1. Видавничий дім
  2. Журнали

Журнали, №Falchenko

falchenko yu.v.

Всього статей опубліковано в журналі«The Paton Welding Journal»: 42

  1. Kuchuk-Yatsenko S.I., KHARCHENKO G.K., FALCHENKO Yu.V., TARANOVA T.G. and GRIGORENKO S.G. FEATURES OF FERRITE BAND FORMATION IN VACUUM PRESSURE WELDING OF STEEL 10 (2000, №06)
  2. Kuchuk-Yatsenko S.I., Kharchenko G.K., Grigorenko G.M., Falchenko Yu.V., Taranova T.G., Gritskiv Ya.P., Zagadarchuk V.F. and Grigorenko S.G. Heterogeneity of pipe steel joints made by flash butt welding. 2 (2002, №02)
  3. Kharchenko G.K., Falchenko Yu.V., Novomlinets O.A. and Gorban V.F. Vacuum diffusion bonding of chromium to copper... 36 (2002, №07)
  4. Kharchenko G.K., Falchenko Yu.V., Arsenyuk V.V. and Polovetsky E.V. Vacuum percussion welding of aluminium to copper. 46 (2002, №09)
  5. Ryabov V.R., Muravejnik A.N., Kharchenko G.K. and Falchenko Yu.V. Specifics of formation of structure of joints, made from dispersion-strengthened composite Al + 4 % C, in diffusion bonding. 6 (2003, №12)
  6. Kuchuk-Yatsenko S.I., Kharchenko G.K., Zagadarchuk V.F., Falchenko Yu.V. and Mazanko V.F. Formation of structure of joints in resistance and flash-butt welding. 13 (2004, №02)
  7. Kharchenko G.K., Ishchenko A.Ya., Falchenko Yu.V., Muravejnik A.N. and Gordan G.N. Pressure welding of AMg5/23 % SiC composite ... 20 (2007, №06)
  8. Ishchenko A.Ya., Falchenko Yu.V., Ustinov A.I., Movchan B.A., Kharchenko G.K., Muravejnik A.N., Melnichenko T.V. and Rudenko A.E. Diffusion welding of finely-dispersed AMg5/27 % Al2O3 composite with application of nanolayered Ni/Al foil ... 2 (2007, №07)
  9. A.I. USTINOV, Yu.V. FALCHENKO, A.Ya. ISHCHENKO, G.K. KHARCHENKO, T.V. MELNICHENKO, A.N. MURAVEJNIK PRODUCING PERMANENT JOINTS OF g-TiAl BASED ALLOYS USING NANOLAYERED Ti/Al INTERLAYER BY VACUUM DIFFUSION WELDING (2009, №01)
  10. V.F. GORBAN, G.K. KHARCHENKO, Yu.V. FALCHENKO, L.V. PETRUSHINETS INVESTIGATION OF JOINTS OF TITANIUM ALUMINIDE WITH TITANIUM ALLOY VT8 PRODUCED BY DIFFUSION WELDING (2009, №12)
  11. Yu.V. FALCHENKO, A.N. MURAVEJNIK, G.K. KHARCHENKO, V.E. FEDORCHUK, G.N. GORDAN PRESSURE WELDING OF MICRO-DISPERSED COMPOSITE MATERIAL AMg5 + 27 % Al2O3 WITH APPLICATION OF RAPIDLY SOLIDIFIED INTERLAYER OF EUTECTIC ALLOY Al + 33 % Cu (2010, №02)
  12. S.I. Kuchuk-Yatsenko, G.K. KHARCHENKO, O.D. SMIYAN, Yu.V. FALCHENKO, V.F. ZAGADARCHUK, E.I. BUTKOVA HYDROGEN DISTRIBUTION IN FLASH-BUTT WELDED JOINTS ON STEEL 10G2FB (2010, №05)
  13. G.K. KHARCHENKO, A.I. USTINOV, Yu.V. FALCHENKO, A.N. MURAVEJNIK, T.V. MELNICHENKO, L.V. PETRUSHINETS DIFFUSION BONDING OF g-TiAl BASE ALLOY IN VACUUM BY USING NANOLAYERED INTERLAYERS (2011, №03)
  14. E.A. VELIKOIVANENKO, A.I. USTINOV, G.K. KHARCHENKO, Yu.V. FALCHENKO, L.V. PETRUSHINETS, G.F. ROZYNKA FORCE EFFECT ON WELDED SURFACES INITIATED BY RUNNING OF SHS REACTION IN NANOLAYERED INTERLAYER (2011, №07)
  15. G.K. KHARCHENKO, Yu.V. FALCHENKO, V.E. FEDORCHUK, S.G. GRIGORENKO, M.M. RUDENKO MANUFACTURE OF STAINLESS STEEL-ALUMINUM TRANSITION PIECES BY VACUUM PRESSURE WELDING METHOD (2012, №01)
