Makhnenko O.V.
«The Paton Welding Journal» (2000-2024)
«Automatic Welding» (2007-2024)
«Technical Diagnostics and Non-Destructive Testing» (2001-2024)
«Electrometallurgy Today» (2001-2024)
| Author: | Number of articles | Number of articles in TPWJ-AS*-TDNK-SEM | Years of Publications | |
| makhnenko o.v. | 61 | 47-6-8-0 | 2000 | 2024 |
- Vorona G.V., Kostenevych O.S., Milenin O.S., Makhnenko O.V. Reinforcement Of An Npp Pipeline With A Wall Thinning Defect By Applying External Weld Overlay
(The Paton Welding Journal, 2024, №09) - Махненко О.В., Міленін О.С., Павловський В.І., Савицький В.В., Царик Б.Р. Залишкові напруження при зварюванні тертям з перемішуванням пластин з термозмі- цненого алюмінієвого сплаву 2219-T81
(Technical Diagnostics and Non-Destructive Testing, 2024, №03) - Tsaryk B.R., Makhnenko O.V. Mathematical Modelling Of Distortions At Welding Of Large Vessels Of Aluminium Alloy
(The Paton Welding Journal, 2024, №08) - Ворона Г.В., Костеневич О.С., Міленін О.С., Махненко О.В. Підсилення ділянки трубопроводу АЕС з дефектом стоншення стінки при встановленні зварної латки
(Technical Diagnostics and Non-Destructive Testing, 2024, №02) - Царик Б.Р., Махненко О.В. Математичне моделювання загальних деформацій при зварюванні великогабаритних ємностей з алюмінієвих сплавів
(Automatic Welding, 2024, №04) - Vorona G.V., Makhnenko O.V., Milenin O.S. Effectiveness Of Unloading A Section Of Nps Pipeline With A Pipe Wall Thinning Defect By Mounting A Band Or Welded Sleeve
(The Paton Welding Journal, 2024, №02) - Ворона Г.В., Махненко О.В., Міленін О.С. Ефективність розвантаження ділянки трубопроводу АЕС з дефектом стоншення стінки при встановлені бандажу або зварної муфти
(Technical Diagnostics and Non-Destructive Testing, 2023, №04) - Makhnenko O.V., Saprykina G.Yu., Savytska O.M., Ananchenko M.S. Reconditioning Repair Of Steam Turbine Blades Using Additive Technology
(The Paton Welding Journal, 2023, №11) - Махненко О.В., Саприкіна Г.Ю., Савицька О.М., Ананченко М.С. Відновлювальний ремонт робочих лопаток парової турбіни за допомогою адитивної технології
(Automatic Welding, 2023, №11) - Махненко О.В., Міленін О.С., Мужиченко О.Ф., Кандала С.М., Савицька О.М., Саприкіна Г.Ю. Математичне моделювання релаксації залишкових напружень при проведенні післязварювальної термообробки
(Automatic Welding, 2023, №06) - Makhnenko O.V., Milenin O.S., Muzhychenko O.F., Kandala S.M., Savytska O.M., Saprykina G.Yu. Mathematical Modeling Of Residual Stress Relaxation During Performance Of Postweld Heat Treatment
(The Paton Welding Journal, 2023, №06) - Макаренко А.А., Махненко О.В. Математичне моделювання залишкових напружень в композитному зварному з’єднанні перехідної втулки колектора до патрубка парогенератора ПГВ-440
(Automatic Welding, 2023, №03) - Makarenko A.A., Makhnenko O.V. Mathematical Modeling Of Residual Stresses In A Composite Welded Joint Of The Collector Adapter Sleeve To The Branch Pipe Of Zpm-440 Steam Generator
(The Paton Welding Journal, 2023, №03) - Makhnenko O.V., Kandala S.M. Influence Of Residual Process Stresses On Brittle Fracture Resistance Of Wwer-1000 Reactor Baffle In Case Of An Emergency
(The Paton Welding Journal, 2023, №01) - Махненко О.В., Кандала С.М. Вплив залишкових технологічних напружень на опір крихкому руйнуванню вигородки реактора ВВЕР-1000 в умовах аварійної ситуації
(Technical Diagnostics and Non-Destructive Testing, 2022, №04) - Tsaryk B.R., Muzhichenko O.F., Makhnenko O.V. Mathematical Model Of Determination Of Residual Stresses And Strains In Friction Stir Welding Of Aluminium Alloy
(The Paton Welding Journal, 2022, №09) - Царик Б.Р., Мужиченко О.Ф., Махненко О.В. Математична модель визначення залишкових напружень і деформацій при зварюванні тертям з перемішуванням алюмінієвого сплаву
(Automatic Welding, 2022, №09) - Махненко О.В., Кандала С.М. Оцінка опору крихкому руйнуванню вигородки реактора ВВЕР-1000 в процесі довготривалої експлуатації з урахуванням залишкових технологічних напружень .
