Petrushinets L.V.
«The Paton Welding Journal» (2000-2024)
«Automatic Welding» (2007-2024)
«Technical Diagnostics and Non-Destructive Testing» (2001-2024)
«Electrometallurgy Today» (2001-2024)
| Author: | Number of articles | Number of articles in TPWJ-AS*-TDNK-SEM | Years of Publications | |
| petrushinets l.v. | 27 | 21-4-0-2 | 2009 | 2023 |
- Falchenko Yu.V., Petrushynets L.V., Fedorchuk V.Ie., Kostin V.A., Puzrin O.L. Diffusion Welding Of Magnesium Alloy МА2-1 Through A Zinc Interlayer
(The Paton Welding Journal, 2023, №09) - Фальченко Ю.В., Петрушинець Л.В., Федорчук В.Є., Костін В.А., Пузрін О.Л. Дифузійне зварювання магнієвого сплаву МА2-1 через проміжний прошарок з цинку
(Automatic Welding, 2023, №09) - Устінов А.І., Фальченко Ю.В., Демченков С.О., Петрушинець Л.В. Виготовлення стільникових панелей на основі фольги високоентропійного сплаву CoCrFeNiSi0,2, отриманої методом EB-PVD
(Automatic Welding, 2023, №08) - Ustinov A.I., Falchenko Iu.V., Demchenkov S.O., Petrushynets L.V. Manufacturing Honeycomb Panels On The Base Of High-entropy Cocrfenisi0.2 Alloy Foil Produced By Eb-pvd Method
(The Paton Welding Journal, 2023, №08) - Горбань В.Ф., Фальченко Ю.В., Петрушинець Л.В., Мельниченко Т.В., Крапівка М.О., Вербило Д.Г., Назаренко В.А. Вплив високоентропійного прошарку системи CrMnFeCoNi на мікромеханічні властивості з’єднань з жароміцного сплаву ЕІ437Б
(Automatic Welding, 2023, №03) - Устінов А.І., Мельниченко Т.В., Фальченко Ю.В., Петрушинець Л.В. Вплив багатошарових прошарків Al–Si та Al–Cu на формування структури зʼєднання композиту SiCр–АМг5 при дифузійному зварюванні
(Electrometallurgy Today, 2022, №03) - Петрушинець Л.В., Фальченко Ю.В., Новомлинець О.О., Федорчук В.Є. Застосування шаруватого композиційного матеріалу на основі сплавів алюмінію та титану для отримання зварних тришарових стільникових панелей
(Automatic Welding, 2022, №07) - Petrushinets L.V., Falchenko Yu.V., Novomlynets O.O., Fedorchuk V.E. Application Of A Layered Composite Material Based On Aluminium And Titanium Alloys To Produce Welded Three-layer Honeycomb Panels
(The Paton Welding Journal, 2022, №07) - Falchenko Yu.V., Petrushynets L.V. Modern Technological Methods Of Pressure Welding Of Magnesium Alloys (review)
(The Paton Welding Journal, 2022, №06) - Falchenko Iu.V., Petrushynets L.V., Fedorchuk V.Ye., Polovetskyi Ye.V. Investigation Of Heat Treatment Impact On The Strength Of Al–ti Bimetal Honeycomb Core
(The Paton Welding Journal, 2021, №04) - Falchenko Iu.V., Petrushynets L.V., Polovetskyi Ye.V. Peculiarities Of Producing Al–ti Bimetal Sheet Joints By The Method Of Vacuum Diffusion Welding
(The Paton Welding Journal, 2020, №08) - Falchenko Ju.V., Petrushynets L.V., Polovetskii E.V. Peculiarities Of Producing Layered Metal Composite Materials On Aluminium Base
(The Paton Welding Journal, 2020, №04) - Piskun N.V., Falchenko Yu.V., Petrushinets L.V., Ustinov A.I., Melnichenko T.V., Statkevich I.I. Formation Of The Structure And Mechanical Properties Of Joints Of Tialnb Intermetallic Alloy In Diffusion Welding
(The Paton Welding Journal, 2020, №02) - Falchenko Iu.V., Petrushynets L.V., Melnichenko T.V., Ustinov A.I., Fedorchuk V.E. Vacuum Diffusion Welding Of γ-tial Intermetallic With High-temperature Nickel Alloy With Application Of Intermediate Al/ni Nanolayers
(The Paton Welding Journal, 2019, №10) - Petrushinets L.V., Falchenko Yu.V., Fedorchuk V.E., Shinkarenko V.S. Possibilities Of Manufacturing Three-layer Welded Honeycomb Panels From Aluminium Alloys
(The Paton Welding Journal, 2018, №07) - Falchenko Yu.V., Petrushinets L.V. Modern Methods Of Manufacturing Three-layer Panels Of Aluminium Alloys (review)
