Видавничий дім "Патон", №Makhnenko

mahnenko o.v.

Всього статей опубліковано в журналі«The Paton Welding Journal»: 53

1. Makhnenko V.I., Velikoivanenko E.A., Makhnenko O.V., Rozynka G.F., Pivtorak N.I. Investigation of effect of phase transformations on residual stresses in circumferential welding of pipes 2 (2000, №05)
2. Makhnenko V.I., Makhnenko O.V. Development of calculation procedures for assessment of allowable defects in welded joints of critical structures ... 79 (2000, №09)
3. Makhnenko V.I., Velikoivanenko E.A., Makhnenko O.V., Rozynka G.F., Pivtorak N.I., Seyffarth P., Bautzmann K. Computer program "Welding of tubes to tube sheets of heat exchangers" ... 2 (2002, №08)
4. Paton B.E., Lobanov L.M., Tsybulkin G.A., Makhnenko O.V., Pereverzev Yu.N. Automated thermal straightening of welded thin-sheet structures ... 2 (2003, №07)
5. V.I. Makhnenko, E.F. Garf, S.T. Rimsky, V.I. Galinich, O.V. Makhnenko, P.S. Yukhimets, V.M. Bubnov, E.K. Tusikov, P.A. Varenchuk Welded freight bogie bolster project (2006, №04)
6. B.E. Paton, L.M. Lobanov, V.N. Samilov, I.S. Pilishenko, O.V. Makhnenko, N.A. Pashchin, V.A. Gorinov, K.V. Shiyan Design and features of fabrication technology of a large-sized transformable shell structure (2006, №07)
7. V.I. Makhnenko, O.V. Makhnenko, O.Ya. Zinchenko Investigation of performance of welded joints in steam generators PGV-1000M by leak tests (2007, №04)
8. O.V. Makhnenko, V.I. Makhnenko Prediction of fatigue life of welded assemblies in bridge arched pillars (2007, №05)
9. O.V. Makhnenko, E.A. Velikoivanenko, N.I. Pivtorak Numerical study of risk of lamellar cracks formation in welding of shells of manholes into body of 75,000 m3 reservoir (2007, №08)
10. O.V. Makhnenko, A.F. Muzhichenko Mathematical modelling of thermal straightening of cylindrical shells and shafts with distortions along their longitudinal axis (2007, №09)
11. O.V. Makhnenko, P. Seyffarth Calculation prediction of overall distortions in laser welded beams (2008, №03)
12. O.V. Makhnenko Increase of efficiency of thermal straightening of welded thin-sheet structures on basis of mathematical modeling (2008, №09)
13. O.V. Makhnenko, A.F. Muzhichenko, P. Seyffarth Application of mathematical modelling in thermal straightening of shipbuilding panels (2009, №01)
14. V.I. Makhnenko, V.D. Poznyakov, E.A. Velikoivanenko, O.V. Makhnenko, G.F. Rozynka, N.I. Pivtorak Risk of cold cracking in welding of structural high-strength steels (2009, №12)
15. O.V. Makhnenko, A.N. Timoshenko, A.F. Muzhichenko, P.V. Goncharov Improvement of the technology for arc spot welding of overlap joints based on the results of mathematical modelling (2010, №11)
16. V.I. Makhnenko, O.V. Makhnenko, S.S. Kozlitina, L.I. Dzyubak Welded structures from austenitic steel of 10kh18n10t type under conditions of radiation-induced swelling (2012, №02)
17. V.I. Makhnenko, L.I. Markashova, O.V. Makhnenko, E.N. Berdnikova, V.M. Shekera, A.S. Zubchenko Growth of corrosion cracks in structural steel 10GN2MFA (2012, №08)
18. O.V. Makhnenko, I.V. Mirzov Investigation of stress-strain state of welded structures from austenitic steel at radioactive irradiation (2013, №01)
19. O.V. Makhnenko, A.F. Muzhichenko, I.I. Prudky Mathematical modelling of stress-strain state of welded stringer panels from titanium alloy VT20 (2013, №02)
20. V.I. Makhnenko, O.V. Makhnenko, E.A. Velikoivanenko, G.F. Rozynka, N.I. Pivtorak Indices of pore formation in heat treatment of welded assemblies from steels susceptible to tempering cracking (2013, №03)
21. O.V. Makhnenko, I.I. Prudky Information systems for selection of arc welding process parameters (Review) (2013, №04)
22. L.M. Lobanov, V.D. Poznyakov, O.V. Makhnenko Formation of cold cracks in welded joints from high-strength steels with 350-850 mpa yield strength (2013, №07)
23. O.V. Makhnenko, G.Yu. Saprykina, I.V. Mirzov, A.D. Pustovoj Prospects for development of load-carrying elements of freight car bogie (2014, №03)
24. L.M. Lobanov, O.V. Makhnenko, G.Yu. Saprykina, A.D. Pustovoj Fatigue calculation for welded joints of bearing elements of freight car bogie (2014, №10)
25. O.V. Makhnenko, E.A. Velikoivanenko, I.V. Mirzov Redistribution of residual welding stresses in in-vessel core barrel of WWER-1000 reactor during operation (2014, №11)
26. O.V. Makhnenko, A.S. Milenin, G.Yu. Saprykina Evaluation of operability of WWR-M reactor primary circuit piping with welded joint defects (2015, №01)
27. O.V. Makhnenko, I.V. Mirzov, V.B. Porokhonko Modelling of residual stresses, radiation swelling, stressed state of in-service WWER-1000 reactor baffle (2016, №04)
28. O.V. Makhnenko, A.S. Milenin, E.A. Velikoivanenko, N.I. Pivtorak, D.V. Kovalchuk Modelling of temperature fields, stress-strain state of small 3D sample in its layer-by-layer forming (2017, №03)
29. V.M. Nesterenkov, Yu.V. Orsa, K.S. Khripko, O.V. Makhnenko Technology for EBW of aircraft structures of titanium alloys (2018, №08)