(Technical Diagnostics and Non-Destructive Testing, 2022, №03) - Makhnenko O.V., Kandala S.M. Evaluation Of Brittle Fracture Resistance Of Wwer-1000 Reactor Enclosure During Long-term Service, Taking Into Account The Residual Technological Stresses
(The Paton Welding Journal, 2022, №08) - Makhnenko O.O., Makhnenko O.V. Calculated Estimation Of Load-carrying Capacity Of The Main Span Beams Of The E.o. Paton Bridge Across The Dnipro In Kyiv By Nondestructive Testing Results
(The Paton Welding Journal, 2022, №02) - Makarenko A.A., Makhnenko O.V. Mathematical Modeling Of Residual Stresses In Composite Welded Joints Of Wwer-1000 Reactor Vessel Cover With Css Nozzles
(The Paton Welding Journal, 2022, №01) - Макаренко А.А., Махненко О.В. Математичне моделювання залишкових напружень в композитних зварних з’єднаннях кришки корпусу реактора ВВЕР-1000 з патрубками СУЗ
(Automatic Welding, 2022, №01) - Махненко О.О., Махненко О.В. Розрахункова оцінка несучої здатності головних прогонових балок мосту ім. Є.О. Патона через р. Дніпро у м. Києві за результатами неруйнівного контролю
(Technical Diagnostics and Non-Destructive Testing, 2021, №04) - Makhnenko O.V., Kandala S.M., Basystyuk N.R., Cherkashin M.V. Mathematical Modeling Of Residual Stresses In Wwer-1000 Elements After Heat Treatment
(The Paton Welding Journal, 2021, №03) - Egorova S.V., Makhnenko O.V., Saprykina G.Yu., Syneok D.P. Mathematical Models Of The Dependence Of Mechanical Properties On Chemical Composition Of Steels For Esw
(The Paton Welding Journal, 2021, №01) - Makhnenko O.V., Milenin O.S., Velykoivanenko O.A., Rozynka G.P., Pivtorak N.I. Numerical Analysis Of The Features Of Limiting State Of Welded Pipeline Elements Under Ultra-low-cycle Loading Conditions
(The Paton Welding Journal, 2021, №01) - Makhnenko O.V., Milenin O.S., Velykoivanenko O.A., Rozynka G.P., Kozlitina S.S., Pivtorak N.I., Dzyubak L.I. Prediction Of The Kinetics Of Temperature Fields And Stress-strain State Of Dissimilar Products, Manufactured By Layer-by-layer Forming
(The Paton Welding Journal, 2021, №01) - Makhnenko O.V., Kostenevych O.S. Impact Of Technological Parameters Of Arc Deposition Of An Anticorrosion Layer In The Vessel Of Wwer-1000 Reactor On Residual Stress Distribution
(The Paton Welding Journal, 2020, №12) - Lobanov L.M., Makhnenko O.V., Knysh V.V., Solovej S.A., Pavlovskyi V.I. Development Of Welded Structure Of Side Frame Of Freight Car Bogie Of Increased Reliability
(The Paton Welding Journal, 2020, №03) - Makhnenko O.V., Kostin V.A., Zhukov V.V., Kostenevich E.S. Effect Of Cooling Cycle Of Welding On Structure-phase Composition Of 15kh2nmfa Steel
(The Paton Welding Journal, 2019, №09) - Nesterenkov V.M., Orsa Yu.V., Khripko K.S., Makhnenko O.V. Technology For Ebw Of Aircraft Structures Of Titanium Alloys
(The Paton Welding Journal, 2018, №08) - Тороп В.М., Махненко О.В., Сапрыкина Г.Ю., Гопкало Е.Е. Результаты исследований причин образования трещин в лопатках из титанового сплава паровых турбин типа К-1000-60/3000 ...3
(Technical Diagnostics and Non-Destructive Testing, 2018, №02) - Makhnenko O.V., Milenin A.S., Velikoivanenko E.A., Pivtorak N.I., Kovalchuk D.V. Modelling Of Temperature Fields And Stress-strain State Of Small 3d Sample In Its Layer-by-layer Forming
