1. Видавничий дім

Видавничий дім "Патон", №Poklyatsky

poklyatskiy a.g.

Всього статей опубліковано в журналі«The Paton Welding Journal»: 49

  1. A.Ya. Ishchenko, V.P. Budnik, A.G. Poklyatsky, A.A. Grinyuk Effect of composition of shielding gases on technological characteristics of arc during non-consumable electrode welding of aluminium alloys (2000, №02)
  2. A.V. Lozovskaya, A.A. Chajka, A.A. Bondarev, A.G. Poklyatsky, Andr.A. Bondarev Softening of high-strength aluminium alloys in different fusion welding processes (2001, №03)
  3. V.A. Shonin, A.G. Poklyatsky Low-cycle fatigue of welded butt joints made from alloy AMg6 in inert atmosphere (2001, №03)
  4. A.G. Poklyatsky Peculiarities of formation of macroinclusions of oxide film in weld metal of aluminium alloys (Review) (2001, №03)
  5. T.M. Labur, Andr.A. Bondarev, A.V. Lozovskaya, V.S. Mashin, A.G. Poklyatsky Influence of welding process on fracture resistance of joints in aluminium-lithium alloys 1420 and 1460 (2001, №07)
  6. A.G. Poklyatsky, A.A. Grinyuk Effect of parameters of asymmetric and modulated currents on quality of aluminium alloy welded joints (2001, №07)
  7. Ishchenko A.Ya., Lozovskaya A.V., Poklyatsky A.G., Sklabinskaya I.E., Mashin V.S., Yavorskaya M.R. Increase in strength of welds in arc welding of alloy 1420 using the Sc-containing fillers (2002, №01)
  8. Poklyatsky A.G., Ishchenko A.Ya., Grinyuk A.A., Chajka A.A., Fedorchuk V.E. Non-consumable electrode argon-arc welding of aluminium alloys with arc oscillations (2002, №02)
  9. A.G. Poklyatsky, A.V. Lozovskaya, A.A. Grinyuk Prevention of formation of oxide films in welds on Li-containing aluminium alloys (2002, №12)
  10. V.S. Mashin, A.G. Poklyatsky, V.E. Fedorchuk Mechanical properties of aluminuim alloys in consumable and nonconsumable electrode arc welding (2005, №09)
  11. A.G. Poklyatsky, A.V. Lozovskaya, A.A. Grinyuk, M.R. Yavorskaya, A.A. Chajka Improvement of weld strength in arc welding of al-cu alloys with application of sc-containing fillers (2006, №02)
  12. T.M. Labur, A.A. Grinyuk, A.G. Poklyatsky Mechanical properties of plasma welded joints on aluminium-lithium aloys (2006, №06)
  13. T.M. Labur, A.G. Poklyatsky, A.A. Grinyuk Improvement of fracture resistance of joints of alloy 1420 produced by nonconsumable-electrode argon-arc welding with forced oscillations of the weld pool (2007, №01)
  14. A.Ya. Ishchenko, V.E. Fedorchuk, A.G. Poklyatsky, M.R. Yavorskaya Hot cracking resistance of Al–Zn–Mg–Cu system alloys in argon-arc welding (2007, №02)
  15. A.G. Poklyatsky, A.Ya. Ishchenko, A.A. Grinyuk, M.R. Yavorskaya Mechanical properties of 1441 aluminium alloy joints produces by different welding processes (2007, №03)
  16. T.M. Labur, A.A. Grinyuk, T.G. Taranova, V.A. Kostin, A.G. Poklyatsky Features of micromechanism of fracture in joints of aluminium-lithium alloys produced by plasma welding (2007, №09)
  17. A.G. Poklyatsky, A.Ya. Ishchenko, M.R. Yavorskaya Strength of joints on sheet aluminuim alloys produced by friction stir welding (2007, №09)
  18. A.Ya. Ishchenko, S.V. Podielnikov, A.G. Poklyatsky Friction stir welding of aluminium alloys (Review) (2007, №11)
  19. A.G. Poklyatsky Characteristic defects in FSW of sheet aluminium alloys and main causes for their formation (2008, №06)
  20. A.G. Poklyatsky Influence of oxide film macroinclusions on the strength of welds in plate joints of AMg6 alloy (2008, №09)
  21. A.G. Poklyatsky, A.Ya. Ishchenko, S.V. Podielnikov Influence of friction stir welding process parameters on weld formation in welded joints of aluminium alloys 1.8-2.5 mm thick (2008, №10)
  22. A.G. Poklyatsky, A.A. Chajka, I.N. Klochkov, M.R. Yavorskaya Strength and structure of aluminium alloy welded joints made by friction stir and non-consumable electrode welding (2009, №09)
  23. L.M. Lobanov, N.A. Pashchin, V.P. Loginov, A.G. Poklyatsky Effect of electric pulse treatment on residual change in shape of thin-sheet welded structures (Review) (2010, №03)
  24. A.A. Poklyatsky, A.Ya. Ishchenko, A.A. Chajka, T.M. Labur Friction stir welding as an effective method to improve structure performance (2010, №04)
  25. L.M. Lobanov, N.A. Pashchin, V.P. Loginov, A.G. Poklyatsky, A.I. Babutsky Repair of ship hull structures of aluminium alloy AMg6 using electrodynamic treatment (2010, №09)
  26. A.G. Poklyatsky, A.A. Chajka, I.N. Klochkov, M.R. Yavorskaya friction stir welding of aluminum alloys of different alloying systems (2010, №10)
  27. A.G. Poklyatsky Studying the features of mass transfer in the process of friction stir welding using physical modelling (2011, №06)
  28. A.G. Poklyatsky, A.Ya. Ishchenko, V.E. Fedorchuk Friction stir welding of composite, granulated and quasicrystalline aluminium alloys (2011, №07)
