1. Видавничий дім

Видавничий дім "Патон", №Grigorenko

grigorenko g.m.

Всього статей опубліковано в журналі«The Paton Welding Journal»: 44

  1. PETROV S.V., SAAKOV A.G., TARANOVA T.G., GRIGORENKO G.M. and KOSTIN V.A. Plasma hardening of surfaces of wheelset ridges 18 (2000, №03)
  2. LUKASH E.S., SHULYM V.F., GRIGORENKO G.M., SMIYAN O.D. and NEZNAMOVA L.O. Investigation of the influence of gravity on the composition of coatings from binary Ag-Cu alloys 37 (2000, №04)
  3. MARKASHOVA L.I., GRIGORENKO G.M., KHARCHENKO G.K., ARSENYUK V.V., GRIGORENKO S.G. and BOGAJCHUK I.L. STRUCTURE OF THE FERRITE BAND FORMED IN THE JOINT ZONE OF FERRITIC-PEARLITIC STEELS IN VACUUM PRESSURE WELDING 14 (2000, №05)
  4. TARANOVA T.G. and GRIGORENKO G.M. PECULIARITIES OF DIFFUSION BONDING OF MAGNETIC SYSTEM PARTS 18 (2000, №11)
  5. BORISOVA A.L., TUNIK A.Yu., GRIGORENKO G.M., KOSTIN V.A. and ASTAKHOV E.A. HIGH-TEMPERATURE TRIBOLOGICAL PROPERTIES OF THERMAL SPRAY COATINGS CONTAINING SOLID LUBRICANTS 31 (2000, №11)
  6. Kuchuk-Yatsenko S.I., Kharchenko G.K., Grigorenko G.M., Falchenko Yu.V., Taranova T.G., Gritskiv Ya.P., Zagadarchuk V.F. and Grigorenko S.G. Heterogeneity of pipe steel joints made by flash butt welding. 2 (2002, №02)
  7. Markashova L.I., Arsenyuk V.V. and Grigorenko G.M. Peculiarities of plastic deformation of dissimilar materials in pressure joining. 9 (2002, №05)
  8. Markashova L.I., Arsenyuk V.V., Grigorenko G.M. and Berdnikova E.N. Mass transfer processes in pressure joining of dissimilar metals ... 38 (2002, №07)
  9. Markashova L.I., Arsenyuk V.V., Grigorenko G.M. and Berdnikova E.N. Peculiarities of phase formation in pressure welding of dissimilar metals under conditions of high-rate deforming 9 (2002, №09)
  10. Markashova L.I., Arsenyuk V.V., Petushkov V.G. and Grigorenko G.M. Peculiarities of microstructure of explosion welded joints in nickel ... 19 (2002, №11)
  11. Grigorenko G.M., Grabin V.F., Golovko V.V., Kostin V.A., Alekseenko I.I. and Kapitanchuk L.M. Procedure of determination of sizes of ultradispersed non-metallic inclusions in metal of low-alloy steel welds ... 26 (2003, №04)
  12. Grigorenko G.M., Golovko V.V., Grabin V.F. and Kostin V.A. Effect of metallurgical characteristics of flux on structure and phase composition of high-strength weld metal. 7 (2004, №03)
  13. Grigorenko G.M., Kostin V.A., Golovko V.V. and Grabin V.F. Effect of chemical inhomogeneity on the formation of acicular ferrite in high-strength weld metal. 2 (2004, №04)
  14. Markashova L.I., Grigorenko G.M., Valevich M.L. and Petrov S.V. Features of the structure of surface metal layers in railway wheel treads after plasma treatment ... 18 (2005, №01)
  15. Grigorenko G.M., Golovko V.V., Kostin V.A. and Grabin V.F. Effect of microstructural factors on sensitivity of welds with ultra-low carbon content to brittle fracture ... 2 (2005, №02)
  16. Arsenyuk V.V., Markashova L.I., Grigorenko G.M., Polovetsky E.V. and Bugaets V.P. Peculiarities of formation of structure of titanium-steel joints under explosion welding conditions ... 19 (2005, №03)
  17. Labur T.M., Ishchenko A.Ya., Taranova T.G., Kostin V.A. and Grigorenko G.M. Nature and features of microdeformation in the zone of crack initiation and propagation in high-strength aluminuim alloy D16AT 2 (2005, №10)
