bernatskiy a.v.
Total articles published in the journal «The Paton Welding Journal»: 31
- Bernatsky A.V. Influence of anisotropy of the rolled stock mechanical properties on initiation, development of tough, lamellar-tough fractures 31 (2000, №07)
- Shelyagin V.D., Khaskin V.Yu., Garashchuk V.P., Siora A.V., Bernatsky A.V., Sakharnov A.V. Hybrid CO2-laser, CO2 consumable-arc welding ... 35 (2002, №10)
- Bernatsky A.V. Additional approaches to the evaluation of susceptibility of low-carbon, low-alloy steels to lamellar-tough, lamellar-brittle fractures... 21 (2003, №05)
- Shelyagin V.D., Krivtsun I.V., Borisov Yu.S., Khaskin V.Yu., Nabok T.N., Siora A.V., Bernatsky A.V., Vojnarovich S.G., Kislitsa A.N., Nedej T.N. Laser-arc, laser-plasma welding, coating technologies .... 44 (2005, №08)
- Shelyagin V.D., Khaskin V.Yu., Shitova L.G., Nabok T.N., Siora A.V., Bernatsky A.V., Chizhskaya T.G. Multi-pass welding of heavy steel sections using laser radiation 46 (2005, №10)
- V.D. Shelyagin, V.Yu. Khaskin, A.V. Siora, A.V. Bernatsky, E.I. Goncharenko, T.G. Chizhskaya Gas-shielded laser and laser-arc welding of steels (2007, №01)
- E.G. Ternovoj, V.F. Shulym, V.Yu. Khaskin, V.D. Shelyagin, A.V. Lozovskaya, A.V. Siora, A.V. Bernatsky Properties and structure of hybrid laser-plasma welded joints in aluminium alloys (2007, №11)
- B.E. Paton, V.D. Shelyagin, S.V. Akhonin, V.F. Topolsky, V.Yu. Khaskin, I.K. Petrichenko, A.V. Bernatsky, R.N. Mishchenko, A.V. Siora Laser welding of titanium alloys (2009, №10)
- V.D. Shelyagin, V.Yu. Khaskin, V.S. Mashin, M.P. Pashulya, A.V. Bernatsky, A.V. Siora Features of laser-mig welding of high-strength aluminium alloys (2009, №12)
- V.D. Shelyagin, V.Yu. Khaskin, A.V. Bernatsky, A.V. Siora Prospects of application of laser, hybrid technologies of welding steels to increase service life of pipelines (2010, №10)
- V.D. Shelyagin, A.G. Lukashenko, D.A. Lukashenko, A.V. Bernatsky, V.P. Garashchuk, V.I. Lutsenko Laser welding of thin-sheet stainless steel (2011, №04)
- Yu.S. Borisov, V.Yu. Khaskin, S.G. Vojnarovich, A.N. Kislitsa, A.Yu. Tunik, L.I. Adeeva, E.K. Kuzmich-yanchuk, A.V. Bernatsky, A.V. Siora Combined laser-microplasma cladding with powders of Ni-Cr-B-Si system alloys (2012, №11)
- A.V. Bernatsky Laser surface alloying of steel items (Review) (2013, №12)
- V.D. Shelyagin, L.I. Markashova, V.Yu. Khaskin, A.V. Bernatsky, O.S. Kushnaryova Laser, laser-microplasma alloying of surface of 38KhN3MFA steel specimens (2014, №02)
- V.D. Shelyagin, V.Ya. Saenko, A.A. Polishko, V.A. Ryabinin, A.V. Bernatsky, S.N. Stepanyuk, I.N. Klochkov, Palagesha A.N. Laser welding of commercial arc slag remelted titanium VT1-0 hardened by nitrogen (2015, №04)
- V.Yu. Khaskin, V.D. Shelyagin, A.V. Bernatsky Modern state, challenges for development of laser, hybrid surfacing technologies (Review) (2015, №06)
- L.I. Markashova, V.D. Shelyagin, O.S. Kushnaryova, A.V. Bernatsky Effect of technological parameters of laser, laser-plasma alloying on properties of 38KhN3MFA steel layers (2015, №06)
- V.D. Poznyakov, V.D. Shelyagin, S.L. Zhdanov, A.A. Maksimenko, A.V. Zavdoveev, A.V. Bernatsky Laser-arc welding of high-strength steels with yield strength of more than 700 MPa (2015, №10)
- V.D. Poznyakov, V.D. Shelyagin, S.L. Zhdanov, A.V. Bernatsky, A.V. Siora Comparative evaluation of properties of high-strength N-A-XTRA-70 steel welded joints produced using arc, laser, hybrid laser-arc method (2016, №06)
- V.D. Shelyagin, V.Yu. Khaskin, A.V. Bernatsky, A.V. Siora Laser welding of thin-wall filter elements of steel 08Kh18N10T (2017, №04)
- V.D. Shelyagin, A.V. Bernatsky, V.Yu. Khaskin, I.V. Shuba, A.V. Siora Investigation of physical features, technological capabilities of continuous optical discharge (2017, №09)