(The Paton Welding Journal, 2017, №03) - Makhnenko O.V., Mirzov I.V., Porokhonko V.B. Modelling Of Residual Stresses, Radiation Swelling And Stressed State Of In-service Wwer-1000 Reactor Baffle
(The Paton Welding Journal, 2016, №04) - Makhnenko O.V., Milenin A.S., Saprykina G.Yu. Evaluation Of Operability Of Wwr-m Reactor Primary Circuit Piping With Welded Joint Defects
(The Paton Welding Journal, 2015, №01) - Дуб А.В., Дурынин В.А., Разыграев А.Н., Разыграев Н.П., Харина И.Л., Лобанов Л.М., Махненко В.И., Махненко О.В., Сапрыкина Г.Ю. Разработка методик ультразвукового контроля и определения работоспособности узла приварки коллектора к парогенератору ПГВ-1000М... 36
(Technical Diagnostics and Non-Destructive Testing, 2014, №04) - Makhnenko O.V., Velikoivanenko E.A., Mirzov I.V. Redistribution Of Residual Welding Stresses In In-vessel Core Barrel Of Wwer-1000 Reactor During Operation
(The Paton Welding Journal, 2014, №11) - Lobanov L.M., Makhnenko O.V., Saprykina G.Yu., Pustovoj A.D. Fatigue Calculation For Welded Joints Of Bearing Elements Of Freight Car Bogie
(The Paton Welding Journal, 2014, №10) - Makhnenko O.V., Saprykina G.Yu., Mirzov I.V., Pustovoj A.D. Prospects For Development Of Load-carrying Elements Of Freight Car Bogie
(The Paton Welding Journal, 2014, №03) - Lobanov L.M., Poznyakov V.D., Makhnenko O.V. Formation Of Cold Cracks In Welded Joints From High-strength Steels With 350-850 Mpa Yield Strength
(The Paton Welding Journal, 2013, №07) - Makhnenko O.V., Prudky I.I. Information Systems For Selection Of Arc Welding Process Parameters (review)
(The Paton Welding Journal, 2013, №04) - Makhnenko V.I., Makhnenko O.V., Velikoivanenko E.A., Rozynka G.F., Pivtorak N.I. Indices Of Pore Formation In Heat Treatment Of Welded Assemblies From Steels Susceptible To Tempering Cracking
(The Paton Welding Journal, 2013, №03) - Makhnenko O.V., Muzhichenko A.F., Prudky I.I. Mathematical Modelling Of Stress-strain State Of Welded Stringer Panels From Titanium Alloy Vt20
(The Paton Welding Journal, 2013, №02) - Makhnenko O.V., Mirzov I.V. Investigation Of Stress-strain State Of Welded Structures From Austenitic Steel At Radioactive Irradiation
(The Paton Welding Journal, 2013, №01) - Makhnenko V.I., Markashova L.I., Makhnenko O.V., Berdnikova E.N., Shekera V.M., Zubchenko A.S. Growth Of Corrosion Cracks In Structural Steel 10gn2mfa
(The Paton Welding Journal, 2012, №08) - Makhnenko V.I., Makhnenko O.V., Kozlitina S.S., Dzyubak L.I. Welded Structures From Austenitic Steel Of 10kh18n10t Type Under Conditions Of Radiation-induced Swelling
(The Paton Welding Journal, 2012, №02) - Makhnenko O.V., Timoshenko A.N., Muzhichenko A.F., Goncharov P.V. Improvement Of The Technology For Arc Spot Welding Of Overlap Joints Based On The Results Of Mathematical Modelling
(The Paton Welding Journal, 2010, №11) - Makhnenko V.I., Poznyakov V.D., Velikoivanenko E.A., Makhnenko O.V., Rozynka G.F., Pivtorak N.I. Risk Of Cold Cracking In Welding Of Structural High-strength Steels
(The Paton Welding Journal, 2009, №12) - Makhnenko O.V., Muzhichenko A.F., Seyffarth P. Application Of Mathematical Modelling In Thermal Straightening Of Shipbuilding Panels
(The Paton Welding Journal, 2009, №01) - Makhnenko O.V. Increase Of Efficiency Of Thermal Straightening Of Welded Thin-sheet Structures On Basis Of Mathematical Modeling ... 6
(The Paton Welding Journal, 2008, №09) - Makhnenko O.V., Seyffarth P. Calculation Prediction Of Overall Distortions In Laser Welded Beams ... 6
