculated-experimental model of distribution of non-metallic inclusions in the metal of welds by sizes (2021, №12)
  37. V.V. Holovko Influence of inoculants on the features of weld structure formation in low-alloyed steels (Review) (2022, №09)
  38. V.V. Holovko Features of the influence of grain boundaries during δ-γ-transformation on the formation of welds metal structure (Review) (2022, №11)
  39. V.V. Holovko, O.O. Shtofel, D.Yu. Korolenko Influence of the nature of distribution of non-metallic inclusions on the mechanical properties of weld metal of low-alloy steels (2023, №03)
  40. V.V. Holovko, O.O. Shtofel, V.A. Kostin Fractal evaluation of grain boundaries branching in the structure of weld metal of low-alloy steels (2023, №06)
  41. I.O. Goncharov, V.V. Holovko, A.P. Paltsevych, A.M. Duchenko Technologies for producing low-hydrogen fused fluxes (2023, №07)
  42. I.O. Goncharov, V.V. Holovko, A.P. Paltsevych, A.M. Duchenko Improvement of the technology of manufacturing low-hydrogen agglomerated fluxes using fused materials (2023, №09)
  43. V.V. Holovko, V.A. Kostin, V.V. Zhukov Dispersed oxides influence on the kinetics of the weld metal structural transformations (2025, №06)
  44. V.V. Holovko, O.O. Shtofel, D.Yu. Korolenko Use of the hough transformation method for the metallographic studies of ferritic-bainitic steels microstructure (2025, №11)
  45. V.V. Holovko, O.O. Shtofel Possibilities of fractal analysis methods for welded metal microstructure metallographic research (Review) (2026, №03)
Науково-практичні семінари:
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)
2026.03.05
НОВІ КНИГИ
2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України
2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2026 рік.
2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”

Найсвіжіші номери журналів на сайті

 Автоматичне зварювання #03 (2026), The Paton Welding Journal #04 (2026), Сучасна електрометалургія #02 (2026), Технічна діагностика та неруйнівний контроль #01 (2026),