- V.D. Shelyagin, A.G. Lukashenko, V.Yu. Khaskin, A.V. Bernatsky, A.V. Siora, D.A. Lukashenko, I.V. Shuba Developments in the field of laser wedling equipment, technologies performed AT E.O. Paton electric welding institute (Review) (2017, №12)
- V.D. Poznyakov, V.D. Shelyagin, S.L. Zhdanov, A.V. Bernatsky, A.A. Maksymenko, A.V. Siora Effect of parameters of arc, laser, hybrid methods of welding on structure, properties of butt joints of high-strength steel S460M (2018, №01)
- L.I. Markashova, V.D. Poznyakov, V.D. Shelyagin, E.N. Berdnikova, A.V. Bernatsky, T.A. Alekseenko Effect of metal structure on service properties of high-strength steel welded joints produced using different methods of welding (2018, №02)
- A.V. Bernatskii, V.D. Shelyagin, O.V. Siora, V.M. Sydorets, O.M. Berdnikova Impact of spatial position in laser welding on quality level of welded joints of AISI 321 steel (2020, №01)
- V.Yu. Khaskin, V.M. Korzhyk, A.V. Bernatskii, O.M. Voitenko, Ye.V. Illyashenko, D. Cai Features of synergistic effect manifestation in laser-plasma welding of SUS304 steel, using disc laser radiation (2020, №04)
- V.D. Shelyagin, A.V. Bernadskyi, O.V. Siora, V.A. Kurylo, O.M. Suchek Development of remotely-controlled equipment and technology for laser welding repair and restoration of performance of NPP steam generators (2020, №12)
- V.D. Shelyagin, A.V. Bernatskyi, O.V. Siora, V.I. Bondareva, M.P. Brodnikovskyi Structure of laser welded joints of multicomponent high-entropy alloy of Nb–Cr–Ti–Al–Zr system (2021, №06)
- V.M. Korzhyk, V.Yu. Khaskin, A.A. Grynyuk, E.V. Illyashenko, A.V. Bernatskyi, S.I. Peleshenko Features of laser-plasma welding of corrosion-resistant steel AISI 304 with laser application (2021, №12)
- A.V. Bernatsky, O.V. Siora, V.I. Bondareva, N.O. Shamsutdinova, Yu.V. Yurchenko Use of laser welding and surfacing technologies for repair and manufacture of thin-walled welded joints of high-alloy steels (2023, №07)
- M.V. Sokolovskyi, A.V. Bernatskyi, N.O. Shamsutdinova, Yu.V. Yurchenko, O.O. Danileiko Additive manufacturing of structural elements on a thin-walled base: challenges and difficulties (Review) (2023, №11)
Scientific and practical seminars:
"3D PRINTING OF METAL PRODUCTS"
(May 26, 2026)
and "NON-DESTRUCTIVE TESTING AND TECHNICAL CONDITION MONITORING"
(May 27, 2026)
Starting from 2026.01.03, you can download PDF files of «The Paton Welding Journal» for the year 2024!
2025.12.06
Collection of abstracts of conference Welding and related technologies for the restoration of Ukraine (November 27, 2025, Kyiv)
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing «The Paton Welding Journal». Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.06.02
Collection of abstracts of scientific and technical seminars: "3D PRINTING OF METAL PRODUCTS" (May 27, 2025) and "NON-DESTRUCTIVE TESTING AND TECHNICAL CONDITION MONITORING" (May 28, 2025)
"3D PRINTING OF METAL PRODUCTS"
(May 26, 2026)
and "NON-DESTRUCTIVE TESTING AND TECHNICAL CONDITION MONITORING"
(May 27, 2026)
Starting from 2026.01.03, you can download PDF files of «The Paton Welding Journal» for the year 2024!
2025.12.06
Collection of abstracts of conference Welding and related technologies for the restoration of Ukraine (November 27, 2025, Kyiv)
2025.12.05
We are pleased to announce that on 5 December 2025, Scopus accepted our application for indexing «The Paton Welding Journal». Importantly, this decision includes indexing articles published between 2022 and 2025. We sincerely congratulate us all on this joint achievement and encourage Authors to submit new manuscripts.
2025.06.02
Collection of abstracts of scientific and technical seminars: "3D PRINTING OF METAL PRODUCTS" (May 27, 2025) and "NON-DESTRUCTIVE TESTING AND TECHNICAL CONDITION MONITORING" (May 28, 2025)