  29. A.G. Poklyatsky Peculiarities of temperature distribution in thin-sheet aluminium alloy AMg5M in friction stir welding (2011, №08)
  30. A.G. Poklyatsky Resistance of welds on thin-sheet aluminium alloys to initiation and propagation of service cracks (2011, №10)
  31. L.I. Markashova, A.G. Poklyatsky, O.S. Kushnaryova Influence of welding processes on the structure and mechanical properties of welded joints of aluminuim alloy 1460 (2013, №03)
  32. A.G. Poklyatsky, I.N. Klochkov, S.I. Motrunich Some advantages of butt joints of thin wrought aluminium alloys AMg5M and AMg6M produced by FSW, compared to TIG-welded joints (2015, №07)
  33. L.I. Markashova, A.G. Poklyatsky, O.S. Kushnaryova Effect of structure and properties of aluminium-lithium alloy welded joints produced by argon-arc, friction stir welding methods (2016, №06)
  34. A.G. Poklyatsky, V.V. Knysh, I.N. Klochkov, S.I. Motrunich Features and advantages of the process of friction stir welding of butt joints of sheet aluminium-lithium alloys (2016, №06)
  35. A.G. Poklyatsky, S.I. Motrunich, I.N. Klochkov Physico-mechanical properties of thin-sheet aluminum alloy D16 butt joints produced by friction stir welding (2017, №04)
  36. A.O. Lukyanenko, T.M. Labur, A.G. Poklyatsky, V.A. Kuleshov, R.Baich. Darko Sanitary-hygienic characteristic of the process of nonconsumable electrode argon-arс welding of 1201 and 1460 aluminium alloys (2017, №10)
  37. A.G. Poklyatsky, Yu.V. Golovatyuk, T.M. Labur, O.P. Ostash, S.I. Motrunich Characteristics of structural strength of D16T alloy welded joints, produced by friction stir welding (2018, №09)
  38. A.G. Poklyatsky, S.I. Motrunich Strength of welded joints of heat-hardenable aluminium alloys in TIG, friction stir welding (2019, №02)
  39. V.E. Fedorchuk, A.G. Poklyatsky, Yu.V. Falchenko, G.P. Kislaya Scandium effect on the properties and structure of alloys of Al–Zn–Mg–Cu system, their welded joints (2019, №06)
  40. A.G. Poklyatskii Prediction of parameters of friction stir welding process of sheet aluminium alloys (2019, №08)
  41. A.G. Poklyatsky, V.E. Fedorchuk, S.L. Motrunich, Yu.V. Falchenko, G.P. Kisla Influence of scandium on mechanical properties of welded joints of d16 alloy produced using filler wires of different alloying systems (2020, №02)
  42. V.V. Knysh, I.M. Klochkov, S.I. Motrunich, A.G. Poklyatskyi Influence of irregular cyclic load on fatigue resistance of thin-sheet welded joints of heat-strengthened aluminium alloys (2021, №01)
  43. A.G. Poklyatskyi, S.I. Motrunich, O.S. Kushnaryova Properties of butt joints of fine-sheet aluminium-lithium 1460 alloy, produced by friction stir and tig welding (2021, №07)
  44. A.G. Poklyatskyi, S.I. Motrunich, I.M. Klochkov, T.M. Labur Some advantages of welded joints of aluminium 1201 alloy produced by friction stir welding (2021, №09)
  45. A.G. Poklyatskyi, S.I. Motrunich, V.E. Fedorchuk, I.M. Klochkov Strength and structure of butt, overlap and fillet joints of AMg6M alloy produced by friction stir welding (2023, №02)
  46. A.G. Poklyatskyi, S.I. Motrunich, V.Ye. Fedorchuk, Iu.V. Falchenko, M. Sagul Mechanical properties and structural features of butt joints produced at FSW of aluminium alloys of different alloying systems (2023, №04)
  47. A.G. Poklyatskyi, V.E. Fedorchuk, S.I. Motrunich, Yu.V. Falchenko, M. Sahul Strength and structure of MA2-1M magnesium alloy butt joints produced by argon arc welding with a non-consumable electrode and by friction with stirring (2024, №02)
  48. M.A. Khokhlov, O.O. Makhnenko, V.A. Kostin, A.G. Pokliatskyi, Iu.V. Falchenko, Yu.A. Khokhlova Thermo-mechanical processes in friction stir welding of magnesium alloy sheets (2024, №05)
  49. T.M. Labur, A.G. Poklyatskyi, V.A. Koval Consumable and nonconsumable electrode welding of high-strength 2219-T31 aluminium alloy (2024, №05)
2026.07.07
На сайті викладені у відкритий доступ 6 книг. Дивіться в розділі КНИГИ
2026.06.29 Згідно з Наказом Міністерства освіти і науки України, № 928 від 11 червня 2026 р. наукові періодичні видання «Автоматичне зварювання», «Сучасна електрометалургія», «Технічна діагностика та неруйнівний контроль» включено до переліку наукових фахових видань України у межах відповідних кластерів з 01 червня 2026 р. по 31 травня 2029 р. з присвоєнням категорії «Б».
Науково-практичні семінари:
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)
2026.03.05
НОВІ КНИГИ
2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України
2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2027 рік.
2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”

Поточний номер

Автоматичне зварювання #03 (2026), The Paton Welding Journal #07 (2026), Сучасна електрометалургія #02 (2026), Технічна діагностика та неруйнівний контроль #02 (2026),