  18. Labur T.M., Ishchenko A.Ya., Taranova T.G., Kostin V.A. and Grigorenko G.M. Features of crack initiation and propagation under the conditions of off-center tension of 1441 AlДLi alloy welded joints 6 (2005, №11)
  19. Markashova L.I., Grigorenko G.M., Ishchenko A.Ya., Lozovskaya A.V., Kushnaryova O.S., Alekseenko T.A. and Chajka A.A. Effect of scandium additions on structure-phase condition of weld metal produced by welding aluminium alloy 1460 ... 16 (2006, №01)
  20. Markashova L.I., Grigorenko G.M., Ishchenko A.Ya., Lozovskaya A.V. and Kushnaryova O.S. Effect of scandium additions on fine structure of weld metal in aluminium alloy 1460 welded joints ... 20 (2006, №02)
  21. Markashova L.I., Grigorenko G.M., Lozovskaya A.V., Kushnaryova O.S. and Fedorchuk V.E. Effect of scandium additions on structure-phase state of weld metal in aluminium alloy joints after heat treatment ... 7 (2006, №06)
  22. Labur T.M., Taranova T.G., Kostin V.A., Ishchenko A.Ya., Grigorenko G.M. and Fedorchuk V.E. Influence of structural transformations in welding of aluminium alloy B96 on fracture resistance parameters ... 17 (2006, №11)
  23. Labur T.M., Taranova T.G., Kostin V.A., Ishchenko A.Ya., Grigorenko G.M. and Chajka A.A. Nature of fracture of B96 alloy depending on heating conditions in welding ... 9 (2007, №02)
  24. Labur T.M., Ishchenko A.Ya., Taranova T.G., Kostin V.A., Grigorenko G.M. and Chajka A.A. Influence of thermophysical conditions of welding on fracture resistance of the HAZ metal in the joints of aluminium alloy V96tss ... 25 (2007, №04)
  25. Kuchuk-Yatsenko S.I., Grigorenko G.M., Novikova D.P., Zagadarchuk V.F., Kharchenko G.K., Grigorenko S.G. and Alekseenko I.I. Effect of energy input on ductile properties of flash butt welded joints in steel X70 ... 2 (2007, №06)
  26. Kulik V.M., Vasiliev V.G., Grigorenko G.M., Savitsky M.M. and Doroshenko L.K. Phase and structural transformations in welding and arc treatment of 30KhGSA steel joints ... 6 (2007, №09)
  27. Labur T.M., Ishchenko A.Ya., Taranova T.G., Kostin V.A. and Grigorenko G.M. Investigation of the fracture mode of welded joints of high-strength alloy V96tss under the conditions of off-center tension ... 16 (2007, №11)
  28. Grigorenko G.M., Kostin V.A. and Orlovsky V.Yu. Current capabilities of simulation of austenite transformations in low-alloyed steel welds ... 22 (2008, №03)
  29. T.M. LABUR, T.G. TARANOVA, G.M. GRIGORENKO, V.A. KOSTIN INFLUENCE OF THERMAL CONDITIONS OF WELDING ON THE FEATURES OF CRACK INITIATION IN THE HAZ OF JOINTS OF ALUMINIUM ALLOYS V96 AND V96tss (2009, №04)
  30. L.I. MARKASHOVA, G.M. GRIGORENKO, V.D. POZNYAKOV, E.N. BERDNIKOVA, T.A. ALEKSEENKO INFLUENCE OF THERMAL CYCLES OF WELDING AND EXTERNAL LOADING ON STRUCTURAL-PHASE VARIATIONS AND PROPERTIES OF JOINTS OF 17Kh2M STEEL (2009, №07)
  31. V.V. GOLOVKO, V.A. KOSTIN, G.M. GRIGORENKO PECULIARITIES OF THE INFLUENCE OF COMPLEX ALLOYING ON STRUCTURE FORMATION AND MECHANICAL PROPERTIES OF WELDS ON LOW-ALLOYED HIGH-STRENGTH STEELS (2011, №07)
  32. V.A. KOSTIN, V.V. GOLOVKO, G.M. GRIGORENKO METHODS FOR ASSESSMENT OF STRENGTHENING OF HSLA STEEL WELD METAL (2011, №10)
  33. L.I. Markashova, S.V. Akhonin, G.M. Grigorenko, M.G. Kruglenko, O.S. Kushnaryova, I.K. Petrichenko STRUCTURE AND PROPERTIES OF WELDED JOINTS ON TITANIUM ALLOYS CONTAINING SILICON ADDITIONS (2012, №11)
