The Paton Welding Journal, 2015, №05

The Paton Welding Journal 2015 №06

CONTENTS

• «TM. VELTEK Ltd.»: Strategy of development ... 3

MODERN METHODS OF SURFACING, TECHNOLOGIES OF SURFACING AND THEIR APPLICATION

• Turyk E. and Rybtsev I.A. Experience in application of the European standards for qualification of surfacing procedures ... 5 https://doi.org/10.15407/tpwj2015.06.01
• Pereplyotchikov E.F. Plasma-powder surfacing of nickel and cobalt alloys on copper and its alloys ... 10 https://doi.org/10.15407/tpwj2015.06.02
• Yarovitsyn A.V. Energy approach in analysis of microplasma powder surfacing modes ... 14 https://doi.org/10.15407/tpwj2015.06.03
• Som A.I. Effect of scheme of powder feeding into arc on its losses and efficiency of plasma-powder surfacing process ... 22 https://doi.org/10.15407/tpwj2015.06.04
• Khaskin V.Yu., Shelyagin V.D. and Bernatsky A.V. Modern state and challenges for development of laser and hybrid surfacing technologies (Review) ... 26 https://doi.org/10.15407/tpwj2015.06.05
• Kuskov Yu.M., Gordan G.N., Bogajchuk I.L. and Kajda T.V. Electroslag surfacing using discrete materials of different methods of manufacture ... 30 https://doi.org/10.15407/tpwj2015.06.06
• Kuzmenko O.G. Peculiarities of heating of stamped billets in non-consumable electrode electroslag surfacing ... 34 https://doi.org/10.15407/tpwj2015.06.07
• Majdanchuk T.B., Ilyushenko V.M. and Bondarenko A.N. Improvement of bimetal joint quality in submerged arc surfacing of high-tin bronze on steel ... 37 https://doi.org/10.15407/tpwj2015.06.08
• Lendel I.V., Maksimov S.Yu., Lebedev V.A. and Kozyrko O.A. Effect of pulsed electrode wire feeding on formation and wear resistance of deposited bead and losses of electrode metal in CO₂ arc surfacing ... 41 https://doi.org/10.15407/tpwj2015.06.09
• Peremitko V.V. and Nosov D.G. Optimization of modes of submerged arc surfacing over the layer of alloying charge of caterpillar machine running gear parts ... 44 https://doi.org/10.15407/tpwj2015.06.10
• Kuznetsov V.D. and Stepanov D.V. Wear-resistant surfacing with feeding of nanopowders to weld pool ... 47 https://doi.org/10.15407/tpwj2015.06.11
• Bartenev I.A. Peculiarities of fire-cracker plate electrode arc surfacing over alloying charge ... 52 https://doi.org/10.15407/tpwj2015.06.12
• Grigorenko G.M., Adeeva L.I., Tunik A.Yu., Poleshchuk M.A., Zelenin E.V., Zelenin V.I., Nikityuk Yu.N. and Lukash V.A. Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds ... 55 https://doi.org/10.15407/tpwj2015.06.13
• Pulka Ch.V., Shably O.N., Baranovsky V.N., Senchishin V.S. and Gavrilyuk V.Ya. Ways of updating the technology of induction surfacing of thin steel discs ... 59 https://doi.org/10.15407/tpwj2015.06.14

SURFACING MATERIALS, DEPOSITED METAL. COMPOSITION, STRUCTURE, PROPERTIES

• Mazur A.A., Makovetskaya O.K., Pustovojt S.V. and Brovchenko N.S. Flux-cored wires at the world and regional markets of welding consumables (Review) ... 63 https://doi.org/10.15407/tpwj2015.06.15
• Shevchenko S.B., Krivtsun I.V., Golovko L.F., Lutaj A.N. and Slobodyanyuk V.P. Capabilities of laser radiation for improvement of electrode wire quality ... 70 https://doi.org/10.15407/tpwj2015.06.16
• Ryabtsev I.A., Panfilov A.I., Babinets A.A., Ryabtsev I.I., Gordan G.N. and Babijchuk I.L. Structure and abrasive wear resistance of deposited metal hardened with carbides of different types ... 78 https://doi.org/10.15407/tpwj2015.06.17
• Osin V.V. Flux-cored wires providing deposited metal with high resistance to adhesion wear ... 83 https://doi.org/10.15407/tpwj2015.06.18
• Lentyugov I.P. and Ryabtsev I.A. Structure and properties of metal deposited by flux-cored wire with charge of used metal-abrasive wastes ... 87 https://doi.org/10.15407/tpwj2015.06.19
• Yushchenko K.A., Kakhovsky Yu.N., Bulat A.V., Samojlenko V.I. and Kakhovsky N.Yu. New electrodes for repair surfacing of damaged lining of impeller chamber of HES hydropower units ... 90 https://doi.org/10.15407/tpwj2015.06.20
• Zhudra A.P., Voronchuk A.P., Fomakin A.A. and Veliky S.I. Materials and equipment for surfacing of metal hot cutting knives ... 93 https://doi.org/10.15407/tpwj2015.06.21
• Markashova L.I., Poznyakov V.D., Gajvoronsky A.A., Berdnikova E.N. and Alekseenko T.A. Structure and properties of railway wheel surface after restoration surfacing and service loading ... 96 https://doi.org/10.15407/tpwj2015.06.22
• Rosert R. Cobalt-based alloys for surfacing ... 101 https://doi.org/10.15407/tpwj2015.06.23
• Voronchuk A.P., Zhudra A.P., Kochura V.O., Petrov A.V. and Fedosenko V.V. Peculiarities of technology of manufacture and application of flux-cored strips for surfacing ... 107 https://doi.org/10.15407/tpwj2015.06.24
• Bely A.I., Zhudra A.P., Roslyakov A.I., Petrov V.V. and Loboda P.I. Effect of alloying on physicomechanical properties of fused tungsten carbides ... 112 https://doi.org/10.15407/tpwj2015.06.25
• Sukhovaya E.V. Double-layer surfacing compositions based on filling material of Cr—Ti—C alloying system ... 116 https://doi.org/10.15407/tpwj2015.06.26
• Kuskov Yu.M., Gordan G.N., Eremeeva L.T., Bogajchuk I.L. and Kajda T.V. Effect of magnetic-pulsed treatment of filler materials on deposited metal structure ... 121 https://doi.org/10.15407/tpwj2015.06.27
• Markashova L.I., Shelyagin V.D., Kushnaryova O.S. and Bernatsky A.V. Effect of technological parameters of laser and laser-plasma alloying on properties of 38KhN3MFA steel layers ... 124 https://doi.org/10.15407/tpwj2015.06.28

APPLICATION OF MATHEMATICAL METHODS IN INVESTIGATIONS OF SURFACING PROCESSES

• Senchenkov I.K., Ryabtsev I.A. and Turyk E. Structural scheme of procedure for calculation of stress-strain state of parts during surfacing and further service ... 130 https://doi.org/10.15407/tpwj2015.06.29
• Senchenkov I.K., Chervinko O.P. and Ryabtsev I.A. Calculation of fatigue life of cylindrical parts at multilayer surfacing and service cyclic thermomechanical loading ... 134 https://doi.org/10.15407/tpwj2015.06.30
• Gopkalo A.P. and Klipachevsky V.V. Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets ... 140 https://doi.org/10.15407/tpwj2015.06.31
• Kushchy A.M. and Vlasov A.F. Modeling of process of melting of electrodes with exothermal mixture in coating during repair welding and surfacing ... 142 https://doi.org/10.15407/tpwj2015.06.32