  16. G.K. KHARCHENKO, A.I. USTINOV, Yu.V. FALCHENKO, L.V. PETRUSHINETS, S.G. GRIGORENKO, V.A. KOSTIN, V.P. GURIENKO VACUUM DIFFUSION WELDING OF g-TiAl INTERMETALLIC ALLOY TO 12Kh18N10T STEEL (2012, №04)
  17. Yu.V. FALCHENKO, E.V. POLOVETSKY, L.M. KAPITANCHUK DISTRIBUTION OF CHEMICAL ELEMENTS IN THE ZONE OF ALUMINIUM ALLOY AMg6 TO TITANIUM ALLOY VT6 JOINTS PRODUCED BY DIFFUSION WELDING IN VACUUM (2013, №06)
  18. V.E. FEDORCHUK, O.S. KUSHNARYOVA, T.A. ALEKSEENKO, Yu.V. FALCHENKO Peculiarities of alloying of weld metal of high-strength aluminium alloy welded joints with scandium (2014, №05)
  19. V.G. Tikhy, V.V. Gusev, A.M. Potapov, E.I. Shevtsov, I.A. Gusarova, T.A. Manko, Yu.V. Falchenko Thermal protection tile structures of shuttlecraft with different external load-carrying elements (2015, №04)
  20. A.I. Ustinov, Yu.V. Falchenko, T.V. Melnichenko, L.V. Petrushinets, K.V. Lyapina, A.E. Shishkin Vacuum diffusion welding of stainless steel through porous nickel interlayers (2015, №07)
  21. A.I. Ustinov, Yu.V. Falchenko, T.V. Melnichenko, L.V. Petrushinets, K.V. Lyapina, A.E. Shishkin, V.P. Gurienko Diffusion welding of steel to tin bronze through porous interlayers of nickel and copper (2015, №09)
  22. I.A. Gusarova, M. Parko, A.M. Potapov, Yu.V. Falchenko, L.V. Petrushinets, T.V. Melnichenko, V.E. Fedorchuk Evaluation of high temperature resistance of three-layer honeycomb panel produced from YuIPM-1200 alloy by vacuum diffusion welding (2016, №12)
  23. Yu.V. Falchenko, M.A. Khokhlov, Yu.A. Khokhlova, V.S. Sinyuk Formation of diffusion zone in welded joints of porous aluminium alloy with monolithic magnesium alloy at chemical activation by gallium (2017, №02)
  24. I.A. Gusarova, A.M. Potapov, T.A. Manko, Yu.V. Falchenko, A.I. Ustinov, L.V. Petrushinets, T.V. Melnichenko Vacuum diffusion welding of foil from powder nickel-chromium alloy (2017, №03)
  25. Yu.V. Falchenko, L.V. Petrushinets, V.E. Fedorchuk Influence of temperature of heating in vacuum on behaviour of oxide film on the surface of g-tial intermetallic alloy (2017, №04)
  26. Yu.V. Falchenko, L.V. Petrushinets Modern methods of manufacturing three-layer panels of aluminium alloys (Review) (2018, №06)
  27. L.V. Petrushinets, Yu.V. Falchenko, V.E. Fedorchuk, V.S. Shinkarenko Possibilities of manufacturing three-layer welded honeycomb panels from aluminium alloys (2018, №07)
  28. V.E. Fedorchuk, A.G. Poklyatsky, Yu.V. Falchenko, G.P. Kislaya Scandium effect on the properties and structure of alloys of Al–Zn–Mg–Cu system and their welded joints (2019, №06)
  29. Iu.V. Falchenko, L.V. Petrushynets, T.V. Melnichenko, A.I. Ustinov, V.E. Fedorchuk Vacuum diffusion welding of γ-TiAl intermetallic with high-temperature nickel alloy with application of intermediate Al/Ni nanolayers (2019, №10)
  30. N.V. Piskun, Yu.V. Falchenko, L.V. Petrushinets, A.I. Ustinov, T.V. Melnichenko, I.I. Statkevich Formation of the structure and mechanical properties of joints of tialnb intermetallic alloy in diffusion welding (2020, №02)
  31. A.G. Poklyatsky, V.E. Fedorchuk, S.L. Motrunich, Yu.V. Falchenko, G.P. Kisla Influence of scandium on mechanical properties of welded joints of d16 alloy produced using filler wires of different alloying systems (2020, №02)
