yushchenko k.a.
Всього статей опубліковано в журналі«The Paton Welding Journal»: 79
- Yushchenko K.A., Chekotilo L.V., Kakhovsky Yu.N., Gordonny V.G., Kiriakov V.M., Klapatyuk A.V., Leibenzon V.A., Krendelyov V.N., Knokhin V.G., Kalashnik S.B., Brigidin V.Ya. Setting up commercial production of the Sv-08Kh20N9G7T welding wire at Dneprospetsstal (2000, №03)
- K.A. Yushchenko, T.M. Starushchenko, V.A. Pestov Ferritic filler metal for welding cold-resistant nickel steels (2001, №02)
- A.V. Zvyagintseva, K.A. Yushchenko, V.S. Savchenko Effect of structural changes in high-temperature heating on ductile characteristics of nickel alloys (2001, №04)
- K.A. Yushchenko, D.V. Kovalenko, I.V. Kovalenko Application of activators for TIG welding of steels and alloys (2001, №07)
- N.O. Chervyakov, K.A. Yushchenko Method for investigation of longitudinal residual stresses in bead on nickel alloy plate welding (2002, №08)
- Yushchenko K.A., Monko G.G., Starushchenko T.M., Belorusets B.O., Naumov A.S. Field welding of large-size spherical isothermal tanks for storage of cryogenic products (2002, №09)
- B.A. Zadery, S.S. Kotenko, A.E. Marinchenko, E.P. Polishchuk, K.A. Yushchenko Formation of crystallographic texture in the metal of welded joints on molybdenum alloys (2002, №11)
- K.A. Yushchenko, L.V. Chekotilo, A.K. Tsaryuk, V.D. Ivanenko, T.M. Starushchenko, A.V. Kuzhel, Yu.A. Lysov, N.V. Kravchenko, V.I. Ulianov, V.A. Gordienko New documents for manufacture and repair of power generation equipment (2003, №01)
- B.A. Zadery, S.S. Kotenko, E.P. Polishchuk, K.A. Yushchenko, O.M. Barabash, O.P. Karasevskaya Peculiarities of crystalline structure of welded joints in single crystals (2003, №05)
- K.A. Yushchenko, T.M. Starushchenko, A.A. Nakonechny, L.V. Chervyakova, T.E. Shepil, V.A. Kachanov, Yu.B. Danilov Investigation of corrosion fracture of welded joints in Ni-Cr-Mo alloys in titania production environment (2003, №06)
- Yushchenko K.A., Kakhovsky Yu.N., Fadeeva G.V., Samojlenko V.I., Bulat A.V. Electrodes of the ANV series for welding high-alloy steels and alloys (2003, №09)
- B.A. Zadery, S.S. Kotenko, A.E. Marinchenko, E.P. Polishchuk, K.A. Yushchenko Effect of annealing temperature on mechanical properties of molybdenum alloy and its welded joints (2004, №06)
- K.A. Yushchenko, V.S. Savchenko, A.V. Zvyagintseva Effect of heat treatment, degree of alloying on structural changes in nickel alloys (2004, №07)
- K.A. Yushchenko, V.S. Savchenko, N.O. Chervyakov, A.V. Zvyagintseva Character of formation of hot cracks in welding cast heat-resistant nickel alloys (2004, №08)
- K.A. Yushchenko Weldability and advanced processes for materials welding (2004, №09)
- S.G. Krasilnikov, V.P. Gulida, K.A. Yushchenko, I.I. Lychko Cooperation between NKMZ and PWI in the field of electroslag welding for heavy engineering applications (2004, №09)
- K.A. Yushchenko, V.S. Savchenko, T.M. Starushchenko Role of segregation of oxygen in welding of Invar type alloys (2004, №12)
- K.A. Yushchenko, V.V. Derlomenko Analysis of modern views on weldability (2005, №01)
- P.P. Kalina, A.V. Yarovitsyn, K.A. Yushchenko Peculiarities of the microplasma powder cladding process (2005, №04)