30. O.V. Makhnenko, V.A. Kostin, V.V. Zhukov, E.S. Kostenevich Effect of cooling cycle of welding on structure-phase composition of 15Kh2NMFA steel (2019, №09)
31. L.M. Lobanov, O.V. Makhnenko, V.V. Knysh, S.A. Solovej, V.I. Pavlovskyi Development of welded structure of side frame of freight car bogie of increased reliability (2020, №03)
32. O.V. Makhnenko, O.S. Kostenevych Impact of technological parameters of arc deposition of an anticorrosion layer in the vessel of WWER-1000 reactor on residual stress distribution (2020, №12)
33. O.V. Makhnenko, O.S. Milenin, O.A. Velykoivanenko, G.P. Rozynka, S.S. Kozlitina, N.I. Pivtorak, L.I. Dzyubak Prediction of the kinetics of temperature fields and stress-strain state of dissimilar products, manufactured by layer-by-layer forming (2021, №01)
34. O.V. Makhnenko, O.S. Milenin, O.A. Velykoivanenko, G.P. Rozynka, N.I. Pivtorak Numerical analysis of the features of limiting state of welded pipeline elements under ultra-low-cycle loading conditions (2021, №01)
35. S.V. Egorova, O.V. Makhnenko, G.Yu. Saprykina, D.P. Syneok Mathematical models of the dependence of mechanical properties on chemical composition of steels for ESW (2021, №01)
36. O.V. Makhnenko, S.M. Kandala, N.R. Basystyuk, M.V. Cherkashin Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment (2021, №03)
37. A.A. Makarenko, O.V. Makhnenko Mathematical modeling of residual stresses in composite welded joints of WWER-1000 reactor vessel cover with CSS nozzles (2022, №01)
38. O.O. Makhnenko, O.V. Makhnenko Calculated estimation of load-carrying capacity of the main span beams of the E.O. Paton bridge across the Dnipro in Kyiv by nondestructive testing results (2022, №02)
39. O.V. Makhnenko, S.M. Kandala Evaluation of brittle fracture resistance of WWER-1000 reactor enclosure during long-term service, taking into account the residual technological stresses (2022, №08)
40. B.R. Tsaryk, O.F. Muzhichenko, O.V. Makhnenko Mathematical model of determination of residual stresses and strains in friction stir welding of aluminium alloy (2022, №09)
41. O.V. Makhnenko, S.M. Kandala Influence of residual process stresses on brittle fracture resistance of WWER-1000 reactor baffle in case of an emergency (2023, №01)
42. A.A. Makarenko, O.V. Makhnenko Mathematical modeling of residual stresses in a composite welded joint of the collector adapter sleeve to the branch pipe of ZPM-440 steam generator (2023, №03)
43. O.V. Makhnenko, O.S. Milenin, O.F. Muzhychenko, S.M. Kandala, O.M. Savytska, G.Yu. Saprykina Mathematical modeling of residual stress relaxation during performance of postweld heat treatment (2023, №06)
44. O.V. Makhnenko, G.Yu. Saprykina, O.M. Savytska, M.S. Ananchenko Reconditioning repair of steam turbine blades using additive technology (2023, №11)
45. G.V. Vorona, O.V. Makhnenko, O.S. Milenin Effectiveness of unloading a section of NPS pipeline with a pipe wall thinning defect by mounting a band or welded sleeve (2024, №02)
46. B.R. Tsaryk, O.V. Makhnenko Mathematical modelling of distortions at welding of large vessels of aluminium alloy (2024, №08)
47. G.V. Vorona, O.S. Kostenevych, O.S. Milenin, O.V. Makhnenko Reinforcement of an NPP pipeline with a wall thinning defect by applying external weld overlay (2024, №09)
48. O.V. Makhnenko, O.S. Milenin, V.I. Pavlovsky, V.V. Savitsky, B.R. Tsaryk Residual stresses induced by friction stir welding of heat strengthened aluminium 2219-T81 alloy plates (2024, №12)
49. O.V. Makhnenko, O.S. Kostenevich, G.Yu. Saprykina, O.G. Bogachenko, I.O. Goncharov, I.O. Neilo Mathematical modelling of the processes of component diffusion in the core‒graphite electrode system in an industrial arc steelmaking DC furnace of the DSP PS-12 type (2025, №01)
50. L.M. Lobanov, O.V. Makhnenko, O.S. Milenin, O.A. Velykoivanenko, G.P. Rozynka, N.R. Basystuk, G.Yu. Saprykina Computer software for modeling a circumferential welded joint (2025, №08)
51. O.O. Makhnenko, O.S. Kostenevych, O.V. Makhnenko Mathematical modelling of thermal processes in friction stir welding of light alloys based on magnesium (2025, №09)
52. O.V. Makhnenko, O.F. Muzhychenko, I.I. Prudkiy, N.R. Basistyuk Residual stresses in the joint of the collector to the Dn1200 nozzle of the PGV-1000 steam generator due to local heat treatment (2025, №11)
53. L.M. Lobanov, O.V. Makhnenko, O.S. Milenin, O.A. Velykoivanenko, G.P. Rozynka, N.R. Basystyuk, G.Yu. Saprykina Computer program for modelling stress-strain state of a circumferential welded joint (2026, №04)

Науково-практичні семінари:
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)

---

2026.03.05
НОВІ КНИГИ

---

2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!

---

2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.

---

2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України

---

2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану

---

Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2026 рік.

---

2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”

---