  32. Ju.V. Falchenko, L.V. Petrushynets, E.V. Polovetskii Peculiarities of producing layered metal composite materials on aluminium base (2020, №04)
  33. Iu.V. Falchenko, L.V. Petrushynets, Ye.V. Polovetskyi Peculiarities of producing Al–Ti bimetal sheet joints by the method of vacuum diffusion welding (2020, №08)
  34. Iu.V. Falchenko, L.V. Petrushynets, V.Ye. Fedorchuk, Ye.V. Polovetskyi Investigation of heat treatment impact on the strength of Al–Ti bimetal honeycomb core (2021, №04)
  35. Yu.V. Falchenko, L.V. Petrushynets Modern technological methods of pressure welding of magnesium alloys (Review) (2022, №06)
  36. L.V. Petrushinets, Yu.V. Falchenko, O.O. Novomlynets, V.E. Fedorchuk Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels (2022, №07)
  37. A.G. Poklyatskyi, S.I. Motrunich, V.Ye. Fedorchuk, Iu.V. Falchenko, M. Sagul Mechanical properties and structural features of butt joints produced at FSW of aluminium alloys of different alloying systems (2023, №04)
  38. V.A. Kostin, Yu.V. Falchenko, A.L. Puzrin, A.O. Makhnenko Production, properties and prospects of application of modern magnesium alloys (2023, №04)
  39. A.I. Ustinov, Iu.V. Falchenko, S.O. Demchenkov, L.V. Petrushynets Manufacturing honeycomb panels on the base of high-entropy CoCrFeNiSi0.2 alloy foil produced by EB-PVD method (2023, №08)
  40. Yu.V. Falchenko, L.V. Petrushynets, V.Ie. Fedorchuk, V.A. Kostin, O.L. Puzrin Diffusion welding of magnesium alloy MA2-1 through a zinc interlayer (2023, №09)
  41. A.G. Poklyatskyi, V.E. Fedorchuk, S.I. Motrunich, Yu.V. Falchenko, M. Sahul Strength and structure of MA2-1M magnesium alloy butt joints produced by argon arc welding with a non-consumable electrode and by friction with stirring (2024, №02)
  42. M.A. Khokhlov, O.O. Makhnenko, V.A. Kostin, A.G. Pokliatskyi, Iu.V. Falchenko, Yu.A. Khokhlova Thermo-mechanical processes in friction stir welding of magnesium alloy sheets (2024, №05)
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2025 рік.
2023.12.15 Збірка тез доповідей конференції «Сучасні напрями розвитку адитивних технологій»
2023.11.28 Он-лайн трансляція конференції «Сучасні напрями розвитку адитивних технологій» на youtube каналі ІЕЗ
2023.11.24 Доступні для завантаження пдф-файли статей за 2022 рік!
2023.01.21
Збірка тез доповідей конференції «Зварювання та технічна діагностика для відновлення економіки України»
2022.11.12
НОВІ КНИГИ
2021.08.15
Програма конференції «Променеві технології в зварюванні і обробці матеріалів»
2021.08.07 Збірник праць Х Міжнародної конференціі Математичне моделювання та інформаційні технології в зварюванні та споріднених процесах
2021.05.14 Програма конференції «Сучасні технології з’єднання матеріалів»
2016.08.06 Новая книга: Pogrebisky D.Welding of Metals: Classification, Brief History, Development

Найсвіжіші номери журналів на сайті

Автоматичне зварювання №5 (2024), The Paton Welding Journal №10 (2024), Технічна діагностика та неруйнівний контроль №3 (2024), Сучасна електрометалургія №3 (2024).
  Офиційна сторінка на facebook_logo