- K.A. Yushchenko, V.S. Savchenko, L.V. Chervyakova, A.V. Zvyagintseva High-temperature gas corrosion of nickel alloy turbine blades during operation (2005, №05)
- K.A. Yushchenko, V.S. Savchenko, L.V. Chervyakova, S. David, J. Vitek Investigation of weldability of nickel superalloys and development of repair technology for gas turbine blades (2005, №06)
- K.A. Yushchenko, V.V. Derlomenko Materials weldability criteria (2005, №08)
- K.A. Yushchenko, O.P. Karasevskaya, S.S. Kotenko, E.P. Polishchuk, V.S. Savchenko, B.A. Zadery Inheritance of structure-oriented state of metallic materials by welded joints (2005, №09)
- K.A. Yushchenko, N.O. Chervyakov, P.P. Kalina Energy characteristics of low-amperage arcs (2006, №04)
- B.E. Paton, K.A. Yushchenko, D.V. Kovalenko, I.V. Krivtsun, V.F. Demchenko, I.V. Kovalenko Role of keyhole in formation of deep penetration in a-tig welding of stainless steel (2006, №06)
- K.A. Yushchenko, B.A. Zadery, S.S. Kotenko, E.P. Polishchuk, O.P. Karasevskaya Structure of welded joints in tungsten single crystals (2006, №08)
- K.A. Yushchenko, B.A. Zadery, A.V. Zvyagintseva, T.N. Kushnaryova, V.S. Nesmikh, E.P. Polishchuk, V.S. Savchenko Application of nano-structured materials for diffusion bonding of heat-resistant nickel alloys (2006, №11)
- B.E. Paton, K.A. Yushchenko, I.I. Lychko, V.D. Kovalyov, S.I. Veliky, S.I. Pritula, A.D. Chepurnoj, S.P. Nikitchenko, A.N. Shalashny Equipment, procedures and technology for electroslag welding of position circumferential butt joints (2007, №07)
- K.A. Yushchenko, G.G. Monko, D.V. Kovalenko, V.A. Pestov Automatic argon-arc welding for sealing cartridges with waste nuclear fuel (2007, №08)
- K.A. Yushchenko, L.V. Chekotilo, G.F. Nastenko, Yu.B. Danilov, V.A. Kachanov, A.I. Kabashny, S.N. Ivanuna, V.R. Dorn, V.V. Ilienko, N.V. Ambrozyak, B.P. Kisly, T.M. Khodan Extension of life of large-size concentrated sulphuric acid storage tanks (2007, №09)
- K.A. Yushchenko, O.G. Levchenko, A.V. Bulat, O.N. Bezushko, V.I. Samojlenko, V.V. Misechko Sanitary and hygienic characteristics of covered electrodes for welding high-alloy steels (2007, №12)
- K.A. Yushchenko, B.A. Zadery, A.V. Zvyagintseva, S.S. Kotenko, E.P. Polishchuk, V.S. Savchenko, I.S. Gakh, O.P. Karasevskaya Sensitivity to cracking and structural changes in ebw of single crystals of heat-resistant nickel alloys (2008, №02)
- K.A. Yushchenko, V.S. Savchenko, L.V. Chervyakova, V.I. Izbash, V.G. Solyanik Analysis of the causes of fracture of blades in axial-flow compressor of unit GTK-25I (2008, №07)
- K.A. Yushchenko, A.V. Yarovitsyn, A.V. Zvyagintseva Properties of microplasma powder welded joints on heat-resistant nickel alloys (2008, №09)
- K.A. Yushchenko, B.A. Zadery, V.S. Savchenko, A.V. Zvyagintseva, I.S. Gakh, O.P. Karasevskaya Welding and cladding of heat-resistant nickel alloys with single-crystal structure (2008, №11)
- A.V. Yarovitsyn, K.A. Yushchenko, A.A. Nakonechny, L.A. Petrik Peculiarities of low-amperage argon-arc and microplasma powder cladding on narrow substrate (2009, №06)
- K.A. Yushchenko, A.V. Bulat, O.G. Levchenko, O.N. Bezushko, V.I. Samojlenko, D.I. Dovgal, N.Yu. Kakhovsky Effect of composition of base metal and electrode covering on hygienic properties of welding fumes (2009, №07)