  34. V.A. Kostin, G.M. Grigorenko, V.D. Poznyakov, S.L. Zhdanov, T.G. Solomijchuk, T.A. Zuber, A.A. Maksimenko INFLUENCE OF WELDING THERMAL CYCLE ON STRUCTURE AND PROPERTIES OF MICROALLOYED STRUCTURAL STEELS (2012, №12)
  35. V.A. KOSTIN, G.M. GRIGORENKO, T.G. SOLOMIJCHUK, V.V. ZHUKOV, T.A. ZUBER MICROSTRUCTURE OF HAZ METAL OF JOINTS OF HIGH-STRENGTH STRUCTURAL STEEL WELDOX 1300 (2013, №03)
  36. G.M. GRIGORENKO, L.I. ADEEVA, A.Yu. TUNIK, S.N. STEPANYUK, M.A. POLESHCHUK, E.V. ZELENIN Structural features of fsw joints of metals with different element solubility in the solid phase (2014, №04)
  37. G.M. Grigorenko, L.I. Adeeva, A.Yu. Tunik, M.A. Poleshchuk, E.V. Zelenin, V.I. Zelenin, Yu.N. Nikityuk, V.A. Lukash Application of friction stir welding method for repair and restoration of worn-out copper plates of mccb moulds (2015, №06)
  38. G.M. Grigorenko, A.L. Puzrin, M.G. Atroshenko, M.A. Poleshchuk, A.V. Shevtsov, I.A. Mossokovskaya Autovacuum brazing in repair of copper panels of mccb moulds (2015, №09)
  39. G.M. Grigorenko, M.A. Poleshchuk, L.I. Adeeva, A.Yu. Tunik, E.V. Zelenin, S.N. Stepanyuk Peculiarities of structure of Cu–Cu, Ni–Cu and Steel–Cu joints produced by overlap friction stir welding method (2016, №06)
  40. V.V. Zhukov, G.M. Grigorenko, V.A. Shapovalov Additive manufacturing of metal products (Review) (2016, №06)
  41. G.M. Grigorenko, S.V. Akhonin, O.M. Zadorozhnyuk, I.N. Klochkov Structure and properties of fully-penetrated metal of two-phase titanium alloy with dispersion hardening at AAW (2016, №11)
  42. G.M. Grigorenko, L.I. Adeeva, A.Yu. Tunik, V.N. Korzhik, L.M. Kapitanchuk Features of the structure of plasma-arc coatings produced at application of flux-cored wires with a steel sheath and filler from B4C AND ZrO2 nanopowder (2017, №09)
  43. G.M. Grigorenko, V.D. Poznyakov, T.A. Zuber, V.A. Kostin Peculiarities of formation of structure in welded joints of microalloyed structural steel S460M (2017, №10)
  44. V.A. Kostin, G.M. Grigorenko Modelling of temperature fields, stresses and deformations in cylinder shells produced by additive manufacturing method (2019, №07)
Науково-практичні семінари:
«3D ДРУК МЕТАЛЕВИХ ВИРОБІВ»
(26 травня 2026 р.)
та «НЕРУЙНІВНИЙ КОНТРОЛЬ ТА МОНІТОРИНГ ТЕХНІЧНОГО СТАНУ»
(27 травня 2026 р.)
2026.03.05
НОВІ КНИГИ
2026.01.03 Доступні для завантаження пдф-файли статей «The Paton Welding Journal» за 2024 рік!
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing “The Paton Welding Journal”. Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.12.05
Збірка тез пленарних та стендових доповідей конференції Зварювання та споріднені технології для відновлення України
2025.06.02
Зб. тез доповідей наук.-техн. семінарів: 3D друк металевих виробів. Неруйнівний контроль та моніторинг технічного стану
Пропонуємо оформити передплату на видання ІЕЗ ім. Є.О. Патона на 2026 рік.
2023.12.15 Збірка тез доповідей конференції “Сучасні напрями розвитку адитивних технологій”

Найсвіжіші номери журналів на сайті

 Автоматичне зварювання #02 (2026), The Paton Welding Journal #04 (2026), Сучасна електрометалургія #01 (2026), Технічна діагностика та неруйнівний контроль #01 (2026),
  Офиційна сторінка на facebook_logo