(The Paton Welding Journal, 2008, №03) - Makhnenko O.V., Muzhichenko A.F. Mathematical Modelling Of Thermal Straightening Of Cylindrical Shells And Shafts With Distortions Along Their Longitudinal Axis ... 17
(The Paton Welding Journal, 2007, №09) - Makhnenko O.V., Velikoivanenko E.A., Pivtorak N.I. Numerical Study Of Risk Of Lamellar Cracks Formation In Welding Of Shells Of Manholes Into Body Of 75,000 M3 Reservoir 2
(The Paton Welding Journal, 2007, №08) - Makhnenko O.V., Makhnenko V.I. Prediction Of Fatigue Life Of Welded Assemblies In Bridge Arched Pillars ... 2
(The Paton Welding Journal, 2007, №05) - Makhnenko V.I., Makhnenko O.V., Zinchenko O.Ya. Investigation Of Performance Of Welded Joints In Steam Generators Pgv-1000m By Leak Tests ... 31
(The Paton Welding Journal, 2007, №04) - Paton B.E., Lobanov L.M., Samilov V.N., Pilishenko I.S., Makhnenko O.V., Pashchin N.A., Gorinov V.A., Shiyan K.V. Design And Features Of Fabrication Technology Of A Large-sized Transformable Shell Structure 2
(The Paton Welding Journal, 2006, №07) - Makhnenko V.I., Garf E.F., Rimsky S.T., Galinich V.I., Makhnenko O.V., Yukhimets P.S., Bubnov V.M., Tusikov E.K., Varenchuk P.A. Welded Freight Bogie Bolster Project ... 2
(The Paton Welding Journal, 2006, №04) - Paton B.E., Lobanov L.M., Tsybulkin G.A., Makhnenko O.V., Pereverzev Yu.N. Automated Thermal Straightening Of Welded Thin-sheet Structures ... 2
(The Paton Welding Journal, 2003, №07) - Makhnenko V.I., Velikoivanenko E.A., Makhnenko O.V., Rozynka G.F., Pivtorak N.I., Seyffarth P., Bautzmann K. Computer Program "welding Of Tubes To Tube Sheets Of Heat Exchangers" ... 2
(The Paton Welding Journal, 2002, №08) - Makhnenko V.I., Makhnenko O.V. Development Of Calculation Procedures For Assessment Of Allowable Defects In Welded Joints Of Critical Structures ... 79
(The Paton Welding Journal, 2000, №09) - Makhnenko V.I., Velikoivanenko E.A., Makhnenko O.V., Rozynka G.F., Pivtorak N.I. Investigation Of Effect Of Phase Transformations On Residual Stresses In Circumferential Welding Of Pipes 2
(The Paton Welding Journal, 2000, №05)
2024.03.01
(2024) Access to first article from the contents of "The Paton Welding Journal" is open.
(2023) Access to all article from the contents of "The Paton Welding Journal" is open.
---
Publication of scientific articles in "The Paton Welding Journal" is free
Starting from 2023.11.05, you can download PDF files of journals for the year 2022!
2021.08.07 Proceedings of X International Conference Mathematical Modeling and Information Technologies in Welding and Related Processes
Official Facebook Page
(2024) Access to first article from the contents of "The Paton Welding Journal" is open.
(2023) Access to all article from the contents of "The Paton Welding Journal" is open.
---
Publication of scientific articles in "The Paton Welding Journal" is free
Starting from 2023.11.05, you can download PDF files of journals for the year 2022!
2021.08.07 Proceedings of X International Conference Mathematical Modeling and Information Technologies in Welding and Related Processes
The most recent issues of journals on the site
Automatic Welding №5 (2024), The Paton Welding Journal №10 (2024), Technical Diagnostics and Non-Destructive Testing №3 (2024), Electrometallurgy Today №3 (2024).Official Facebook Page