(The Paton Welding Journal, 2018, №06) - Falchenko Yu.V., Petrushinets L.V., Fedorchuk V.E. Influence Of Temperature Of Heating In Vacuum On Behaviour Of Oxide Film On The Surface Of G-tial Intermetallic Alloy
(The Paton Welding Journal, 2017, №04) - Gusarova I.A., Potapov A.M., Manko T.A., Falchenko Yu.V., Ustinov A.I., Petrushinets L.V., Melnichenko T.V. Vacuum Diffusion Welding Of Foil From Powder Nickel-chromium Alloy
(The Paton Welding Journal, 2017, №03) - Gusarova I.A., Parko M., Potapov A.M., Falchenko Yu.V., Petrushinets L.V., Melnichenko T.V., Fedorchuk V.E. Evaluation Of High Temperature Resistance Of Three-layer Honeycomb Panel Produced From Yuipm-1200 Alloy By Vacuum Diffusion Welding
(The Paton Welding Journal, 2016, №12) - Ustinov A.I., Falchenko Yu.V., Melnichenko T.V., Petrushinets L.V., Lyapina K.V., Shishkin A.E., Gurienko V.P. Diffusion Welding Of Steel To Tin Bronze Through Porous Interlayers Of Nickel And Copper
(The Paton Welding Journal, 2015, №09) - Ustinov A.I., Falchenko Yu.V., Melnichenko T.V., Petrushinets L.V., Lyapina K.V., Shishkin A.E. Vacuum Diffusion Welding Of Stainless Steel Through Porous Nickel Interlayers
(The Paton Welding Journal, 2015, №07) - Kuzmenko D.N., Ustinov A.I., Kosintsev S.G., Petrushinets L.V. Influence Of Heating Rate On Inflammation Temperature Of Mutlilayer Ti/al Foil
(The Paton Welding Journal, 2014, №10) - Kharchenko G.K., Ustinov A.I., Falchenko Yu.V., Petrushinets L.V., Grigorenko S.G., Kostin V.A., Gurienko V.P. Vacuum Diffusion Welding Of G-tial Intermetallic Alloy To 12kh18n10t Steel
(The Paton Welding Journal, 2012, №04) - Устинов А.И., Фальченко Ю.В., Мельниченко Т.В., Харченко Г.К., Петрушинец Л.В., Шишкин Е.А. Многослойные фольги Ti/Al: способы получения, свойства и применение при сварке давлением... 30
(Electrometallurgy Today, 2012, №01) - Velikoivanenko E.A., Ustinov A.I., Kharchenko G.K., Falchenko Yu.V., Petrushinets L.V., Rozynka G.F. Force Effect On Welded Surfaces Initiated By Running Of Shs Reaction In Nanolayered Interlayer
(The Paton Welding Journal, 2011, №07) - Kharchenko G.K., Ustinov A.I., Falchenko Yu.V., Muravejnik A.N., Melnichenko T.V., Petrushinets L.V. Diffusion Bonding Of G-tial Base Alloy In Vacuum By Using Nanolayered Interlayers
(The Paton Welding Journal, 2011, №03) - Gorban V.F., Kharchenko G.K., Falchenko Yu.V., Petrushinets L.V. Investigation Of Joints Of Titanium Aluminide With Titanium Alloy Vt8 Produced By Diffusion Welding
(The Paton Welding Journal, 2009, №12)
2024.03.01
(2024) Access to first article from the contents of "The Paton Welding Journal" is open.
(2023) Access to all article from the contents of "The Paton Welding Journal" is open.
---
Publication of scientific articles in "The Paton Welding Journal" is free
Starting from 2023.11.05, you can download PDF files of journals for the year 2022!
2021.08.07 Proceedings of X International Conference Mathematical Modeling and Information Technologies in Welding and Related Processes
Official Facebook Page
(2024) Access to first article from the contents of "The Paton Welding Journal" is open.
(2023) Access to all article from the contents of "The Paton Welding Journal" is open.
---
Publication of scientific articles in "The Paton Welding Journal" is free
Starting from 2023.11.05, you can download PDF files of journals for the year 2022!
2021.08.07 Proceedings of X International Conference Mathematical Modeling and Information Technologies in Welding and Related Processes
The most recent issues of journals on the site
Automatic Welding №2 (2024), The Paton Welding Journal №3 (2024), Technical Diagnostics and Non-Destructive Testing №1 (2024), Electrometallurgy Today №1 (2024).Official Facebook Page