- K.A. Yushchenko, B.A. Zadery, A.V. Zvyagintseva, V.S. Savchenko, I.S. Gakh, O.P. Karasevskaya peculiarities of structure of metal deposited on edges of single-crystal blades made from nickel superalloys (2009, №08)
- K.A. Yushchenko, V.S. Savchenko, N.O. Chervyakov, A.V. Zvyagintseva Probable mechanism of cracking of stable-austenitic welds caused by oxygen segregation (2010, №05)
- K.A. Yushchenko, V.S. Savchenko, A.V. Yarovitsyn, A.A. Nakonechny, G.F. Nastenko, V.E. Zamkovoj, O.S. Belozertsev, N.V., Rejchenko Development of the technology for repair microplasma powder cladding of flange platform faces of aircraft engine high-pressure turbine blades (2010, №08)
- V.V. Derlomenko, K.A. Yushchenko, V.S. Savchenko, N.O. Chervyakov Technological strength and analysis of causes of weldability deterioration and cracking (2010, №09)
- K.A. Yushchenko, A.I. Ustinov, B.A. Zadery, V.S. Savchenko, T.V. Melnichenko, V.V. Kurenkova, A.V. Zvyagintseva, I.S. Gakh Effect of nanofoil of the Ni-NbC system on structure of electron beam welds in heat-resistant alloys (2010, №11)
- K.A. Yushchenko, V.S. Savchenko, N.O. Chervyakov, A.V. Zvyagintseva, G.G. Monko, V.A. Pestov Comparative evaluation of sensitivity of welded joints on alloy Inconel 690 to hot cracking (2011, №11)
- K.A. Yushchenko, Yu.S. Borisov, S.G. Vojnarovich, A.N. Kislitsa, E.K. Kuzmich-Yanchuk Two-layer bio-cermet titanium-hydroxyapatite coating (2011, №12)
- A.I. Voloshin, K.P. Shapovalov, V.A. Belinsky, S.N. Litvinenko, K.A. Yushchenko, I.I. Lychko, S.M. Kozulin Method for manufacture of large-sized forged-cast billets using electroslag welding (2012, №05)
- K.A. Yushchenko, I.I. Lychko, S.M. Kozulin, A.A. Fomakin, V.A. Dakal, E.S. Oganisyan Portable apparatus for consumable-nozzle electroslag welding (2012, №08)
- K.A. Yushchenko, V.A. Romanova, R.R. Balokhonov, V.S. Savchenko, N.O. Chervyakov, A.V. Zvyagintseva Experimental study and modelling of thermal-deformation processes occurring in welded joints on nickel superalloys (2012, №10)
- K.A. Yushchenko, I.S. Gakh, B.A. Zadery, A.V. Zvyagintseva, O.P. Karasevskaya Influence of weld pool geometry on structure of metal of welds on high-temperature nickel alloy single crystals (2013, №05)
- B.E. Paton, I.I. Lychko, K.A. Yushchenko, S.A. Suprun, S.M. Kozulin, A.A. Klimenko Melting of electrode, base metal in electroslag welding (2013, №07)
- K.A. Yushchenko, A.V. Yarovitsyn, D.B. Yakovchuk, A.A. Fomakin, V.E. Mazurak Some techniques for reducing filler powder losses in microplasma cladding (2013, №09)
- S.N. Litvinenko, K.P. Shapovalov, I.S. Savchenko, S.N. Kosinov, K.A. Yushchenko, I.I. Lychko, S.M. Kozulin SYstems of process control, monitoring of conditions - the important factors of quality assurance in electroslag welding of thick metal (2013, №12)
- K.A. Yushchenko, V.S. Savchenko, N.O. Chervyakov, A.V. Zvyagintseva, G.G. Monko, V.A. Pestov Investigation of cracking susceptibility of austenitic material using PVR-test procedure (2014, №06)
- K.A. Yushchenko, A.V. Yarovitsyn influence of active gas content and disperse filler continuity on the process of bead formation in microplasma powder surfacing of nickel superalloys (2014, №06)
- K.A. Yushchenko, A.V. Bulat, N.Yu. Kakhovsky, V.I. Samojlenko, S.Yu. Maksimov, S.G. Grigorenko Investigation of composition and structure of weld metal of Kh20N9G2B type made in wet underwater welding (2014, №06)
- K.A. Yushchenko, Yu.N. Kakhovsky, A.V. Bulat, R.I. Morozova, A.V. Zvyagintseva, V.I. Samojlenko, Yu.V. Olejnik Investigation of transition zone of low-carbon steel joint with high-alloyed Cr-Ni deposited metal (2014, №06)
- K.A. Yushchenko, S.M. Kozulin, I.I. Lychko, M.G. Kozulin Joining of thick metal by multipass electroslag welding (2014, №09)
- K.A. Yushchenko, Yu.N. Kakhovsky, A.V. Bulat, V.I. Samojlenko, N.Yu. Kakhovsky New electrodes for repair surfacing of damaged lining of impeller chamber of hes hydropower units (2015, №06)
- K.A. Yushchenko, A.V. Yarovitsyn, G.D. Khrushchov, A.A. Fomakin, Yu.V. Olejnik Analysis of process of bead shaping in cladding on narrow substrate (2015, №09)
- K.P. Shapovalov, V.A. Belinsky, S.N. Kosinov, S.N. Litvinenko, K.A. Yushchenko, I.I. Lychko, S.M. Kozulin Manufacturing large-sized beds by consumable-nozzle electroslag welding (2015, №09)
- K.A. Yushchenko, L.I. Markashova, A.V. Zvyagintseva, Yu.A. Khokhlova, O.S. Kushnaryova, N.O. Chervyakov Microstructural features of multilayer welds with different hot cracking sensitivity (2016, №02)
- K.A. Yushchenko, A.V. Yarovitsyn, N.O. Chervyakov Dependencies of discrete-additive formation of microvolumes of metal being solidified in multi-layer microplasma powder surfacing of nickel alloys (2016, №06)
- K.A. Yushchenko, B.A. Zadery, I.S. Gakh, O.P. Karasevskaya Formation of weld metal structure in electron beam welding of single crystals of high-temperature nickel alloys (2016, №08)
- K.P. Shapovalov, V.A. Belinsky, A.E. Merzlyakov, S.N. Kosinov, K.A. Yushchenko, I.I. Lychko, S.M. Kozulin Electroslag welding of large-sized press frame (2016, №08)
- K.A. Yushchenko, E.A. Velikoivanenko, N.O. Chervyakov, G.F. Rosynka, N.I. Pivtorak Effect of anisotropy of properties of nickel alloy on stresses and plastic deformations in weld zone (2016, №10)
- K.A. Yushchenko, E.A. Velikoivanenko, N.O. Chervyakov, G.F. Rozynka, N.I. Pivtorak Finite-element modelling of stress-strain state in weldability tests (PVR-TEST) (2016, №12)
- K.A. Yushchenko, A.V. Bulat, N.V. Skorina, A.E. Marchenko, V.I. Samojlenko, N.Yu. Kakhovsky Effect of binder type on manufacturability and properties of E-08Kh20N9G2B type coated electrodes (2017, №01)
- K.A. Yushchenko, A.V. Yarovitsyn, N.O. Chervyakov Effect of energy parameters of microplasma powder surfacing modes on susceptibility of nickel alloy ZhS32 to crack formation (2017, №02)
- K.A. Yushchenko, A.V. Mats, I.M. Neklyudov, V.I. Sokolenko, N.A. Chernyak Effect of alternating magnetic field on magnetic properties, structure and stressed state of vessel steel welded joints (2017, №04)
- K.A. Yushchenko, B.A. Zadery, I.S. Gakh, A.V. Zvyagintseva, L.M. Kapitanchuk, V.Yu. Khaskin Evolution of structure of oxide dispersion strengthened nickel alloys in fusion welding (2018, №06)
- K.A. Yushchenko, I.I. Lychko, S.M. Kozulin, A.A. Fomakin, I.S. Nesena Application of electroslag welding in construction (2018, №09)
- K.A. Yushchenko, B.A. Zadery, I.S. Gakh, A.V. Zvyagintseva Prospects of development of welded single-crystal structures of heat-temperature nickel alloys (2018, №12)
- I.I. Lychko, K.A. Yushchenko, S.A. Suprun, S.M. Kozulin Peculiarities of electrode, base metal melting in electroslag welding (2019, №03)
- K.A. Yushchenko, I.S. Gakh, B.A. Zadery, A.V. Zvyagintseva, O.P. Karasevskaya Repair surfacing of gas turbine engine blades from high-temperature nickel alloys with surface defects and damage (2019, №06)
- K.A. Yushchenko, A.V. Yarovitsyn, N.O. Chervyakov, A.V. Zvyagintseva, I.R. Volosatov, G.D. Khrushchov Evaluation of short-term mechanical properties of a joint of difficult-to-weld nickel high-temperature alloys of ZhS6 type (2019, №07)
- B.E. Paton, K.A. Yushchenko, S.M. Kozulin, I.I. Lychko Electroslag welding process. Analysis of the state and tendencies of development (Review) (2019, №10)
- K.A. Yushchenko, O.V. Bulat, G.V. Svyagintseva, V.I. Samoilenko, Yu.M. Kakhovskyi Investigation of the methods of modifying the structure of austenitic welds and the zone of their fusion with pearlitic base metal (2020, №08)
- K.A. Yushchenko, O.V. Yarovitsyn, O.O. Nakonechnyi, I.R. Volosatov, O.O. Fomakin, G.D. Khrushchov Development of the technology of reconditioning the sealing element of nozzle blade sector from difficult-to-weld high-temperature nickel alloy of ZhS6 type by microplasma powder surfacing (2020, №11)
- K.A. Yushchenko, B.O. Zaderii, I.S. Gakh, G.V. Zviagintseva Welding dissimilar high-strength nickel alloys in poly- and single-crystal combinations (2021, №06)
- K.A. Yushchenko, B.O. Zaderii, I.S. Gakh, G.V. Zviagintseva, T.O. Aleksiienko Destruction of welded joints of single-crystal high-temperature nickel alloys at tensile testing (2022, №02)
2026.07.07
На сайті викладені у відкритий доступ 6 книг. Дивіться в розділі КНИГИ
2026.06.29 Згідно з Наказом Міністерства освіти і науки України, № 928 від 11 червня 2026 р. наукові періодичні видання «Автоматичне зварювання», «Сучасна електрометалургія», «Технічна діагностика та неруйнівний контроль» включено до переліку наукових фахових видань України у межах відповідних кластерів з 01 червня 2026 р. по 31 травня 2029 р. з присвоєнням категорії «Б».
Науково-практичні семінари:
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)
2026.03.05
НОВІ КНИГИ
2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України
2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2027 рік.
2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”
На сайті викладені у відкритий доступ 6 книг. Дивіться в розділі КНИГИ
2026.06.29 Згідно з Наказом Міністерства освіти і науки України, № 928 від 11 червня 2026 р. наукові періодичні видання «Автоматичне зварювання», «Сучасна електрометалургія», «Технічна діагностика та неруйнівний контроль» включено до переліку наукових фахових видань України у межах відповідних кластерів з 01 червня 2026 р. по 31 травня 2029 р. з присвоєнням категорії «Б».
Науково-практичні семінари:
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)
2026.03.05
НОВІ КНИГИ
2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України
2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2027 рік.
2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”